SIST EN 60384-22:2012
(Main)Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
IEC 60384-22:2011 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification should be of equal or higher performance level, lower performance levels are not permitted. This second edition cancels and replaces the first edition published in 2004 and contains the following significant technical changes with respect to the previous edition. - The measuring frequency of 1 MHz has been reduced to 1 kHz for 100 pF, see 4.5.1 Capacitance. - The test voltage of 1,2 UR at UR greater or equal to 1 000 V has been added in 4.5.4 Voltage proof. - Detail test conditions have been added in 4.7 Shear test and 4.8 Substrate bending test. - Test conditions applying lead free solder alloy (Sn-Ag-Cu) have been included in 4.9 Resistance to soldering heat and 4.10 Solderability. - A selection of the test conditions according to marketing needs has been stated in 4.13 Damp heat, steady state. - The dimensions of 0402 M in Annex A have been added. - The temperature characteristics code of capacitance for the reference temperature of 25 °C has been added, see Annex C.
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2
Condensateurs fixes utilisés dans les équipements électroniques - Partie 22: Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de Classe 2
La CEI 60384-22:2011 est applicable aux condensateurs multicouches fixes non encapsulés à diélectriques en céramique pour montage en surface, Classe 2, utilisés dans les équipements électroniques. Ces condensateurs possèdent des pastilles de connexion métallisées ou des bandes de soudures et sont destinés à être montés sur des cartes imprimées ou directement sur des substrats de circuits hybrides. Les condensateurs d'antiparasitage ne sont pas inclus, mais ils sont couverts par la CEI 60384-14. L'objet de la présente norme est de prescrire des valeurs limites et des caractéristiques préférentielles et de sélectionner à partir de la CEI 60384-1 les procédures d'assurance de la qualité, les essais et les méthodes de mesure appropriées et de donner les exigences de performance générales pour ce type de condensateur. Il convient que les exigences et les sévérités des essais prescrits dans les spécifications particulières se référant à la présente spécification intermédiaire soient d'un niveau de performance supérieur ou égal, des niveaux de performance inférieurs ne sont pas permis. Cette deuxième édition annule et remplace la première édition publiée en 2004 et inclut les modifications techniques significatives suivantes par rapport à l'édition précédente: - La fréquence de 1 MHz a été réduite à 1 kHz pour 100 pF, voir 4.5.1 Capacité. - La tension d'essai de 1,2 UR à UR supérieur ou égal à 1 000 V a été ajoutée en 4.5.4 Tenue en tension. - Les conditions d'essai détaillées ont été mentionnées en 4.7 Essai de cisaillement et 4.8 Essai de courbure du substrat. - Les conditions d'essai s'appliquant à l'alliage de soudure (Sn-Ag-Cu) ont été ajoutées en 4.9 Résistance à la chaleur de brasage et au 4.10 Brasabilité. - Une sélection des conditions d'essai en fonction des besoins du marché a été ajoutée en 4.13 Chaleur humide, essai continu. - Les dimensions de 0402 M ont été ajoutées, voir l'Annexe A. - Le code de caractéristiques de température de capacité pour la température de référence de 25 °C a été ajouté, voir l'Annexe C.
Fiksni kondenzatorji za uporabo v elektronski opremi - 22. del: Področna specifikacija: fiksni večplastni kondenzatorji za površinsko namestitev s keramičnim dielektrikom, razred 2
Ta del standarda IEC 60384 se uporablja za fiksne nezaprte večplastne kondenzatorje za površinsko namestitev s keramičnim dielektrikom razreda 2 za uporabo v elektronski opremi. Ti kondenzatorji imajo metalizirane priključne blazinice ali varilne trakove ter so namenjeni namestitvi na tiskana vezja ali neposredno na podlage za hibridne tokokroge. Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60384-22:2012
01-junij-2012
1DGRPHãþD
SIST EN 60384-22:2005
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO 3RGURþQD
VSHFLILNDFLMD ILNVQLYHþSODVWQLNRQGHQ]DWRUML]DSRYUãLQVNRQDPHVWLWHYV
NHUDPLþQLPGLHOHNWULNRPUD]UHG
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed
surface mount multilayer capacitors of ceramic dielectric, Class 2
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22:
Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren,
Klasse 2
Condensateurs fixes utilisés dans les équipements électroniques - Partie 22:
Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en
céramique pour montage en surface, de Classe 2
Ta slovenski standard je istoveten z: EN 60384-22:2012
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
SIST EN 60384-22:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60384-22:2012
---------------------- Page: 2 ----------------------
SIST EN 60384-22:2012
EUROPEAN STANDARD
EN 60384-22
NORME EUROPÉENNE
March 2012
EUROPÄISCHE NORM
ICS 31.060.10 Supersedes EN 60384-22:2004
English version
Fixed capacitors for use in electronic equipment -
Part 22: Sectional specification -
Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
(IEC 60384-22:2011)
Condensateurs fixes utilisés dans les Festkondensatoren zur Verwendung in
équipements électroniques - Geräten der Elektronik -
Partie 22: Spécification intermédiaire - Teil 22: Rahmenspezifikation -
Condensateurs multicouches fixes à Oberflächenmontierbare
diélectriques en céramique pour montage Vielschichtkeramik-Festkondensatoren,
en surface, de Classe 2 Klasse 2
(CEI 60384-22:2011) (IEC 60384-22:2011)
This European Standard was approved by CENELEC on 2012-01-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-22:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60384-22:2012
EN 60384-22:2012 - 2 -
Foreword
The text of document 40/2128/FDIS, future edition 2 of IEC 60384-22, prepared by IEC TC 40,
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60384-22:2012.
