SIST EN 3373-011:2009

Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard

This standard defines the characteristics of nickel plated copper ring shaped terminals for crimping on nickel plated copper conductors. They are for use on both metric and inch dimension studs at temperatures up to 260 °C maximum.
This standard should be used in conjunction with EN 3373-001.

Luft- und Raumfahrt - Kabelschuhe und Verlängerungen für das Crimpen auf elektrische Leiter - Teil 011: Kabelschuhe, ringförmig, (vernickelt) für das Crimpen auf Kupferleitungen, Betriebstemperatur bis 260 °C für metrische und zöllige Gewindebolzen - Produktnorm

Diese Norm legt die Eigenschaften von vernickelten, ringförmigen Kabelschuhen aus Kupfer für das Crimpen
auf vernickelten Kupferleitungen fest. Sie werden sowohl für metrische als auch für Inch-Gewindebolzen bei
Betriebstemperaturen bis maximal 260 °C eingesetzt.
Diese Norm sollte in Verbindung mit EN 3373-001 angewendet werden.

Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs électriques - Partie 011: Cosses, rondes, nickelées pour sertissage sur conducteurs en cuivre, température jusqu'à 260 °C pour bornages filetés en métriques et en pouces - Normes de produit

Aeronavtika - Kabelski čevlji in spojne tulke za spajanje s stiskanjem na električne vodnike - 011. del: Kabelski čevlji, obročasti, ponikljani, za stiskanje na bakrene vodnike, temperatura do največ 260 °C, za metrske in colske serije navojnih stebel - Standard za proizvod

General Information

• Status: Published
• Publication Date: 17-Mar-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Mar-2009
• Due Date: 15-May-2009
• Completion Date: 18-Mar-2009
• Ref Project: EN 3373-011:2009 - Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Kabelschuhe und Verlängerungen für das Crimpen auf elektrische Leiter - Teil 011: Kabelschuhe, ringförmig, (vernickelt) für das Crimpen auf Kupferleitungen, Betriebstemperatur bis 260 °C für metrische und zöllige Gewindebolzen - ProduktnormSérie aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs
électriques - Partie 011: Cosses, rondes, nickelées pour sertissage sur conducteurs en cuivre, température jusqu'à 260 °C pour bornages filetés en métriques et en pouces - Normes de produitAerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3373-011:2009SIST EN 3373-011:2009en01-maj-2009SIST EN 3373-011:2009SLOVENSKI
STANDARD



SIST EN 3373-011:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3373-011
February 2009 ICS 49.060 English Version
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs
électriques - Partie 011: Cosses, rondes, nickelées pour sertissage sur conducteurs en cuivre, température jusqu'à 260 °C pour bornages filetés en mériques et en pouces - Normes de produit
Luft- und Raumfahrt - Kabelschuhe und Verlängerungen für das Crimpen auf elektrische Leiter - Teil 011: Kabelschuhe, ringförmig, (vernickelt) für das Crimpen auf Kupferleitungen, Betriebstemperatur bis 260 °C für metrische und zöllige Gewindebolzen - Produktnorm This European Standard was approved by CEN on 11 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3373-011:2009: ESIST EN 3373-011:2009



EN 3373-011:2009 (E) 2
Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Characteristics .45Dimensions and mass .46Designation .87Quality assurance .88Details of assembly tooling .98.1Crimping tools .98.2Die dimensions .99Marking .910Packaging .9 SIST EN 3373-011:2009



EN 3373-011:2009 (E) 3 Foreword This document (EN 3373-011:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This standard was reviewed by the Domain Technical Coordinator of ASD-STAN's Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STAN's General Process Manual, this standard has received approval for Publication. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3373-011:2009



EN 3373-011:2009 (E) 4 1 Scope This standard defines the characteristics of nickel plated copper ring shaped terminals for crimping on nickel plated copper conductors. They are for use on both metric and inch dimension studs at temperatures up to 260 °C maximum. This standard should be used in conjunction with EN 3373-001. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any
...