SIST EN 1396:2023
(Main)Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.
It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip.
It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen
Dieses Dokument legt die besonderen Anforderungen an geschmiedetes Aluminium und Aluminiumknetlegierungen in Form von bandbeschichteten Blechen und Bändern für allgemeine Anwendungen fest. Dieses Produkt wird allgemein in Dicken von bis zu 3,0 mm geliefert.
Es ist anwendbar für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Bandbeschichtungsverfahren mit Flüssigkeit sowie Pulverlacken in der Endbreite beschichtet oder anschließend geschlitzt werden, und für aus solchen Bändern hergestellte Bleche.
Es ist nicht anwendbar für bandbeschichtete Bleche und Bänder für spezielle Anwendungen wie etwa Dosen, Verschlüsse und Deckel, die separat in EN 541 behandelt werden.
Aluminium et alliages d’aluminium - Tôles et bandes revêtues en continu pour applications générales - Spécifications
Le présent document spécifie les exigences particulières relatives aux tôles et bandes en aluminium et alliages d’aluminium corroyés revêtues en continu pour applications générales. Ce produit est généralement fourni en épaisseur allant jusqu’à 3,0 mm.
Ce document s’applique aux bandes en aluminium et alliages d’aluminium laminées à froid revêtues par procédé d’application d’un revêtement continu, avec des peintures liquides ou en poudre, à la largeur finale ou refendues après revêtement, ainsi qu’aux tôles obtenues à partir de ces bandes.
Il ne s’applique pas aux tôles et bandes revêtues en continu utilisées pour des applications particulières, telles que les produits laminés pour cannettes, capsules rigides et couvercles, qui sont traitées séparément dans l’EN 541.
Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije
Ta evropski standard določa posamezne zahteve za gneteni aluminij in zlitine iz gnetenega aluminija v obliki prevlečene ali premazane pločevine in trakov za splošno uporabo. Izdelek je običajno dobavljiv z debelino do 3,0 mm.
Uporablja se za hladno valjani aluminij in trakove iz aluminijeve zlitine, prevlečene s procesom navijanja, pri katerem se uporabljajo tako tekočine kot barve v prahu, in sicer naknadno na končni dolžini ali zarezi, ali za plošče, pridobljene iz takšnih trakov.
Ne uporablja se za prevlečeno ali premazano pločevino in trakove, ki se uporabljajo za posebne namene, na primer za pločevinke, zapirala in pokrove, obravnavane v ločenem standardu EN 541.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1396:2023
01-september-2023
Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za
splošno uporabo - Specifikacije
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications -
Specifications
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für
allgemeine Anwendungen - Spezifikationen
Aluminium et alliages d’aluminium - Tôles et bandes revêtues en continu pour
applications générales - Spécifications
Ta slovenski standard je istoveten z: EN 1396:2023
ICS:
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 1396:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1396:2023
---------------------- Page: 2 ----------------------
SIST EN 1396:2023
EN 1396
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 1396:2015
English Version
Aluminium and aluminium alloys - Coil coated sheet and
strip for general applications - Specifications
Aluminium et alliages d'aluminium - Tôles et bandes Aluminium und Aluminiumlegierungen -
revêtues en continu pour applications générales - Bandbeschichtete Bleche und Bänder für allgemeine
Spécifications Anwendungen - Spezifikationen
This European Standard was approved by CEN on 7 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1396:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1396:2023
EN 1396:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Technical conditions for inspection and delivery . 8
4.1 Ordering information . 8
4.2 Requirements . 10
4.2.1 Production and manufacturing processes . 10
4.2.2 Quality control . 10
4.2.3 Freedom from defects. 11
4.2.4 Chemical composition . 11
4.2.5 Mechanical properties .
...
SLOVENSKI STANDARD
oSIST prEN 1396:2022
01-april-2022
Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za
splošno uporabo - Specifikacije
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications -
Specifications
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für
allgemeine Anwendungen - Spezifikationen
Aluminium et alliages d'aluminium - Tôles et bandes revêtues en continu pour
applications générales - Spécifications
Ta slovenski standard je istoveten z: prEN 1396
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 1396:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1396:2022
---------------------- Page: 2 ----------------------
oSIST prEN 1396:2022
DRAFT
EUROPEAN STANDARD
prEN 1396
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 77.150.10 Will supersede EN 1396:2015
English Version
Aluminium and aluminium alloys - Coil coated sheet and
strip for general applications - Specifications
Aluminium et alliages d'aluminium - Tôles et bandes Aluminium und Aluminiumlegierungen -
revêtues en continu pour applications générales - Bandbeschichtete Bleche und Bänder für allgemeine
Spécifications Anwendungen - Spezifikationen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1396:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1396:2022
prEN 1396:2022 (E)
Contents
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Technical conditions for inspection and delivery . 9
4.1 Ordering information . 9
4.2 Requirements . 11
4.2.1 Production and manufacturing processes . 11
4.2.2 Quality control . 11
4.2.3 Freedom from defects.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.