SIST EN 300 162-1 V1.3.1:2003

Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement

To update references. References to Appendix 18 of the Radio Regulations should refer to the Radio Regulations dated 2001 and consequential changes.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Radiotelefonski oddajniki in sprejemniki za pomorske mobilne storitve, ki delujejo v pasovih VHF – 1. del: Tehnične karakteristike in merilne metode

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 162-1 V1.3.1 (2003-12) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Part 1: Technical characteristics and methods of measurement47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 162-1 Version 1.3.1SIST EN 300 162-1 V1.3.1:2003en01-december-2003SIST EN 300 162-1 V1.3.1:2003SLOVENSKI
STANDARD



SIST EN 300 162-1 V1.3.1:2003



ETSI EN 300 162-1 V1.3.1 (2003-12)European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Radiotelephone transmitters and receivers for themaritime mobile service operating in VHF bands;Part 1: Technical characteristicsand methods of measurement
SIST EN 300 162-1 V1.3.1:2003



ETSI ETSI EN 300 162-1 V1.3.1 (2003-12) 2
Reference REN/ERM-TG26-061-1 Keywords EMC, GMDSS, maritime, radio, telephony, testing, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 162-1 V1.3.1:2003



ETSI ETSI EN 300 162-1 V1.3.1 (2003-12) 3
Contents Intellectual Property Rights.8 Foreword.8 1 Scope.9 2 References.9 3 Definitions, symbols and abbreviations.10 3.1 Definitions.10 3.2 Symbols.10 3.3 Abbreviations.10 4 General and operational requirements.10 4.1 Construction.10 4.2 Controls and indicators.11 4.3 Handset and loudspeaker.12 4.4 Safety precautions.12 4.5 Labelling.12 4.6 Warm up.12 5 Technical requirements.13 5.1 Switching time.13 5.2 Class of emission and modulation characteristics.13 5.3 Multiple watch facilities.13 5.3.1 Additional performance standards.13 5.3.2 Scanning characteristics.14 5.4 DSC controller interfaces.14 5.4.1 Operational interfaces.14 6 General conditions of measurement.14 6.1 Arrangements for test signals applied to the receiver input.14 6.2 Squelch.14 6.3 Normal test modulation.14 6.4 Artificial antenna.15 6.5 Arrangements for test signals applied to the transmitter input.15 6.6 Test channels.15 6.7 Measurement uncertainty and interpretation of the measured results.15 6.7.1 Measurement uncertainty.15 6.7.2 Interpretation of the measurement results.16 6.8 Test conditions, power sources and ambient temperatures.16 6.8.1 Normal and extreme test conditions.16 6.8.2 Test power source.16 6.9 Normal test conditions.16 6.9.1 Normal temperature and humidity.16 6.9.2 Normal power sources.16 6.9.2.1 Mains voltage and frequency.16 6.9.2.2 Battery power source.17 6.9.2.3 Other power sources.17 6.10 Extreme test conditions.17 6.10.1 Extreme temperatures.17 6.10.2 Extreme values of test power sources.17 6.10.2.1 Mains voltage.17 6.10.2.2 Battery power source.17 6.10.2.3 Other power sources.17 6.11 Procedure for tests at extreme temperatures.17 7 Environmental tests.18 7.1 Procedure.18 7.2 Performance check.18 SIST EN 300 162-1 V1.3.1:2003



