SIST EN 61969-2:2002

Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2: Sectional specification - Coordination dimensions for cases and cabinets

Specifies the internal and external coordination dimensions and pitches for outdoor enclosures consisting of cases and cabinets. Is applicable for the development of detail specifications for cases and cabinets exposed to the outdoor environment on non-weather-protected locations.

Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse -- Teil 2: Strukturnorm - Koordinationsmaße für Schränke und Gestelle

Structures mécaniques pour équipement électronique - Enveloppes de plein air -- Partie 2: Spécification intermédiaire - Dimensions de coordination pour baies et coffrets

Spécifie les pas et les dimensions de coordination intérieures et extérieures pour les enveloppes de plein air consistant en baies et coffrets. Est applicable au développement de spécifications particulières pour les baies et les coffrets soumis à l'environnement de plein air dans des lieux exposés aux intempéries.

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Sectional specification - Coordination dimensions for cases and cabinets (IEC 61969-2:2000)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 21-May-2018
• ICS: 31.240 - Mechanical structures for electronic equipment
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Mar-2018
• Due Date: 19-Apr-2018
• Completion Date: 22-May-2018
• Ref Project: EN 61969-2:2000 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Sectional specification - Coordination dimensions for cases and cabinets

Relations

• Revised: SIST EN 61969-2:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
• Effective Date: 30-Nov-2010
• Replaced By: SIST EN 61969-2:2012 - Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61969-2:2002
01-september-2002
Mechanical structures for electronic equipment - Outdoor enclosures - Part 2:
Sectional specification - Coordination dimensions for cases and cabinets (IEC
61969-2:2000)
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2: Sectional
specification - Coordination dimensions for cases and cabinets
Mechanische Bauweisen für elektronische Einrichtungen - Außengehäuse -- Teil 2:
Strukturnorm - Koordinationsmaße für Schränke und Gestelle
Structures mécaniques pour équipement électronique - Enveloppes de plein air -- Partie
2: Spécification intermédiaire - Dimensions de coordination pour baies et coffrets
Ta slovenski standard je istoveten z: EN 61969-2:2000
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN 61969-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61969-2:2002

---------------------- Page: 2 ----------------------

SIST EN 61969-2:2002

---------------------- Page: 3 ----------------------

SIST EN 61969-2:2002

---------------------- Page: 4 ----------------------

SIST EN 61969-2:2002

---------------------- Page: 5 ----------------------

SIST EN 61969-2:2002

---------------------- Page: 6 ----------------------

SIST EN 61969-2:2002
NORME CEI
INTERNATIONALE IEC
61969-2
INTERNATIONAL
Première édition
STANDARD
First edition
2000-01
Structures mécaniques pour équipement
électronique – Enveloppes de plein air –
Partie 2:
Spécification intermédiaire –
Dimensions de coordination pour baies et coffrets
Mechanical structures for electronic equipment –
Outdoor enclosures –
Part 2:
Sectional specification –
Coordination dimensions for cases and cabinets
 IEC 2000 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
K
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61969-2:2002
61969-2  IEC:2000 – 3 –
CONTENTS
Page
FOREWORD . 5
INTRODUCTION .9
Clause
1 Scope and object . 11
2 Normative references. 11
3 Arrangement overview . 13
4 Coordination dimensions – Dimensioning of cases and cabinets . 15
Figure 1 – Arrangement overview. 13
Figure 2 – Outdoor case or cabinet coordination dimensions. 15
Bibliography . 19

---------------------- Page: 8 ----------------------

SIST EN 61969-2:2002
61969-2  IEC:2000 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT –
OUTDOOR ENCLOSURES –
Part 2: Sectional specification –
Coordination dimensions for cases and cabinets
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61969-2 has been prepared by subcommittee 48D: Mechanical
structures for electronic equipment, of IEC technical committee 48: Electromechanical
components and mechanical structures for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
48D/212/FDIS 48D/218/RVD
Full information on the voting for the approval of this standard can be foun
...