SIST EN 14327:2004
(Main)Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather
Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather
This European Standard specifies a method of determining the abrasion resistance of upholstery leathers. This method, "Taber Test", is often specified by automotive manufacturers for automotive upholstery.
Leder - Physikalische und mechanische Prüfungen - Bestimmung des Abriebwiderstandes von Polsterleder in Kraftfahrzeugen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Reibechtheit von Polsterleder fest. Dieses Verfahren, "Taber-Prüfung", wird häufig von Kraftfahrzeugherstellern für die Prüfung von Polsterwaren in Kraftfahr-zeugen vorgegeben.
Cuir - Essais physique et mécanique - Détermination de la résistance a l'abrasion du cuir pour l'automobile
La présente Norme européenne fixe une méthode de détermination de la résistance a l'abrasion des cuirs d'ameublement. La présente méthode, appelée « essai Taber », est souvent spécifiée par les constructeurs automobiles pour la sellerie automobile.
Usnje – Fizikalno in mehansko preskušanje – Ugotavljanje odpornosti usnja za avtomobile proti drgnjenju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje – Fizikalno in mehansko preskušanje – Ugotavljanje odpornosti usnja za avtomobile proti drgnjenjuLeder - Physikalische und mechanische Prüfungen - Bestimmung des Abriebwiderstandes von Polsterleder in KraftfahrzeugenCuir - Essais physique et mécanique - Détermination de la résistance a l'abrasion du cuir pour l'automobileLeather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN 14327:2003SIST EN 14327:2004en01-maj-2004SIST EN 14327:2004SLOVENSKI
STANDARD
SIST EN 14327:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14327December 2003ICS 59.140.35English versionLeather - Physical and mechanical tests - Determination ofabrasion resistance of automotive leatherCuir - Essais physique et mécanique - Détermination de larésistance à l'abrasion du cuir pour l'automobileLeder - Physikalische und mechanische Prüfungen -Bestimmung des Abriebwiderstandes von Polsterleder inKraftfahrzeugenThis European Standard was approved by CEN on 14 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14327:2003 ESIST EN 14327:2004
EN 14327:2003 (E)2Contents1Scope.42Normative references.43Principle.44Apparatus.45Sampling and sample preparation.56Procedure.56.1Preparation of new wheels.56.2Abrasion of test pieces.56.3Reconditioning of abrasive wheels.67Test report.6Annex A (informative) Sources of apparatus.7SIST EN 14327:2004
EN 14327:2003 (E)3ForewordThis document (EN 14327:2003) has been prepared by Technical Committee CEN /TC 289 "Leather", thesecretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest byJune 2004.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 14327:2004
EN 14327:2003 (E)41 ScopeThis European Standard specifies a method of determining the abrasion resistance of automotive leather.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN ISO 2418, Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO2418:2002).EN ISO 2419, Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002).ISO 105-A02, Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour.3 PrincipleThe test piece is rotated on a vertical axis against the sliding rotation of two abrading wheels which are pressedagainst the test piece with a specified force. One abrading wheel rubs the test piece outwards towards theperiphery, the other inwards to the centre. Any damage to the test piece is noted along with any change of colour.NOTEThis method is also referred to as the “Taber Test”.4 Apparatus4.1Horizontal, motor driven platform, rotating at 60 rpm ± 5 rpm.4.2Removable, flat, circular test piece holder.4.3Pair of pivoted arms, for holding the abrasive wheels with the inner edge of the wheels 26,20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.