SIST EN 300 225 V1.4.1:2006

Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus

The present document states the minimum technical characteristics required for portable VHF radiotelephones operating in the bands between 156 MHz and 174 MHz allocated to the Maritime Mobile Services by the Radio Regulations (see Radio Regulations, Appendices 18 [1] and 19 [2]) and suitable for use in survival craft and, optionally, on board ships at sea. The requirements detailed in the Radio Regulations, International Convention for the Safety Of Life At Sea SOLAS 1974 and the International Maritime Organization Resolutions A.694(17) [4] and A.809(19) [3] are incorporated in the present document.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Tehnične karakteristike in merilne metode za prenosne radiotelefonske aparate VHF za rešilne čolne

General Information

• Status: Published
• Publication Date: 28-Feb-2006
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2006
• Due Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Ref Project: ETSI EN 300 225 V1.4.1 (2004-12) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for survival craft portable VHF radiotelephone apparatus

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 225 V1.4.1:2006
01-marec-2006
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]DSUHQRVQHUDGLRWHOHIRQVNHDSDUDWH
9+)]DUHãLOQHþROQH
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical
characteristics and methods of measurement for survival craft portable VHF
radiotelephone apparatus
Ta slovenski standard je istoveten z: EN 300 225 Version 1.4.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 300 225 V1.4.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 225 V1.4.1:2006

---------------------- Page: 2 ----------------------

SIST EN 300 225 V1.4.1:2006

ETSI EN 300 225 V1.4.1 (2004-12)
European Standard (Telecommunications series)


Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Technical characteristics and methods of
measurement for survival craft portable VHF
radiotelephone apparatus

---------------------- Page: 3 ----------------------

SIST EN 300 225 V1.4.1:2006
 2 ETSI EN 300 225 V1.4.1 (2004-12)



