EN 60384-22:2012

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

IEC 60384-22:2011 is applicable to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification should be of equal or higher performance level, lower performance levels are not permitted. This second edition cancels and replaces the first edition published in 2004 and contains the following significant technical changes with respect to the previous edition. - The measuring frequency of 1 MHz has been reduced to 1 kHz for 100 pF, see 4.5.1 Capacitance. - The test voltage of 1,2 UR at UR greater or equal to 1 000 V has been added in 4.5.4 Voltage proof. - Detail test conditions have been added in 4.7 Shear test and 4.8 Substrate bending test. - Test conditions applying lead free solder alloy (Sn-Ag-Cu) have been included in 4.9 Resistance to soldering heat and 4.10 Solderability. - A selection of the test conditions according to marketing needs has been stated in 4.13 Damp heat, steady state. - The dimensions of 0402 M in Annex A have been added. - The temperature characteristics code of capacitance for the reference temperature of 25 °C has been added, see Annex C.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2

Condensateurs fixes utilisés dans les équipements électroniques - Partie 22: Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de Classe 2

La CEI 60384-22:2011 est applicable aux condensateurs multicouches fixes non encapsulés à diélectriques en céramique pour montage en surface, Classe 2, utilisés dans les équipements électroniques. Ces condensateurs possèdent des pastilles de connexion métallisées ou des bandes de soudures et sont destinés à être montés sur des cartes imprimées ou directement sur des substrats de circuits hybrides. Les condensateurs d'antiparasitage ne sont pas inclus, mais ils sont couverts par la CEI 60384-14. L'objet de la présente norme est de prescrire des valeurs limites et des caractéristiques préférentielles et de sélectionner à partir de la CEI 60384-1 les procédures d'assurance de la qualité, les essais et les méthodes de mesure appropriées et de donner les exigences de performance générales pour ce type de condensateur. Il convient que les exigences et les sévérités des essais prescrits dans les spécifications particulières se référant à la présente spécification intermédiaire soient d'un niveau de performance supérieur ou égal, des niveaux de performance inférieurs ne sont pas permis. Cette deuxième édition annule et remplace la première édition publiée en 2004 et inclut les modifications techniques significatives suivantes par rapport à l'édition précédente: - La fréquence de 1 MHz a été réduite à 1 kHz pour 100 pF, voir 4.5.1 Capacité. - La tension d'essai de 1,2 UR à UR supérieur ou égal à 1 000 V a été ajoutée en 4.5.4 Tenue en tension. - Les conditions d'essai détaillées ont été mentionnées en 4.7 Essai de cisaillement et 4.8 Essai de courbure du substrat. - Les conditions d'essai s'appliquant à l'alliage de soudure (Sn-Ag-Cu) ont été ajoutées en 4.9 Résistance à la chaleur de brasage et au 4.10 Brasabilité. - Une sélection des conditions d'essai en fonction des besoins du marché a été ajoutée en 4.13 Chaleur humide, essai continu. - Les dimensions de 0402 M ont été ajoutées, voir l'Annexe A. - Le code de caractéristiques de température de capacité pour la température de référence de 25 °C a été ajouté, voir l'Annexe C.

Fiksni kondenzatorji za uporabo v elektronski opremi - 22. del: Področna specifikacija: fiksni večplastni kondenzatorji za površinsko namestitev s keramičnim dielektrikom, razred 2

Ta del standarda IEC 60384 se uporablja za fiksne nezaprte večplastne kondenzatorje za površinsko namestitev s keramičnim dielektrikom razreda 2 za uporabo v elektronski opremi. Ti kondenzatorji imajo metalizirane priključne blazinice ali varilne trakove ter so namenjeni namestitvi na tiskana vezja ali neposredno na podlage za hibridne tokokroge. Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14.

General Information

• Status: Withdrawn
• Publication Date: 29-Mar-2012
• Withdrawal Date: 12-Jan-2015
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 05-Mar-2022
• Completion Date: 05-Mar-2022
• Ref Project: SIST EN 60384-22:2012 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

Relations

• Replaces: EN 60384-22:2004 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60384-22:2019 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
• Effective Date: 04-Jul-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2012
1DGRPHãþD
SIST EN 60384-22:2005
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMDILNVQLYHþSODVWQLNRQGHQ]DWRUML]DSRYUãLQVNRQDPHVWLWHYV
NHUDPLþQLPGLHOHNWULNRPUD]UHG
Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed
surface mount multilayer capacitors of ceramic dielectric, Class 2
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22:
Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren,
Klasse 2
Condensateurs fixes utilisés dans les équipements électroniques - Partie 22:
Spécification intermédiaire - Condensateurs multicouches fixes à diélectriques en
céramique pour montage en surface, de Classe 2
Ta slovenski standard je istoveten z: EN 60384-22:2012
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-22
NORME EUROPÉENNE
March 2012
EUROPÄISCHE NORM
ICS 31.060.10 Supersedes EN 60384-22:2004

