SIST EN 62005-7:2005

Reliability of fibre optic interconnecting devices and passive optical components -- Part 7: Life stress modeling

Describes a common set of procedures for estimating the reliability of fibre optic connectors, splices, branching devices and other passive components. This part specifically deals with component reliability as estimated from life tests which are accelerated in some manner as in the example of EN 62005-2.

Zuverlässigkeit von LWL-Verbindungselementen und passiven LWL-Bauteilen -- Teil 7: Beanspruchungsmodelle

Fiabilité des dispositifs d'interconnexion et des composants optiques passifs à fibres optiques -- Partie 7: Modélisation de contrainte de durée de vie

Describes a common set of procedures for estimating the reliability of fibre optic connectors, splices, branching devices and other passive components. This part specifically deals with component reliability as estimated from life tests which are accelerated in some manner as in the example of EN 62005-2.

Zanesljivost povezovalnih naprav z optičnimi vlakni in pasivnih optičnih komponent – 7. del: Modeliranje dolgotrajnih preobremenitev (IEC 62005-7:2004)

General Information

• Status: Published
• Publication Date: 31-Jan-2005
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2005
• Due Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Ref Project: EN 62005-7:2004 - Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling

Standards Content (Sample)

SLOVENSKI SIST EN 62005-7:2005

STANDARD
februar 2005
Zanesljivost povezovalnih naprav z optičnimi vlakni in pasivnih optičnih
komponent – 7. del: Modeliranje dolgotrajnih preobremenitev (IEC 62005-
7:2004)
Reliability of fibre optic interconnecting devices and passive optical components -
Part 7: Life stress modeling (IEC 62005-7:2004)
ICS 33.180.20 Referenčna številka
SIST EN 62005-7:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 62005-7
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2004

ICS 33.180.20


English version


Reliability of fibre optic interconnecting devices
and passive optical components
Part 7: Life stress modeling
(IEC 62005-7:2004)


Fiabilité des dispositifs d'interconnexion  Zuverlässigkeit von
et des composants optiques passifs LWL-Verbindungselementen
à fibres optiques und passiven LWL-Bauteilen
Partie 7: Modélisation de contrainte Teil 7: Beanspruchungsmodelle
de durée de vie (IEC 62005-7:2004)
(CEI 62005-7:2004)






This European Standard was approved by CENELEC on 2004-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62005-7:2004 E

---------------------- Page: 2 ----------------------

EN 62005-7:2004 - 2 -
Foreword
The text of document 86B/1896/FDIS, future edition 1 of IEC 62005-7, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62005-7 on 2004-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62005-7:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62005-1 NOTE Harmonized as EN 62005-1:2001 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62005-7:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 62005-2 2001 Reliability of fibre optic interconnecting EN 62005-2 2001
devices and passive components
Part 2: Quantitative assessment of
reliability based on accelerated ageing
tests - Temperature and humidity; steady
state

IEC 62005-3 2001 Part 3: Relevant tests for evaluating EN 62005-3 2001
failure modes and failure mechanisms for
passive components

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



62005-7
INTERNATIONAL


Première édition
STANDARD

First edition

2004-01


Fiabilité des dispositifs d'interconnexion
et des composants optiques passifs
à fibres optiques –
Partie 7:
Modélisation de contrainte de durée de vie

Reliability of fibre optic interconnecting
devices and passive optical components –
Part 7:
Life stress modeling
 IEC 2004 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
G
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

62005-7  IEC:2004 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

RELIABILITY OF FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE OPTICAL COMPONENTS –

Part 7: Life stress modeling


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that so
...