iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12531:2000

(Main)

Castors and wheels - Hospital Bed Castors

Castors and wheels - Hospital Bed Castors

This European standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European standard applies to swivel castors for hospital beds with a wheel diameter of 100 mm or more, which have a central locking device. Swivel castors may be used with the main principal dimensions.

Räder und Rollen - Krankenbettenrollen

Diese Europäische Norm legt die technischen Anforderungen, die geeigneten Abmessungen und die Anforderungen für die Prüfungen fest. Diese Europäische Norm gilt für Lenkrollen für Krankenbetten mit einem Raddurchmesser von 100 mm oder mehr, einschließlich Zentralfeststeller. Andere Lenkrollen mit vergleichbaren Abmessungen können ebenfalls angewendet werden.

Roues et roulettes - Roulettes pour lits d'hôpitaux

La présente norme européenne spécifie les prescriptions techniques, les dimensions appropriées et les prescriptions pour la réalisation des essais. La présente norme européenne s'applique aux roues et roulettes pivotantes pour lits d'hôpitaux avec un diametre de roue supérieur ou égal a 100 mm, qui ont un systeme de blocage central. Les roulettes pivotantes peuvent etre utilisées avec les dimensions principales courantes.

Castors and wheels - Hospital Bed Castors

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
11.140 - Hospital equipment
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Ref Project
EN 12531:1998 - Castors and wheels - Hospital Bed Castors

Buy Standard

EN 12531:2000EN 12531:2000
PreviousNext
Standard
EN 12531:2000
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Castors and wheels - Hospital Bed CastorsRäder und Rollen - KrankenbettenrollenRoues et roulettes - Roulettes pour lits d'hôpitauxCastors and wheels - Hospital Bed Castors11.140Oprema bolnišnicHospital equipmentICS:Ta slovenski standard je istoveten z:EN 12
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 455-1:2020+A1:2022(Main)
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
EN 455-1:2020+A1:2022

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 14237:2022(Main)
Textiles for healthcare and social services facilities
CEN/TS 14237:2021

This Technical Specification recommends characteristics, test methods and minimum performance specifications for unused textile for the healthcare and social service facilities (hospitals, residential care homes, etc.) to give guidance on the suitability of products intended to be maintained by industrial laundering.
This Technical Specification is not applicable to surgical textiles under the medical devices directive nor protective clothing under the PPE directive.

  • Technical specification
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-35:2021(Main)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 60601-2-35:2020)
EN IEC 60601-2-35:2021

EN-IEC 60601-2-35 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to pre warm a bed are included in the scope of this document. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to be applicable to a specifically defined typeof ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document,except in 7.2.13 and 8.4.1 of the general standard.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-46:2020(Main)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables (IEC 60601-2-46:2016)
EN IEC 60601-2-46:2019

IEC 60601-2-46:2010 specifies safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This second edition cancels and replaces the first edition published in 1998 and constitutes a technical revision. This edition of IEC 60601-2-46 was revised to align structurally with the 2005 edition of IEC 60601-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14683:2019+AC:2019(Main)
Medical face masks - Requirements and test methods
EN 14683:2019+AC:2019

This document specifies construction, design, performance requirements and test methods for medical face masks intended to limit the transmission of infective agents from staff to patients during surgical procedures and other medical settings with similar requirements. A medical face mask with an appropriate microbial barrier can also be effective in reducing the emission of infective agents from the nose and mouth of an asymptomatic carrier or a patient with clinical symptoms.
This European Standard is not applicable to masks intended exclusively for the personal protection of staff.
NOTE 1   Standards for masks for use as respiratory personal protective equipment are available.
NOTE 2   Annex A provides information for the users of medical face masks.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13795-2:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
EN 13795-2:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable clean air suits used as medical devices for clinical staff, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of clean air suits and sets performance requirements for these products.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13795-1:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
EN 13795-1:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable surgical gowns and surgical drapes used as medical devices for patients, clinical staff and equipment, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of surgical drapes and gowns and sets performance requirements for these products.
EN 13795-1 does not cover requirements for resistance to penetration by laser radiation of products. Suitable test methods for resistance to penetration by laser radiation, together with an appropriate classification system, are given in EN ISO 11810.
EN 13795-1 does not cover requirements for incise drapes or films.
EN 13795-1 does not cover requirements for antimicrobial treatments for surgical gowns and drapes. Antimicrobial treatment may cause environmental risks such as resistance and pollution. However, antimicrobial treated surgical gowns and drapes fall under the scope of this standard with respect to their use as surgical gowns and drapes.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16244:2018(Main)
Ventilation for hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals
CEN/TS 16244:2018