English version
Fixed capacitors for use in electronic equipment -
Part 22: Sectional specification -
Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
(IEC 60384-22:2011)
Condensateurs fixes utilisés dans les Festkondensatoren zur Verwendung in
équipements électroniques - Geräten der Elektronik -
Partie 22: Spécification intermédiaire - Teil 22: Rahmenspezifikation -
Condensateurs multicouches fixes à Oberflächenmontierbare
diélectriques en céramique pour montage Vielschichtkeramik-Festkondensatoren,
en surface, de Classe 2 Klasse 2
(CEI 60384-22:2011) (IEC 60384-22:2011)

This European Standard was approved by CENELEC on 2012-01-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-22:2012 E
Foreword
The text of document 40/2128/FDIS, future edition 2 of IEC 60384-22, prepared by IEC TC 40,
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60384-22:2012.

The following dates are fixed:
(dop) 2012-10-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-01-13
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60384-22:2004.
EN 60384-22:2004:
— The measuring frequency of 1 MHz has been reduced to 1 kHz for 100 pF, see 4.5.1 Capacitance.
— The test voltage of 1,2 U at U ≥ 1 000 V has been added in 4.5.4 Voltage proof.
R R
— Detail test conditions have been added in 4.7 Shear test and 4.8 Substrate bending test.
— Test conditions applying lead free solder alloy (Sn-Ag-Cu) have been included in 4.9 Resistance to
soldering heat and 4.10 Solderability.
— A selection of the test conditions according to marketing needs has been stated in 4.13 Damp heat,
steady state.
— The dimensions of 0402 M in Annex A have been added.
— The temperature characteristics code of capacitance for the reference temperature of 25 °C has
been added, see Annex C.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60384-22:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60384-14 NOTE  Harmonized as EN 60384-14.
IEC 60384-22-1 NOTE  Harmonized as EN 60384-22-1.

- 3 - EN 60384-22:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60063 1963 Preferred number series for resistors and - -
+ A1 1967 capacitors
+ A2 1977
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
+ corr. October 1988 Part 1: General and guidance
+ A1 1992
IEC 60068-2-58 2004 Environmental testing - EN 60068-2-58 2004
Part 2-58: Tests - Test Td: Test methods for + corr. December 2004
solderability, resistance to dissolution of
metallization and to soldering heat of surface
mounting devices (SMD)
IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
+ corr. November 2008 equipment -
Part 1: Generic specification
IEC 61193-2 2007 Quality assessment systems - EN 61193-2 2007
Part 2: Selection and use of sampling plans
for inspection of electronic components and
packages
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
IEC 60384-22 ®
Edition 2.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 22: Sectional specification – Fixed surface mount multilayer capacitors of
ceramic dielectric, Class 2
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 22: Spécification intermédiaire – Condensateurs multicouches fixes à
diélectriques en céramique pour montage en surface, de Classe 2

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 31.060.10 ISBN 978-2-88912-821-1

– 2 – 60384-22 © IEC:2011
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 8
1.4.1 Outline drawing and dimensions . 9
1.4.2 Mounting . 9
1.4.3 Rating and characteristics . 9
1.4.4 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 10
1.6.1 Information for marking . 11
1.6.2 Marking on the body . 11
1.6.3 Requirements for marking . 11
1.6.4 Marking of the packaging . 11
1.6.5 Additional marking . 11
2 Preferred rating and characteristics . 11
2.1 Preferred characteristics . 11
2.1.1 Preferred climatic categories . 11
2.2 Preferred values of ratings . 12
2.2.1 Rated temperature (T ) . 12
R
2.2.2 Rated voltage (U ) . 12
R
2.2.3 Category voltage (U ) . 12
C
2.2.4 Preferred values of nominal capacitance and associated tolerance
values . 12
2.2.5 Temperature characteristic of capacitance . 13
2.2.6 Dimensions . 14
3 Quality assessment procedures . 14
3.1 Primary stage of manufacture . 14
3.2 Structurally similar components . 14
3.3 Certified records of released lots . 14
3.4 Qualification approval . 14
3.4.1 Qualification approval on the basis of the fixed sample size
procedures . 14
3.4.2 Tests . 15
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 20
3.5.3 Delayed delivery . 20
3.5.4 Assessment levels . 20
4 Test and measurement procedures . 22
4.1 Special preconditioning . 22
4.2 Measuring conditions . 22
4.3 Mounting . 22
4.4 Visual examination and check of dimensions . 22
4.4.1 Visual examination . 22

60384-22 © IEC:2011 – 3 –
4.4.2 Requirements . 22
4.5 Electrical tests . 24
4.5.1 Capacitance . 24
4.5.2 Tangent of loss angle (tan δ) . 25
4.5.3 Insulation resistance . 25
4.5.4 Voltage proof . 26
4.5.5 Impedance (if required by the detail specification) . 27
4.5.6 Equivalent series resistance [ESR] (if required by the detail
specification) . 27
4.6 Temperature characteristic of capacitance . 27
4.6.1 Special preconditioning . 27
4.6
...