The following dates are fixed:
(dop) 2012-10-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-01-13
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-22:2004.
EN 60384-22:2012 includes the following significant technical changes with respect to
EN 60384-22:2004:
— The measuring frequency of 1 MHz has been reduced to 1 kHz for 100 pF, see 4.5.1 Capacitance.
— The test voltage of 1,2 U at U ≥ 1 000 V has been added in 4.5.4 Voltage proof.
R R
— Detail test conditions have been added in 4.7 Shear test and 4.8 Substrate bending test.
— Test conditions applying lead free solder alloy (Sn-Ag-Cu) have been included in 4.9 Resistance to
soldering heat and 4.10 Solderability.
— A selection of the test conditions according to marketing needs has been stated in 4.13 Damp heat,
steady state.
— The dimensions of 0402 M in Annex A have been added.
— The temperature characteristics code of capacitance for the reference temperature of 25 °C has
been added, see Annex C.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60384-22:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60384-14 NOTE Harmonized as EN 60384-14.
IEC 60384-22-1 NOTE Harmonized as EN 60384-22-1.
---------------------- Page: 4 ----------------------
SIST EN 60384-22:2012
- 3 - EN 60384-22:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60063 1963 Preferred number series for resistors and - -
+ A1 1967 capacitors
+ A2 1977
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
+ corr. October 1988 Part 1: General and guidance
+ A1 1992
IEC 60068-2-58 2004 Environmental testing - EN 60068-2-58 2004
Part 2-58: Tests - Test Td: Test methods for + corr. December 2004
solderability, resistance to dissolution of
metallization and to soldering heat of surface
mounting devices (SMD)
IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
+ corr. November 2008 equipment -
Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems - EN 61193-2 2007
Part 2: Selection and use of sampling plans
for inspection of electronic components and
packages
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
---------------------- Page: 5 ----------------------
SIST EN 60384-22:2012
---------------------- Page: 6 ----------------------
SIST EN 60384-22:2012
IEC 60384-22
®
Edition 2.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 22: Sectional specification – Fixed surface mount multilayer capacitors of
ceramic dielectric, Class 2
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 22: Spécification intermédiaire – Condensateurs multicouches fixes à
diélectriques en céramique pour montage en surface, de Classe 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 31.060.10 ISBN 978-2-88912-821-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 60384-22:2012
– 2 – 60384-22 © IEC:2011
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 8
1.4.1 Outline drawing and dimensions . 9
1.4.2 Mounting . 9
1.4.3 Rating and characteristics . 9
1.4.4 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 10
1.6.1 Information for marking . 11
1.6.2 Marking on the body . 11
1.6.3 Requirements for marking . 11
1.6.4 Marking of the packaging . 11
1.6.5 Additional marking . 11
2 Preferred rating and characteristics . 11
2.1 Preferred characteristics . 11
2.1.1 Preferred climatic categories . 11
2.2 Preferred values of ratings . 12
2.2.1 Rated temperature (T ) . 12
R
2.2.2 Rated voltage (U ) . 12
R
2.2.3 Category voltage (U ) . 12
C
2.2.4 Preferred values of nominal capacitance and associated tolerance
values . 12
2.2.5 Temperature characteristic of capacitance . 13
2.2.6 Dimensions . 14
3 Quality assessment procedures . 14
3.1 Primary stage of manufacture . 14
3.2 Structurally similar components . 14
3.3 Certified records of released lots . 14
3.4 Qualification approval . 14
3.4.1 Qualification approval on the basis of the fixed sample size
procedures . 14
3.4.2 Tests . 15
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 20
3.5.3 Delayed delivery . 20
3.5.4 Assessment levels . 20
4 Test and measurement procedures . 22
4.1 Special preconditioning . 22
4.2 Measuring conditions . 22
4.3 Mounting . 22
4.4 Visual examination and check of dimensions . 22
4.4.1 Visual examination . 22
---------------------- Page: 8 ----------------------
SIST EN 60384-22:2012
60384-22 © IEC:2011 – 3 –
4.4.2 Requirements . 22
4.5 Electrical tests . 24
4.5.1 Capacitance . 24
4.5.2 Tangent of loss angle (tan δ) . 25
4.5.3 Insulation resistance . 25
4.5.4 Voltage proof . 26
4.5.5 Impedance (if required by the detail specification) . 27
4.5.6 Equivalent series resistance [ESR] (if required by the detail
specification) . 27
4.6 Temperature characteristic of capacitance . 27
