SIST EN 61754-26:2012

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector famlily (IEC 61754-26:2012)

This part of IEC 61754 defines the standard interface dimensions for the type SF optical board connector that uses a normal glass fibre and the physical contact technique to connect flexible optical boards and ribbon fibres.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 26: Steckverbinderfamilie der Bauart SF (IEC 61754-26:2012)

Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 26: Famille de connecteurs de type SF (CEI 61754-26:2012)

La CEI 61754-26:2012 définit les dimensions d'interface normalisées pour les connecteurs de carte optique de type SF qui utilisent une fibre en verre normale et la technique du contact physique pour connecter les cartes optiques et les fibres en ruban. Mots clé: dimensions d'interface pour les connecteurs de carte optique de type SF

Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 26. del: Skupina konektorjev tipa SF (IEC 61754-26:2012)

Ta del standarda IEC 61754 določa standardne dimenzije vmesnika za optični konektor tipa SF, ki za povezavo gibljivih optičnih plošč in trakastih optičnih vlaken uporablja običajna steklena optična vlakna in tehniko fizičnega kontakta.

General Information

• Status: Published
• Publication Date: 25-Oct-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Oct-2012
• Due Date: 21-Dec-2012
• Completion Date: 26-Oct-2012
• Ref Project: EN 61754-26:2012 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector family

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61754-26:2012
01-december-2012
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO6NXSLQDNRQHNWRUMHYWLSD6),(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 26: Type SF connector famlily (IEC 61754-26:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von
Lichtwellenleiter-Steckverbindern - Teil 26: Steckverbinderfamilie der Bauart SF (IEC
61754-26:2012)
Dispositifs d’interconnexion et composants passifs à fibres optiques - Interfaces de
connecteurs pour fibres optiques - Partie 26: Famille de connecteurs de type SF (CEI
61754-26:2012)
Ta slovenski standard je istoveten z: EN 61754-26:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-26:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61754-26:2012

---------------------- Page: 2 ----------------------

SIST EN 61754-26:2012

EUROPEAN STANDARD
EN 61754-26

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 26: Type SF connector family
(IEC 61754-26:2012)


Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Interfaces de connecteurs pour fibres Bauteile - Steckgesichter von
optiques - Lichtwellenleiter-Steckverbindern -
Partie 26: Famille de connecteurs Teil 26: Steckverbinderfamilie
de type SF der Bauart SF
(CEI 61754-26:2012) (IEC 61754-26:2012)



This European Standard was approved by CENELEC on 2012-08-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-26:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61754-26:2012
EN 61754-26:2012 - 2 -
Foreword
The text of document 86B/3433/FDIS, future edition 1 of IEC 61754-26, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-26:2012.
The following dates are fixed:
(dop) 2013-05-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61754-26:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61754-26:2012



IEC 61754-26

®


Edition 1.0 2012-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fibre optic interconnecting devices and passive components – Fibre optic

connector interfaces –

Part 26: Type SF connector family




Dispositifs d’interconnexion et composants passifs à fibres optiques –

Interfaces de connecteurs pour fibres optiques –


Partie 26: Famille de connecteurs de type SF













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX N


ICS 33.180.20 ISBN 978-2-83220-215-9



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 61754-26:2012
– 2 – 61754-26  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Description . 6
3 Interfaces . 6

Figure 1 – SF plug connector interface . 7
Figure 2 – Expanded view of b (plug endface geometry) . 8
Figure 3 – Positions of fibres . 9
Figure 4 – SF socket connector interface . 10
Figure 5 – Expanded view of e (micro holes array geometry) . 11
Figure 6 – Positions of micro holes . 12
Figure 7 – SF adaptor interface . 13
Figure 8 – SF adaptor clip interface . 14

Table 1 – Dimensions of the SF plug connector interface . 7
Table 2 – Dimensions of the SF plug endface . 8
Table 3 – Positions of fibres for SF plug . 9
Table 4 – Dimensions of the SF socket connector interface . 10
Table 5 – Dimensions of the micro holes array . 11
Table 6 – Positions of micro holes for SF socket. 12
Table 7 – Dimensions of the SF adaptor interface . 13
Table 8 – Dimensions of the SF adaptor clip interface . 14

---------------------- Page: 6 ----------------------

SIST EN 61754-26:2012
61754-26  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –

Part 26: Type SF connector family


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC
...