This Technical Specification sets out the structure for a standard related to ventilation in hospitals. It gives the requirements for the drafting of the parts of the standard, including common terms and definitions.
The standard for ventilation in hospitals is intended for all healthcare premises where healthcare services are delivered. It is applicable for healthcare services located in a hospital, clinic or other premises. It includes general and specific risk areas, and provides defined levels of air quality/cleanliness for classification of these areas. The standard gives minimum requirements for ventilation systems. It specifies how to the design, installation, operation, qualification process and maintenance of the ventilation systems.

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16953:2018(Main)
Medical gloves for single use - Guidance for selection
CEN/TR 16953:2017

This Technical Report provides information for those choosing or using sterile and non-sterile gloves for medical applications based on a risk assessment. It deals with gloves worn primarily for the protection of the patient and glove user from biological cross contamination.
NOTE   Gloves worn specifically for the protection of the glove user from e.g. chemical and biological hazards are covered by the EU-Directive on Personal Protective Equipment (PPE) and the related standards e.g. EN 16523 1, EN 374-2, EN 374-4, EN ISO 374-1and EN ISO 374-5.
This document describes the rationale behind the requirements of the EN 455 series and explores the possible trade-offs in glove selection between the various factors which affect glove, physical properties, biocompatibility, comfort and sensitivity. The strengths and weaknesses of various alternative glove materials and the potential biological hazards presented by their use are also explored.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50637:2018(Main)
Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
EN 50637:2017

This Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL BEDS, hereafter referred to as MEDICAL BEDS as defined in 201.3.218, intended for CHILDREN as defined in 201.3.207, and ADULTS with atypical anatomy (ADULTS ranging outside the definition for ADULTS in 201.3.201).
This standard applies to medical beds with nonadjustable and electrical / mechanical adjustable functions.
This Standard applies to MEDICAL BEDS with an internal length of up to 180 cm suitable to a body length of 155 cm.
NOTE 1   The limitation of 180 cm is in order to minimize the foreseeable misuse, of a parent sharing the bed with the child or that the bed will be used by an ADULT.
If a manufacturer wishes to make a bed that can be used by both a child and an ADULT, e.g. length of 180 cm or more, then it will fulfil both EN 60601-2-52 and this particular standard.
This Standard does not apply to MEDICAL BEDS intended for ADULTS as defined in 201.3.201 (covered by EN 60601-2-52).
This Standard does not apply to :
-   incubators covered by EN 60601-2-19 ;
-   beds for children, covered by EN 716-1 and EN 716-2 ;
-   cribs and cradles covered by EN 1130 (all parts) ;
-   bunk beds and high beds, covered by EN 747-1 and 747-2.
If a clause or subclause is specifically intended to be applicable to a MEDICAL BED only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to MEDICAL BEDS and to ME SYSTEMS, as relevant.
HAZARDS inherent in the intended physiological function of MEDICAL BED or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of EN 60601-1:2006.
NOTE 2   See also 4.2 of EN 60601-1:2006.
NOTE 3   Body length is measured from crown to sole.
1.2 Object
The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements and test methods for MEDICAL BEDS as defined in 201.3.218 intended for CHILDREN as defined in 201.3.207.
(...)

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day