4.6.1 Special preconditioning . 27
4.6.2 Measuring conditions . 27
4.6.3 Requirements . 28
4.7 Shear test . 28
4.8 Substrate bending test . 28
4.8.1 Initial measurement . 28
4.8.2 Final inspection . 28
4.9 Resistance to soldering heat . 29
4.9.1 Special preconditioning . 29
4.9.2 Initial measurement . 29
4.9.3 Test conditions . 29
4.9.4 Recovery . 30
4.9.5 Final inspection, measurements and requirements . 30
4.10 Solderability . 31
4.10.1 Test conditions . 31
4.10.2 Recovery . 32
4.10.3 Final inspection, measurements and requirements . 32
4.11 Rapid change of temperature . 32
4.11.1 Special preconditioning . 32
4.11.2 Initial measurement . 32
4.11.3 Number of cycles . 32
4.11.4 Recovery . 32
4.11.5 Final inspection, measurements and requirements . 32
4.12 Climatic sequence . 33
4.12.1 Special preconditioning . 33
4.12.2 Initial measurement . 33
4.12.3 Dry heat . 33
4.12.4 Damp heat, cyclic, Test Db, first cycle . 33
4.12.5 Cold . 33
4.12.6 Damp heat, cyclic, Test Db, remaining cycles . 33
4.12.7 Final inspection, measurements and requirements . 34
4.13 Damp heat, steady state . 34
4.13.1 Special preconditioning . 34
4.13.2 Initial measurement . 34
4.13.3 Conditions of test . 34
4.13.4 Recovery . 35
4.13.5 Final inspection, measurements and requirements . 35
4.14 Endurance . 35
4.14.1 Special preconditioning . 35
---------------------- Page: 9 ----------------------
SIST EN 60384-22:2012
– 4 – 60384-22 © IEC:2011
4.14.2 Initial measurement . 36
4.14.3 Conditions of test . 36
4.14.4 Recovery . 36
4.14.5 Final inspection, measurements and requirements . 36
4.15 Robustness of terminations (only for capacitors with strip termination) . 37
4.15.1 Test conditions . 37
4.15.2 Final inspection and requirements . 37
4.16 Component solvent resistance (if required) . 37
4.17 Solvent resistance of the marking (if required) . 37
4.18 Accelerated damp heat, steady state (if required) . 37
4.18.1 Initial measurement . 37
4.18.2 Conditioning . 38
4.18.3 Recovery . 38
4.18.4 Final measurements . 38
Annex A (normative) Guidance for the specification and coding of dimensions of fixed
surface mount multilayer capacitors of ceramic dielectric, Class 2 . 39
Annex B (informative) Capacitance ageing of fixed capacitors of ceramic dielectric,
Class 2 . 40
Annex C (informative) Temperature characteristics of capacitance for the reference
temperature of 25 °C . 42
Bibliography . 43
Figure 1 – Fault: crack or fissure . 23
Figure 2 – Fault: crack or fissure . 23
Figure 3 – Separation or delamination . 23
Figure 4 – Exposed electrodes . 23
Figure 5 – Principal faces . 24
Figure 6 – Reflow temperature profile . 30
Figure A.1 – Dimensions . 39
Table 1 – Preferred values of category voltages . 12
Table 2 – Preferred tolerances . 13
Table 3 – Temperature characteristic of capacitance . 13
Table 4 – Fixed sample size test plan for qualification approval, assessment level EZ . 16
Table 5 – Tests schedule for qualification approval . 17
Table 6a – Lot-by-lot inspection . 21
Table 6b – Periodic test . 21
Table 7 – Measuring conditions . 24
Table 8 – Tangent of loss angle limits . 25
Table 9 – Test voltages. 26
Table 10 – Details of measuring conditions . 27
Table 11 – Reflow temperature profiles for Sn-Ag-Cu alloy . 30
Table 12 – Maximum capacitance change . 31
Table 13 – Maximum capacitance change . 33
Table 14 – Number of damp heat cycles . 33
Table 15 – Final inspection, measurements and requirements . 34
---------------------- Page: 10 ----------------------
SIST EN 60384-22:2012
60384-22 © IEC:2011 – 5 –
Table 16 – Test conditions for damp heat, steady state . 35
Table 17 – Final inspection, measurements and requirements . 35
Table 18 – Endurance test conditions (U = U ) . 36
C R
Table 19 – Endurance test conditions (U ≠ U ) . 36
C R
Table 20 – Final inspection, measurements and requirements of endurance test . 37
Table 21 – Initial requirements . 38
Table 22 – Conditioning . 38
Table A.1 – Dimensions . 39
Table C.1 – Temperature characteristics of capacitance for the reference temperature
of 25 °C . 42
Table C.2 – Measuring conditions of temperature characteristic of capacitance for the
reference temperature of 25 °C . 42
---------------------- Page: 11 ----------------------
SIST EN 60384-22:2012
– 6 – 60384-22 © IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 22: Sectional specification – Fixed surface mount
multilayer capacitors of ceramic dielectric, Class 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-22 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition cancels and replaces the first edition published in 2004 and contains the
following signi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.