Electrical relays - Tests and measurements - Part 16: Soldering

Elektrische Relais – Mess- und Prüfverfahren – Teil 16: Löten

Relais électriques - Essais et mesurages - Partie 16: Brasage

Električni releji - Preskusi in meritve -16. del: Spajkanje

General Information

Status
Not Published
Public Enquiry End Date
08-Feb-2024
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
25-Sep-2024
Due Date
13-Nov-2024

Buy Standard

Draft
prEN IEC 63522-16:2024
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN IEC 63522-16:2024
01-februar-2024
Električni releji - Preskusi in meritve -16. del: Spajkanje
Electrical relays - Tests and measurements - Part 16: Soldering
Relais électriques - Essais et mesurages - Partie 16: Brasage
Ta slovenski standard je istoveten z: prEN IEC 63522-16:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 63522-16:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 63522-16:2024
oSIST prEN IEC 63522-16:2024
94/965/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63522-16 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-17 2024-02-09
SUPERSEDES DOCUMENTS:
94/900/CD, 94/960/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING
NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses
to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC
clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrical relays - Tests and Measurements - Part 16: Soldering

PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
The project number was changed from 61810-7-16 to 63522-16 according to decision 23/04 taken at the TC 94
Plenary on September 15th 2023. See the 94/962/RM.

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.

oSIST prEN IEC 63522-16:2024
94/965/CDV – 2 – IEC CDV 63522-16 © IEC 2023
1 CONTENTS
3 FOREWORD .3
4 1 Scope .5
5 2 Normative references .5
6 3 Terms and definitions .5
7 4 Test procedure .6
8 4.1 Purpose .6
9 4.2 Procedure .6
10 Resistance to soldering heat .6
11 Resistance to standard industrial soldering processes .7
12 Solderability, wetting – Wetting balanced method .9
13 4.3 Conditions . 10
14 5 Evaluation . 10
15 Annex T (informative) Test report . 11
16 Bibliography . 12
18 Figure 1 – Double wave soldering profile .8
19 Figure 2 – SMT and through hole soldering profile .9
21 Table 1 – Test conditions for test Tb .7
oSIST prEN IEC 63522-16:2024
IEC CDV 63522-16 © IEC 2023 – 3 – 94/965/CDV
25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
28 Electrical relays –
29 Tests and Measurements
31 Part 7-16: Soldering
33 FOREWORD
34 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
35 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
36 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
37 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
38 Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC
39 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
40 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
41 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
42 the two organizations.
43 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
44 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
45 Committees.
46 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
47 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
48 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
49 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
50 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
51 the corresponding national or regional publication shall be clearly indicated in the latter.
52 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
53 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
54 independent certification bodies.
55 6) All users should ensure that they have the latest edition of this publication.
56 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
57 technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
58 whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,
59 or reliance upon, this IEC Publication or any other IEC Publications.
60 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
61 for the correct application of this publication.
62 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
63 IEC shall not be held responsible for identifying any or all such patent rights.
64 The International Standards of the IEC 61810 have been prepared by IEC technical committee
65 94: All-or-nothing electrical relays.
66 The text of this International Standard is based on the following documents:
CD CC
94/900/CD 94/960/CC
68 Full information on the voting for the approval of this International Standard can be found in the
69 report on voting indicated in the above table.

