SIST EN 4377:2015

Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm

This European Standard specifies the requirements relating to:
Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668)
Non heat treated
Forging stock
a or D ≤ 300 mm
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung NiCr19Fe19Nb5Mo3 (2.4668) - Schmiedezustand - Schmiedevormaterial - a oder D ≤ 300 mm

Diese Norm legt die Anforderungen an:
Hochwarmfeste Legierung NiCr19Fe19Nb5Mo3 (2.4668)
Schmiedezustand
Schmiedevormaterial
a oder D ≤ 300 mm
zur Anwendung in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud NiCr19Fe19Nb5Mo3 (2.4668) - Non traité - Produits destinés à la forge - a ou D ≤ 300 mm

Cette Norme européenne spécifie les exigences relatives à :
Alliage résistant à chaud NiCr19Fe19Nb5Mo3 (2.4668)
Non traité
Produits destinés à la forge
a ou D <= 300 mm
pour les applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina NiCr19Fe19Nb5Mo3 (2.4668) - Toplotno neobdelana - Material za kovanje - a ali D ≤ 300 mm

Ta evropski standard določa zahteve glede:
Toplotno odporne zlitine NiCr19Fe19Nb5Mo3 (2.4668)
Toplotno neobdelane
Materiala za kovanje
a ali D ≤ 300 mm
za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 18-Oct-2015
• ICS: 49.025.01 - Materials for aerospace construction in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Sep-2015
• Due Date: 23-Nov-2015
• Completion Date: 19-Oct-2015
• Ref Project: EN 4377:2015 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in generalICS:Ta slovenski standard je istoveten z:EN 4377:2015SIST EN 4377:2015en,fr,de01-november-2015SIST EN 4377:2015SLOVENSKI
STANDARD



SIST EN 4377:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4377
September
t r s w ICS
v {ä r t wä r s English Version
Aerospace series æ Heat resisting alloy on heat treated æ Forging stock æ a or D 
u r r mm Série aérospatiale æ Alliage résistant à chaud destinés à la forge æ a ou D 
u r r mm
Luftæ und Raumfahrt æ Hochwarmfeste Legierung Schmiedevormaterial æ a oder D 
u r r mm This European Standard was approved by CEN on
z November
t r s vä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v u y yã t r s w ESIST EN 4377:2015



EN 4377:2015 (E) 2 Contents
Page European foreword . 3 Introduction . 4 1 Scope . 4 2 Normative references . 4
SIST EN 4377:2015



EN 4377:2015 (E) 3 European foreword This document (EN 4377:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
...