SIST EN 2043:2014

Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)

This specification defines the general requirements for semi-finished product qualification of EN metallic materials (excluding forgings and castings).
Specific requirements are given in the material standards and/or relevant technical specification.

Luft- und Raumfahrt - Metallische Werkstoffe - Allgemeine Anforderungen an die Qualifizierung von Halbzeug (ausgenommen Schmiedestücke und Gussstücke)

Diese Spezifikation legt die allgemeinen Anforderungen an die Qualifizierung von Halbzeug (ausgenommen Schmiedestücke und Gußstücke) von metallischen EN Werkstoffen fest.
Besondere Anforderungen sind in den Werkstoffnormen und/oder in den entsprechenden Technischen Lieferbedingungen angegeben.

Série aérospatiale - Matériaux métalliques - Exigences générales pour la qualification des demi-produits (à l'exclusion des pièces forgées, matricées ou moulées)

Aeronavtika - Kovinski materiali - Splošne zahteve za kvalifikacijo polizdelkov (razen izkovkov in odlitkov)

General Information

• Status: Published
• Publication Date: 10-Feb-2014
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Jan-2014
• Due Date: 13-Mar-2014
• Completion Date: 11-Feb-2014
• Ref Project: EN 2043:2013 - Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)

Overview

EN 2043:2013 - "Aerospace series - Metallic materials - General requirements for semi‑finished product qualification (excluding forgings and castings)" is a CEN European Standard prepared by ASD‑STAN. It defines the general requirements and procedural framework for qualification of semi‑finished metallic products used in aerospace applications (excluding forgings and castings). The standard is intended to be used together with the relevant EN material standards and/or a technical specification per EN 4258.

Key topics and requirements

• Scope and applicability
  • Covers semi‑finished products (called “product” in the standard) for aerospace metallic materials, excluding forged and cast products.
  • Intended for use in conjunction with material‑specific standards and technical specifications.
• Quality assurance
  • Requires an approved quality system (see EN 9100 / EN ISO 9001 references).
  • Product qualification follows EN 9133 procedures.
• Product qualification process
  • Qualification testing shall follow the requirements given in the relevant material standard (notably “line 100” requirements).
  • The product used for qualification must be manufactured on the same equipment and according to the same process as serial production.
  • Results and manufacturing schedule must be recorded in a qualification test report (manufacturer details, product, schedule, material standard, delivery condition, cast/batch numbers, test and re‑test results).
  • Successful qualifications are recorded at www.ASD-cert.org.
• Manufacturer and product categories
  • Definitions provided for established manufacturer/product and new manufacturer/product, with implications for required test scope and data.
• Testing, re‑tests and interpretation
  • Full testing is required for new products or new manufacturers; waivers or reductions may be allowed if sufficient prior qualification data exist.
  • Re‑tests are required for non‑conforming results; mandated body determines acceptability and may refuse qualification if tests fail.
  • The mandated body has discretion in interpreting requirements, exemptions and dispute resolution.
• Administrative requirements
  • A safety data sheet must be provided prior to qualification testing (if applicable).

Applications and who uses it

• Aerospace semi‑finished product manufacturers and suppliers seeking qualification for metallic materials.
• Quality managers and compliance teams implementing aerospace quality systems.
• Procurement and engineering teams specifying qualified material sources for airframe, avionics structures and defense programs.
• Test laboratories and certification/mandated bodies conducting product qualification and audits.
• Users requiring assurance of material provenance, manufacturing process control and documented test evidence.

Related standards

• EN 4258 (organization of EN metallic material standards)
• EN 9100 / EN ISO 9001 (quality management systems)
• EN 9133 (product qualification procedure for aerospace standard parts)

Keywords: EN 2043:2013, semi‑finished product qualification, aerospace metallic materials, CEN, ASD‑STAN, product qualification tests, aerospace quality assurance.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kovinski materiali - Splošne zahteve za kvalifikacijo polizdelkov (razen izkovkov in odlitkov)Luft- und Raumfahrt - Metallische Werkstoffe - Allgemeine Anforderungen an die Qualifizierung von Halbzeug (ausgenommen Schmiedestücke und Gussstücke)Série aérospatiale - Matériaux métalliques - Exigences générales pour la qualification des demi-produits (à l'exclusion des pièces forgées, matricées ou moulées)Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)49.025.15Neželezove zlitine na splošnoNon-ferrous alloys in general49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 2043:2013SIST EN 2043:2014en01-marec-2014SIST EN 2043:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2043
July 2013 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings)
Série aérospatiale - Matériaux métalliques - Exigences générales pour la qualification des demi-produits (à l'exclusion des pièces forgées, matricées ou moulées)
Luft- und Raumfahrt - Metallische Werkstoffe - Allgemeine Anforderungen an die Qualifizierung von Halbzeug (ausgenommen Schmiedestücke und Gussstücke) This European Standard was approved by CEN on 8 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2043:2013: ESIST EN 2043:2014
...