SIST EN ISO 17076-1:2012
(Main)Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012)
Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012)
This International Standard specifies a method of determining the abrasion resistance of upholstery leather for different applications using Taber apparatus.
Leder - Bestimmung des Abriebwiderstandes - Teil 1: Taber-Verfahren (ISO 17076-1:2012)
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Abriebwiderstandes von Leder unter
Verwendung des Taber-Prüfgerätes fest.
Cuir - Détermination de la résistance à l'abrasion - Partie 1: Méthode Taber (ISO 17076-1:2012)
L'ISO 17076-1:2012 spécifie une méthode de détermination de la résistance à l'abrasion du cuir au moyen d'un abrasimètre Taber.
Usnje - Ugotavljanje odpornosti proti obrabi - 1. del: Metoda taber (ISO 17076-1:2012)
Ta mednarodni standard določa metodo za ugotavljanje odpornosti usnja za oblazinjenje za različne namene uporabe proti obrabi z napravo taber.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17076-1:2012
01-maj-2012
1DGRPHãþD
SIST EN 14327:2004
Usnje - Ugotavljanje odpornosti proti obrabi - 1. del: Metoda taber (ISO 17076-
1:2012)
Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-
1:2012)
Leder - Bestimmung des Abriebwiderstandes - Teil 1: Taber-Verfahren (ISO 17076-
1:2012)
Cuir - Détermination de la résistance à l'abrasion - Partie 1: Méthode Taber (ISO 17076-
1:2012)
Ta slovenski standard je istoveten z: EN ISO 17076-1:2012
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 17076-1:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17076-1:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 17076-1:2012
EUROPEAN STANDARD
EN ISO 17076-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2012
ICS 59.140.30 Supersedes EN 14327:2003
English Version
Leather - Determination of abrasion resistance - Part 1: Taber
method (ISO 17076-1:2012)
Cuir - Détermination de la résistance à l'abrasion - Partie 1: Leder - Bestimmung des Abriebwiderstandes - Teil 1:
Méthode Taber (ISO 17076-1:2012) Taber-Verfahren (ISO 17076-1:2012)
This European Standard was approved by CEN on 14 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17076-1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17076-1:2012
EN ISO 17076-1:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17076-1:2012
EN ISO 17076-1:2012 (E)
Foreword
This document (EN ISO 17076-1:2012) has been prepared by Technical Committee CEN/TC 289 “Leather",
the secretariat of which is held by UNI, in collaboration with IULTCS "International Union of Leather
Technologists and Chemists Societies".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2012, and conflicting national standards shall be
withdrawn at the latest by September 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14327:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17076-1:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 17076-1:2012
INTERNATIONAL ISO
STANDARD 17076-1
IULTCS/IUP
48-1
First edition
2012-03-15
Leather — Determination of abrasion
resistance —
Part 1:
Taber method
Cuir — Détermination de la résistance à l'abrasion —
Partie 1: Méthode Taber
Reference number
ISO 17076-1:2012(E)
IULTCS/IUP 48-1:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 17076-1:2012
ISO 17076-1:2012(E)
IULTCS/IUP 48-1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17076-1:2012
ISO 17076-1:2012(E)
IULTCS/IUP 48-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17076-1 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 289, Leather, in collaboration with the Physical Test Commission of the International Union of
Leather Technologists and Chemists Societies (IUP Commission, IULTCS), in accordance with the Agreement
on technical co-operation between ISO and CEN (Vienna Agreement).
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the
advancement of leather science and technology. IULTCS has three Commissions, which are responsible for
establishing international methods for sampling and the testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
This first edition of ISO 17076-1 cancels and replaces ISO 17076:2006, which has been technical revised. It
has a modified title and small changes were made in 4.6 and 6.2.2.
ISO 17076 consists of the following parts, under the general title Leather — Determination of abrasion
resistance:
Part 1: Taber method
Part 2: Martindale ball plate method
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17076-1:2012
---------------------- Page: 10 ----------------------
SIST EN ISO 17076-1:2012
ISO 17076-1:2012(E)
INTERNATIONAL STANDARD
IULTCS/IUP 48-1:2012(E)
Leather — Determination of abrasion resistance —
Part 1:
Taber method
1 Scope
This part of ISO 17076 specifies a method of determining the abrasion resistance of leather using a Taber
apparatus.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
referen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.