ETSI ETSI EN 300 162-1 V1.3.1 (2003-12) 4
7.3 Vibration test.18 7.3.1 Definition.18 7.3.2 Method of measurement.18 7.3.3 Requirement.19 7.4 Temperature tests.19 7.4.1 Definition.19 7.4.2 Dry heat.19 7.4.2.1 Definition.19 7.4.2.2 Method of measurement.19 7.4.2.3 Requirement.19 7.4.3 Damp heat.19 7.4.3.1 Definition.19 7.4.3.2 Method of measurement.20 7.4.3.3 Requirement.20 7.4.4 Low temperature cycle.20 7.4.4.1 Definition.20 7.4.4.2 Method of measurement.20 7.4.4.3 Requirement.20 8 Transmitter.20 8.1 Frequency error.20 8.1.1 Definition.20 8.1.2 Method of measurement.21 8.1.3 Limits.21 8.2 Carrier power.21 8.2.1 Definitions.21 8.2.2 Method of measurement.21 8.2.3 Limits.21 8.2.3.1 Normal test conditions.21 8.2.3.2 Extreme test conditions.21 8.3 Frequency deviation.21 8.3.1 Definition.21 8.3.2 Maximum permissible frequency deviation.22 8.3.2.1 Method of measurement.22 8.3.2.2 Limits.22 8.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz.22 8.3.3.1 Method of measurement.22 8.3.3.2 Limits.22 8.4 Sensitivity of the modulator, including microphone.23 8.4.1 Definition.23 8.4.2 Method of measurement.23 8.4.3 Limits.23 8.5 Audio frequency response.23 8.5.1 Definition.23 8.5.2 Method of measurement.23 8.5.3 Limit.23 8.6 Audio frequency harmonic distortion of the emission.24 8.6.1 Definition.24 8.6.2 Method of measurement.24 8.6.2.1 Normal test conditions.24 8.6.2.2 Extreme test conditions.24 8.6.3 Limits.24 8.7 Adjacent channel power.25 8.7.1 Definition.25 8.7.2 Method of measurement.25 8.7.3 Limits.25 8.8 Conducted spurious emissions conveyed to the antenna.25 8.8.1 Definition.25 8.8.2 Method of measurement.26 8.8.3 Limit.26 8.9 Cabinet radiation and conducted spurious emissions other than those conveyed to the antenna.26 8.9.1 Definitions.26 SIST EN 300 162-1 V1.3.1:2003



ETSI ETSI EN 300 162-1 V1.3.1 (2003-12) 5
8.9.2 Method of measurement.26 8.9.3 Limits.27 8.10 Residual modulation of the transmitter.27 8.10.1 Definition.27 8.10.2 Method of measurement.27 8.10.3 Limit.27 8.11 DSC audio input characteristics.27 8.11.1 Definition.27 8.11.2 Method of measurement.28 8.11.3 Limits.28 8.12 DSC audio input limitation.28 8.12.1 Definition.28 8.12.2 Method of measurement.28 8.12.3 Limit.28 8.13 Modulation attack time.28 8.13.1 Definition.28 8.13.2 Method of measurement.28 8.13.3 Limit.29 8.14 Transient frequency behaviour of the transmitter.30 8.14.1 Definitions.30 8.14.2 Method of measurement.30 8.14.3 Limits.33 9 Receiver.33 9.1 Harmonic distortion and rated audio frequency output power.33 9.1.1 Definition.33 9.1.2 Methods of measurement.33 9.1.3 Limits.34 9.2 Audio frequency response.34 9.2.1 Definition.34 9.2.2 Method of measurement.34 9.2.3 Limits.35 9.3 Maximum usable sensitivity.35 9.3.1 Definition.35 9.3.2 Method of measurement.35 9.3.3 Limits.36 9.4 Co-channel rejection.36 9.4.1 Definition.36 9.4.2 Method of measurement.36 9.4.3 Limit.36 9.5 Adjacent channel selectivity.36 9.5.1 Definition.36 9.5.2 Method of measurement.37 9.5.3 Limits.37 9.6 Spurious response rejection.37 9.6.1 Definition.37 9.6.2 Method of measurement.37 9.6.3 Limit.37 9.7 Intermodulation response.38 9.7.1 Definition.38 9.7.2 Method of measurement.38 9.7.3 Limit.38 9.8 Blocking or desensitization.38 9.8.1 Definition.38 9.8.2 Method of measurement.38 9.8.3 Limit.39 9.9 Conducted spurious emissions.
...