SIST EN 12516-4:2015/oprA1:2016

Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

This European Standard specifies the calculation method for valve shells manufactured in metallic materials other than steel. The loadings to be accounted for are in accordance with EN 12516-2. Design methods are in accordance with EN 12516-2, design by formulae according to the relevant clauses.

Industriearmaturen - Gehäusefestigkeit - Teil 4: Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus anderen metallischen Werkstoffen als Stahl

Diese Europäische Norm legt das Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus anderen metallischen Werkstoffen als Stahl fest. Die zu berücksichtigenden Beanspruchungen müssen EN 12516-2 entsprechen.
Konstruktionsverfahren müssen EN 12516-2 und die Konstruktionsberechnung den jeweiligen zutreffenden Abschnitten entsprechen.

Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4: Méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l'acier

La présente Norme Européenne spécifie la méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l’acier. Les cas de charge à prendre en compte sont conformes à l’EN 12516-2.
Les méthodes de conception sont conformes à l'EN 12516-2, pour la conception par formules selon les paragraphes appropriés.

Industrijski ventili - Trdnost ohišja - 4. del: Metoda za izračun ohišij kovinskih ventilov, ki niso iz jekla - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 07-Dec-2016
• ICS: 23.060.01 - Valves in general
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 07-Nov-2018
• Due Date: 12-Nov-2018
• Completion Date: 07-Nov-2018
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 12516-4:2014/FprA1 - Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

Relations

• Consolidated By: SIST EN 12516-4:2015+A1:2018 - Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12516-4:2015 - Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
• Effective Date: 01-Nov-2016
• Consolidated By: SIST EN 12516-4:2015+A1:2018 - Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12516-4:2015/oprA1:2016
01-november-2016
,QGXVWULMVNLYHQWLOL7UGQRVWRKLãMDGHO0HWRGD]DL]UDþXQRKLãLMNRYLQVNLK
YHQWLORYNLQLVRL]MHNOD'RSROQLOR$
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells
manufactured in metallic materials other than steel
Industriearmaturen - Gehäusefestigkeit - Teil 4: Berechnungsverfahren für drucktragende
Gehäuse von Armaturen aus anderen metallischen Werkstoffen als Stahl
Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4: Méthode de
calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques
autres que l'acier
Ta slovenski standard je istoveten z: EN 12516-4:2014/prA1
ICS:
23.060.01 Ventili na splošno Valves in general
SIST EN 12516-4:2015/oprA1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12516-4:2015/oprA1:2016

---------------------- Page: 2 ----------------------

SIST EN 12516-4:2015/oprA1:2016


DRAFT
EUROPEAN STANDARD
EN 12516-4:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
November 2016
ICS 23.060.01
English Version

Industrial valves - Shell design strength - Part 4:
Calculation method for valve shells manufactured in
metallic materials other than steel
Robinetterie industrielle - Résistance mécanique des Industriearmaturen - Gehäusefestigkeit - Teil 4:
enveloppes - Partie 4 : Méthode de calcul relative aux Berechnungsverfahren für drucktragende Gehäuse von
enveloppes d'appareils de robinetterie en matériaux Armaturen aus anderen metallischen Werkstoffen als
métalliques autres que l'acier Stahl
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 69.

This draft amendment A1, if approved, will modify the European Standard EN 12516-4:2014. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12516-4:2014/prA1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12516-4:2015/oprA1:2016
EN 12516-4:2014/prA1:2016 (E)
Contents Page
European foreword . 3
1 Modification to 5.2.3, Pressure/temperature ratings for cast iron . 4
2 Modification to 5.5.2, Materials other than aluminium . 4
3 Modification to Annex ZA (informative), Relationship between this European
Standard and the Essential Requirements of EU Directive 97/23/EC (PED) . 5

2

---------------------- Page: 4 ----------------------

SIST EN 12516-4:2015/oprA1:2016
EN 12516-4:2014/prA1:2016 (E)
European foreword
This document (EN 12516-4:2014/prA1:2016) has been prepared by Technical Committee CEN/TC 69
“Industrial valves”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
T
...