SIST EN ISO 8130-15:2024
(Main)Coating powders - Part 15: Rheology (ISO 8130-15:2023)
Coating powders - Part 15: Rheology (ISO 8130-15:2023)
This document specifies methods for the determination of the rheological behaviour of a coating powder both in particulate and molten form.
Pulverlacke - Teil 15: Rheologie (ISO 8130-15:2023)
Dieses Dokument legt Verfahren zum Bestimmen des rheologischen Verhaltens von partikelförmigem sowie geschmolzenem Pulverlack fest.
Poudres pour revêtement - Partie 15: Rhéologie (ISO 8130-15:2023)
Le présent document spécifie les méthodes permettant de déterminer le comportement rhéologique d’une poudre pour revêtement à la fois sous forme particulaire et sous forme fondue.
Praškasti premazi - 15. del: Reologija (ISO 8130-15:2023)
Ta dokument določa metode za ugotavljanje reoloških lastnosti praškastih premazov v obliki delcev in staljeni obliki.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8130-15:2024
01-januar-2024
Praškasti premazi - 15. del: Reologija (ISO 8130-15:2023)
Coating powders - Part 15: Rheology (ISO 8130-15:2023)
Pulverlacke - Teil 15: Rheologie (ISO 8130-15:2023)
Poudres pour revêtement - Partie 15: Rhéologie (ISO 8130-15:2023)
Ta slovenski standard je istoveten z: EN ISO 8130-15:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 8130-15:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8130-15:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 8130-15:2024
EN ISO 8130-15
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 87.040
English Version
Coating powders - Part 15: Rheology (ISO 8130-15:2023)
Poudres pour revêtement - Partie 15: Rhéologie (ISO Pulverlacke - Teil 15: Rheologie (ISO 8130-15:2023)
8130-15:2023)
This European Standard was approved by CEN on 29 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-15:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8130-15:2024
EN ISO 8130-15:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8130-15:2024
EN ISO 8130-15:2023 (E)
European foreword
The text of ISO 8130-15:2023 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 8130-15:2023 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 8130-15:2023 has been approved by CEN as EN ISO 8130-15:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8130-15:2024
---------------------- Page: 6 ----------------------
SIST EN ISO 8130-15:2024
INTERNATIONAL ISO
STANDARD 8130-15
First edition
2023-01
Coating powders —
Part 15:
Rheology
Poudres pour revêtement —
Partie 15: Rhéologie
Reference number
ISO 8130-15:2023(E)
© ISO 2023
---------------------- Page: 7 ----------------------
SIST EN ISO 8130-15:2024
ISO 8130-15:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2
...
SLOVENSKI STANDARD
oSIST prEN ISO 8130-15:2023
01-julij-2023
Praškasti premazi - 15. del: Reologija (ISO 8130-15:2023)
Coating powders - Part 15: Rheology (ISO 8130-15:2023)
Pulverlacke - Teil 15: Rheologie (ISO 8130-15:2023)
Poudres pour revêtement - Partie 15: Rhéologie (ISO 8130-15:2023)
Ta slovenski standard je istoveten z: prEN ISO 8130-15
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 8130-15:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 8130-15:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8130-15:2023
INTERNATIONAL ISO
STANDARD 8130-15
First edition
2023-01
Coating powders —
Part 15:
Rheology
Poudres pour revêtement —
Partie 15: Rhéologie
Reference number
ISO 8130-15:2023(E)
© ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8130-15:2023
ISO 8130-15:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8130-15:2023
ISO 8130-15:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
4.1 Powder . 1
4.2 Melt . 1
5 Apparatus . 2
6 Sampling . 2
7 Experimental . 2
7.1 Powder measurements . 2
7.1.1 Fluidization measurements . 2
7.1.2 Fluidized bed rheology measurements . 3
7.1.3 Deaeration measurements . 3
7.1.4 Cohesi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.