Reference
REN/ERM-TG26-064
Keywords
maritime, radio, GMDSS, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2004.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 225 V1.4.1:2006
 3 ETSI EN 300 225 V1.4.1 (2004-12)
Contents
Intellectual Property Rights.7
Foreword.7
1 Scope.8
2 References.8
3 Abbreviations.8
4 General requirements.9
4.1 Construction.9
4.2 Frequencies and power.9
4.3 Controls.10
4.4 Switching time.10
4.5 Safety precautions.10
4.6 Class of emission and modulation characteristics .10
4.7 Battery.11
4.8 Labelling.11
5 Test conditions, power sources and ambient temperatures .11
5.1 Normal and extreme test conditions .11
5.2 Test power source.11
5.3 Normal test conditions.12
5.3.1 Normal temperature and humidity.12
5.3.2 Normal power source.12
5.4 Extreme test conditions .12
5.4.1 Extreme temperatures.12
5.4.1.1 Upper extreme temperature.12
5.4.1.2 Lower extreme temperature .12
5.4.2 Extreme test power supply values.12
5.4.2.1 Upper extreme test voltage.12
5.4.2.2 Lower extreme test voltage .12
5.5 Procedure for tests at extreme temperatures.13
6 General conditions of measurement.13
6.1 Test connections.13
6.2 Arrangements for test signals applied to the receiver input.13
6.3 Receiver mute or squelch facility.13
6.4 Normal test modulation.13
6.5 Artificial antenna.13
6.6 Test channels.14
6.7 Measurement uncertainty and interpretation of the measuring results .14
6.7.1 Measurement uncertainty.14
6.7.2 Interpretation of the measurement results.14
7 Environmental tests.15
7.1 Introduction.15
7.2 Procedure.15
7.3 Performance check.15
7.4 Drop test on hard surface.15
7.4.1 Definition.15
7.4.2 Method of measurement.15
7.4.3 Requirement.16
7.5 Vibration test.16
7.5.1 Method of measurement.16
7.5.2 Requirement.16
7.6 Temperature tests.16
7.6.1 General.16
7.6.2 Dry heat cycle .16
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 225 V1.4.1:2006
 4 ETSI EN 300 225 V1.4.1 (2004-12)
7.6.2.1 Method of measurement.16
7.6.2.2 Requirement.17
7.6.3 Damp heat cycle .17
7.6.3.1 Method of measurement.17
7.6.3.2 Requirement.17
7.6.4 Low temperature cycle.17
7.6.4.1 Method of measurement.17
7.6.4.2 Requirement.17
7.7 Corrosion test (sea water test) .18
7.7.1 General.18
7.7.2 Method of measurement.18
7.7.3 Requirements.18
7.8 Immersion test.19
7.8.1 Method of measurement.19
7.8.2 Requirements.19
7.9 Thermal shock.19
7.9.1 Method of measurement.19
7.9.2 Requirements.19
7.10 Solar radiation.19
7.10.1 Method of measurement.19
7.10.2 Requirements.19
7.11 Oil resistance test.20
7.11.1 Method of measurement.20
7.11.2 Requirement.20
8 Field measurement.20
8.1 General.20
8.2 Transmitter Effective Radiated Power (ERP).20
8.2.1 Definition.20
8.2.2 Method of measurement.20
8.2.3 Limit.21
8.3 Spurious emissions from the transmitter .21
8.3.1 Definition.21
8.3.2 Method of measurement.21
8.3.3 Limit.21
8.4 Spurious emissions from the receiver.22
8.4.1 Definition.22
8.4.2 Method of measurement.22
8.4.3 Limit.22
9 Transmitter.22
9.1 General.22
9.2 Frequency error.22
9.2.1 Definition.22
9.2.2 Method of measurement.22
9.2.3 Limit.22
9.3 Carrier power referenced to ERP .23
9.3.1 Definition.23
9.3.2 Method of measurement.23
9.3.3 Limits.23
9.4 Frequency deviation.23
9.4.1 Definition.23
9.4.2 Maximum permissible frequency deviation.23
9.4.2.1 Method of measurement.23
9.4.2.2 Limit.23
9.4.3 Reduction of frequency deviation at modulation frequencies above 3 kHz.24
9.4.3.1 Method of measurement.24
9.4.3.2 Limits.24
9.5 Limitation characteristics of the modulator.24
9.5.1 Definition.24
9.5.2 Method of measurement.24
9.5.3 Limits.25
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 225 V1.4.1:2006
 5 ETSI EN 300 225 V1.4.1 (2004-12)
9.6 Sensitivity of the modulator, including microphone .25
9.6.1 Definition.25
9.6.2 Method of measurement.25
9.6.3 Limit.25
9.7 Audio frequency response .25
9.7.1 Definition.25
9.7.2 Method of measurement.25
9.7.3 Limit.25
9.8 Audio frequency harmonic distortion of the emission.25
9.8.1 Definition.25
9.8.2 Method of measurement.25
9.8.2.1 Normal test conditions .26
9.8.2.2 Extreme test conditions .26
9.8.3 Limit.26
9.9 Adjacent channel power .26
9.9.1 Definition.26
9.9.2 Method of measurement.26
9.9.3 Limits.26
9.10 Residual modulation of the transmitter .27
9.10.1 Definition.27
9.10.2 Method of measurement.27
9.10.3 Limit.27
9.11 Transient frequency behaviour of the transmitter.27
9.11.1 Definitions.27
9.11.2 Method of measurement.28
9.11.3 Limits.29
10 Receiver.31
10.1 Harmonic distortion and rated audio frequency output power .31
10.1.1 Definition.31
10.1.2 Methods of measurement.31
10.1.3 Limits.31
10.2 Audio frequency response .31
10.2.1 Definition.31
10.2.2 Method of measurement.31
10.2.3 Limits.32
10.3 Maximum usable sensitivity.32
10.3.1 Definition.32
10.3.2 Method of measurement.32
10.3.3 Limits.32
10.4 Co-channel rejection.32
10.4.1 Definition.32
10.4.2 Method of measurement.33
10.4.3 Limit.33
10.5 Adjacent channel selectivity.33
10.5.1 Definition.33
10.5.2 Method of measurement.33
10.5.3 Limits.33
10.6 Spurious response rejection.33
10.6.1 Definition.33
10.6.2 Method of measurement.34
10.6.3 Limit.34
10.7 Intermodulation response.
...