SIST EN 3155-019:2020

Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard

This document specifies the required characteristics, tests and tooling applicable to female contacts 019, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-018.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 019: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Dieses Dokument legt die Anforderungen, Prüfungen und Werkzeuge für Buchsenkontakte 019, Typ A, crimpbar, Klasse S, zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Es ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Stiftkontakte sind in EN 3155 018 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 019 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques femelles 019, de type A, à sertir, de classe S, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il doit être utilisé conjointement avec l’EN 3155-001.
Les contacts mâles associés sont définis dans l’EN 3155-018.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 019. del: Kontakti, električni, ženski, tip A, stisljivi, razred S - Standard za proizvod

Ta dokument določa zahtevane značilnosti, preskuse in orodja za ženske kontakte velikosti 019, tipa A, nagubane, razreda S, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002. Uporabljati ga je treba skupaj s standardom EN 3155-001. Povezani moški kontakti so določeni v standardu EN 3155-018.

General Information

• Status: Published
• Publication Date: 09-Jan-2020
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Dec-2019
• Due Date: 23-Feb-2020
• Completion Date: 10-Jan-2020
• Ref Project: EN 3155-019:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard

Relations

• Revised: SIST EN 3155-019:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 24-Aug-2016
• Replaces: SIST EN 3155-019:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 18-Dec-2019
• Replaces: SIST EN 3155-019:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 019: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-019:2020
01-februar-2020
Nadomešča:
SIST EN 3155-019:2006
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 019. del:
Kontakti, električni, ženski, tip A, stisljivi, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 019:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 019: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
019 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-019:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-019:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3155-019:2020

---------------------- Page: 2 ----------------------
SIST EN 3155-019:2020


EN 3155-019
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-019:2005
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 019: Contacts, electrical, female, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 019 : Contacts Verwendung in Verbindungselementen - Teil 019:
électriques, femelles, type A, à sertir, classe S - Norme Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse
de produit S - Produktnorm
This European Standard was approved by CEN on 13 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-019:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3155-019:2020
EN 3155-019:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
5 Designation . 16
6 Marking . 16
7 Technical specification . 16

2

---------------------- Page: 4 ----------------------
SIST EN 3155-019:2020
EN 3155-019:2019 (E)
European foreword
This document (EN 3155-019:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2020, and conflicting national standards shall be withdrawn at
the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-019:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 3155-019:2020
EN 3155-019:2019 (E)
1 Scope
This document specifies the required characteristics, tests and tooling applicable to female contacts 019,
type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-018.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591*, Aerospace series — Elements of electrical and optical connection — Test methods — General
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-018, Aerospace series — Electrical contacts used in elements of connection — Part 018 Contacts,
electrical, male, type A, crimp, class S — Product standard
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product
standard (Normal and tight tolerances)
1)
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
2)
SAE-AS22520, Crimping tools, wire termination, general specification for
2)
SAE-AS81969, Installing and removal tools, connector electrical contact, general specification for
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3155-001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at http://www.iso.org/obp
• IEC Electropedia: available at http://www.electropedia.org/

* All its parts quoted in this standard.
1) Published by: ISO International Organization for Standardization, http://www.iso.ch/
2) Published by: SAE National (US) Society of Automotive Engineers, http://www.sae.org/
4

---------------------- Page: 6 ----------------------
SIST EN 3155-019:2020
EN 3155-019:2019 (E)
4 Required characteristics
4.1 Specific characteristics
Type A contacts are for general application and class S corresponds to an operating temperature range
from − 65 °C to 200 °C.
4.2 Dimensions and mass
See Figure 1 and Table 1.
Dimensions and tolerances are given in millimetres and apply after surface treatment.
5

---------------------- Page: 7 ----------------------
SIST EN 3155-019:2020
EN 3155-019:2019 (E)

Key
1 One side only
2 This dimension represents the length to allow full pin engagement.
3 Ø F represents the bore.
4 This dimension represents the clearance between sleeve and body of the contact.
5 Colour bands, see Table 2
6 The max entry diameter shall be compliant with the value defined in EN 3155-001 test EN 2591-502.
Restricted entry.
7 Position of the first point and the maximum length of electrical contact (point at which a square ended minimum
gauge pin of the same basic diameter as the mating contact first engages the female contact spring member)
See EN 3155-001 for active area definition.
8 Female active area: See EN 3155-001 for definition.
Figure
...