SIST EN 4639-101:2008

Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard

This standard defines the performance and dimensions of optical physical contact for EN 4641-100 cable specification.

Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Mehrfachkontakt, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 101: Optische Kontakt für EN 4641-100 Kabel - Betriebstemperaturen zwischen - 65 °C und 125 °C - Produktnorm

Diese Norm legt die Leistungsdaten und Maße von optischen physikalischen Kontakten für Kabel nach der Spezifikation EN 4641 100 fest.

Série aérospatiale - Connecteurs optiques rectangulaires, modulaires multicontacts, férule 1,25, équipés d’un porte sleeve démontable - Partie 101 : Contact optique pour câble EN 4641-100 - Températures de fonctionnement comprises entre - 65 °C et 125 °C - Norme de produit

Aeronavtika - Konektorji, optični, pravokotni, modularni, večkontaktni, premer kapice 1,25, s snemljivo centrirno pušo - 101. del: Optični kontakt za kabel EN 4641-100 - Delovne temperature med -65 °C in 125 °C - Standard za proizvod

General Information

• Status: Published
• Publication Date: 14-Jan-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Jan-2008
• Due Date: 14-Mar-2008
• Completion Date: 15-Jan-2008
• Ref Project: EN 4639-101:2007 - Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standardL]YRGSérie aérospatiale - Connecteurs optiques rectangulaires, modulaires multicontacts, férule 1,25, équipés d’un porte sleeve démontable - Partie 101 : Contact optique pour câble EN 4641-100 - Températures de fonctionnement comprises entre - 65 °C et 125 °C - Norme de produitLuft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Mehrfachkontakt, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 101: Optische Kontakt für EN 4641-100 Kabel - Betriebstemperaturen zwischen - 65 °C und 125 °C - ProduktnormTa slovenski standard je istoveten z:EN 4639-101:2007SIST EN 4639-101:2008en49.060ICS:SLOVENSKI
STANDARDSIST EN 4639-101:200801-marec-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4639-101
December 2007 ICS 49.060 English Version
Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard
Série aérospatiale - Connecteurs optiques rectangulaires, modulaires multicontacts, férule 1,25, équipés d'un porte sleeve démontable - Partie 101 : Contact optique pour câble EN 4641-100 - Températures de fonctionnement comprises entre - 65 °C et 125 °C - Norme de produit
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Mehrfachkontakt, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 101: Optische Kontakt für EN 4641-100 Kabel - Betriebstemperaturen zwischen - 65 °C und 125 °C - Produktnorm This European Standard was approved by CEN on 21 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4639-101:2007: E



EN 4639-101:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Fibre optic contact designation and dimensions.4 3.1 Contact designation.4 3.2 Contact dimensions.4 3.3 Cable designation.6 4 Technical specification.6 5 Tests according to EN 2591 series.6 6 Assembly process instructions.7 6.1 Cleaning instructions.7 6.2 Tooling.7 6.3 Termination instructions.7 7 Designation.8



EN 4639-101:2007 (E) 3 Foreword This document (EN 4639-101:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to
...