SIST EN 1396:1998

Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

This European Standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 2,0 mm but thicknesses up to 3,0 mm are also available.  It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip.   It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen

Diese Europäische Norm legt die besonderen Anforderungen für bandbeschichtete Bleche und Bänder aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest, mit einer typischen Dicke bis zu 2,0 mm (Dicken bis 3,0 mm sind lieferbar). Sie gilt für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Bandbeschichtungsverfahren beschichtet, in Endbreite oder nach der Beschichtung längsgeteilt werden, bzw. für Bleche die aus diesen Bändern hergestellt werden.

Aluminium et alliages d'aluminium - Tôles et bandes revetues en bobine pour applications générales - Spécifications

La présente norme européenne spécifie les exigences particulieres relatives aux tôles et bandes en aluminium et alliages d'aluminium corroyés prérevetues en bobine pour applications générales, d'épaisseur typique allant jusqu'a 2,0 mm (des épaisseurs jusqu'a 3,0 mm sont disponibles). Elle s'applique aux bandes en aluminium et alliages d'aluminium laminées a froid, prérevetues en largeur finale par le procédé de revetement en bobine ou refendues apres revetement, ainsi qu'aux tôles obtenues a partir de ces bandes.

Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 31-Mar-2007
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Apr-2007
• Due Date: 01-Apr-2007
• Completion Date: 01-Apr-2007
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 1396:1996 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

Relations

• Replaced By: SIST EN 1396:2007 - Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
• Effective Date: 01-Apr-2007

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - SpezifikationenAluminium et alliages d'aluminium - Tôles et bandes revetues en bobine pour applications générales - SpécificationsAluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1396:1996SIST EN 1396:1998en01-april-1998SIST EN 1396:1998SLOVENSK
...