oSIST prEN IEC 63522-16:2024
94/965/CDV – 4 – IEC CDV 63522-16 © IEC 2023
70 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
71 A list of all parts of IEC 61810 series, published under the general title Electromechanical
72 elementary relays, can be found on the IEC website.
73 This International Standard is to be used in conjunction with IEC 61810-1:2015.
74 The committee has decided that the contents of this document will remain unchanged until the
75 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
76 the specific document. At this date, the document will be
77 • reconfirmed
78 • withdrawn,
79 • replaced by a revised edition, or
80 • amended.
oSIST prEN IEC 63522-16:2024
IEC CDV 63522-16 © IEC 2023 – 5 – 94/965/CDV
83 Electrical relays –
84 Tests and Measurements
86 Part 7-16: Soldering
90 1 Scope
91 This part of IEC 61810-7 is used for testing along with the appropriate severities and conditions
92 for measurements and tests designed to assess the ability of specimens to perform under
93 expected conditions of transportation, storage and all aspects of operational use.
94 The object of this test is to define a standard test method for resistance to soldering heat and
95 solderability for standard soldering processes.
96 2 Normative references
97 The following documents are referred to in the text in such a way that some or all of their content
98 constitutes requirements of this document. For dated references, only the edition cited applies.
99 For undated references, the latest edition of the referenced document (including any
100 amendments) applies.
101 IEC 60068-2-20:2021, Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods
102 for solderability and resistance to soldering heat of devices with leads
103 IEC 60068-2-54:2021, Environmental testing - Part 2-54: Tests – Test Ta Solderability testing
104 of electronic components by the wetting balance method
105 IEC 61760-1:2006, Surface mounting technology - Part 1: Standard method for the specification
106 of surface mounting components (SMDs)
107 IEC 61810-7-0:X, Electrical relays – Tests and measurements - Part 7-0: Testing – General and
108 Guidance
109 IEC 61810-7-0:7, Electrical relays – Tests and measurements - Part 7-7: Testing – Functional
110 tests
111 3 Terms and definitions
112 For the purpose of this document, the terms and definitions defined in clause 3 of IEC 61810-7-0 and
113 the following apply.
114 3.1
115 SMD
116 SMD is the abbreviation for Surface mounted Devices.
oSIST prEN IEC 63522-16:2024
94/965/CDV – 6 – IEC CDV 63522-16 © IEC 2023
118 4 Test procedure
119 These standard methods are a basic qualification for the resistance of solder processes under
120 standard conditions or individually as defined by the manufacturer.
121 NOTE The final product fitting the selected solder process must be investigated by the user under their responsibility.
122 NOTE The conditions of IEC60068-2-20 are recommended, but if soldering is difficult, the conditions shall be stated
123 individually by the manufacturer.
124 Any deviate from the given test conditions or process shall be explicitly described in the test
125 report. In such case it is not allowed to reference a test as according to this document.
126 In case of any deviation the test report shall be named as “similar to”.
127 4.1 Purpose
128 To determine the ability of relay terminals
129 • the ability of relay terminals to wet easily with solder,
130 • and/or the ability of the relay to withstand soldering heat
131 Solder terminals and their supports shall have a sufficient resistance to any soldering heat.
132 These tests are only applicable to relays and to relays where the manufacturer has specified
133 the ability of terminations to a soldering process.
134 NOTE there are some industrial relays know where the terminal could be used in conjunction with flat-quick connector as
135 well as direct wire soldered.
136 4.2 Procedure
137 The following soldering heat resistance test are defined as standard test for relays.
138 Resistance to soldering heat
139 Method - Soldering iron method
140 4.2.1.1.1 Purpose
141 The object of this test is to evaluate the solderability of relay terminations and ability to
142 withstand the heating stress produced by soldering iron.
143 4.2.1.1.2 Procedure
144 The test is carried out according to test Tb of IEC 60068-2-20 as given in Table 1 for method 2
145 or the conditions individually specified by the manufacturer.
146 Note: The conditions of IEC60068-2-20 are recommended, but if soldering is difficult, the conditions shall be stated individually
147 by the manufacturer.
148 Functional test according to IEC 61810-7-7 shall be performed before as well after the soldering.
149 Method - Solder bath
150 4.2.1.2.1 Purpose
151 The object of this test is to detail standard test method to evaluate the solderability of relay
152 terminations to withstand the heating stresses produced by a mass soldering operation.

oSIST prEN IEC 63522-16:2024
IEC CDV 63522-16 © IEC 2023 – 7 – 94/965/CDV
153 4.2.1.2.2 Procedure
154 The test is carried out according to te
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.