SIST EN IEC 62149-3:2023
(Main)Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC 62149-3:2023)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC 62149-3:2023)
This part of IEC 62149 covers the performance specification for electroabsorption (EA) type
optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic
transmission systems. This document contains definitions for product performance
requirements as well as a series of tests and measurements, for which clearly defined
conditions, severities and pass/fail criteria are provided. The tests are intended to be run as an
initial design verification to prove any product's ability to satisfy this document's requirements.
This document is applicable for on-off keying modulation formats.
A product that has been shown to meet all the requirements of a performance standard can be
declared as compliant with the performance standard but will then be controlled by a quality
assurance program.
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme (IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission fibroniques 40 Gbit/s (IEC 62149-3:2023)
IEC 62149-3: 2023 couvre les spécifications de performance concernant les modulateurs optiques à électroabsorption (EA) avec diodes laser intégrées de façon monolithique, destinés à des systèmes de transmission fibroniques 40 Gbit/s. Le présent document contient des définitions des exigences de performances de produits, ainsi qu’une série d’essais et de mesures, avec des conditions, des sévérités et des critères d’acceptation/de rejet clairement définis. Les essais sont destinés à être réalisés à titre de vérification initiale de conception, pour prouver la capacité d’un quelconque produit à satisfaire aux exigences du présent document. Le présent document s’applique aux formats de modulation tout ou rien. Un produit qui a montré qu’il satisfaisait à toutes les exigences d’une norme de performance peut être déclaré comme conforme à la norme de performance, mais il est ensuite contrôlé selon un programme d’assurance de la qualité. Cette quatrième édition annule et remplace la troisième édition parue en 2020. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) spécification de la force de traction pour l’essai de traction sur fibre dans le Tableau 6 selon le type de fibre;
b) modification du symbole pour la puissance rayonnée sans non-linéarité dans le Tableau 4 et dans le Tableau 5;
c) remplacement des symboles non définis dans le Tableau 7;
d) ajout de l’IEC 62149-1 comme référence normative.
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40 Gbit/s (IEC 62149-3:2023)
Ta del standarda IEC 62149 zajema specifikacijo delovanja za elektroabsorpcijske (EA) optične modulatorje z monolitno integriranimi laserskimi diodami za 40-Gbit/s sisteme za prenos optičnih vlaken. Ta dokument vsebuje opredelitve zahtev glede učinkovitosti izdelka ter vrsto preskusov in meritev, za katere so jasno opredeljeni pogoji, zahtevnost in merila za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni preverjanju začetnega projektiranja, s katerim se dokaže, ali lahko izdelek izpolnjuje zahteve tega dokumenta.
Ta dokument se uporablja za vklopno-izklopne formate modulacije.
Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar ga bo v tem primeru nadzoroval program za zagotavljanje skladnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62149-3:2023
01-oktober-2023
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski
diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40
Gbit/s (IEC 62149-3:2023)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC
62149-3:2023)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s (IEC 62149-3:2023)
Ta slovenski standard je istoveten z: EN IEC 62149-3:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62149-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62149-3:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62149-3:2023
EUROPEAN STANDARD EN IEC 62149-3
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.20 Supersedes EN IEC 62149-3:2020;
EN IEC 62149-3:2020/AC:2021-03
English Version
Fibre optic active components and devices - Performance
standards - Part 3: Modulator-integrated laser diode transmitters
for 40-Gbit/s fibre optic transmission systems
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 3: Émetteurs à diodes laser à Betriebsverhaltensnormen - Teil 3: Modulator-integrierte
modulateur intégré pour systèmes de transmission Laserdioden-Sender für 40 Gbit/s-Lichtwellenleiter-
fibroniques 40 Gbit/s Übertragungssysteme
(IEC 62149-3:2023) (IEC 62149-3:2023)
This European Standard was approved by CENELEC on 2023-08-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-3:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62149-3:2023
EN IEC 62149-3:2023 (E)
European foreword
The text of document 86C/1839/CDV, future edition 4 of IEC 62149-3, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-23
document have to be withdrawn
This document supersedes EN IEC 62149-3:2020 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62149-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following
...
SLOVENSKI STANDARD
oSIST prEN IEC 62149-3:2023
01-marec-2023
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 3. del:
Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne
sisteme 40 Gbit/s
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s
Ta slovenski standard je istoveten z: prEN IEC 62149-3:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 62149-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62149-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62149-3:2023
86C/1839/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62149-3 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-06 2023-03-31
SUPERSEDES DOCUMENTS:
86C/1799/CD, 86C/1818A/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated
laser diode transmitters for 40-Gbit/s fibre optic transmission systems
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You
may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission
in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62149-3:2023
IEC CDV 62149-3/Ed4 © IEC 2023 – 2 – 86C/1839/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms, definitions and abbreviated terms . 7
8 3.1 Terms and definitions . 7
9 3.2 Abbreviated terms . 7
10 4 Product parameters . 7
11 4.1 Absolute limiting ratings . 7
12 4.2 Operating environment . 8
13 4.3 Functional specification. 8
14 4.4 Diagrams . 9
15 5 Testing . 10
16 5.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.