SIST EN 3733-003:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard

This standard specifies the characteristics of plug connectors in the family of circular single channel fibre optic connectors incorporating ferrules for aerospace series single core optical cable in accordance with EN 4532.
Connector interface dimensions, table of tests and qualification approval requirements, are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.

Luft- und Raumfahrt - Optischer Rundsteckverbinder einpolig, Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 003: Loser Steckverbinder für Kabel nach EN 4532, Produktnorm

Diese Norm legt die Eigenschaften von freien Steckverbindern in der Familie der einpoligen LWL Rundsteckverbinder für einadrige optische Kabel nach EN 4532 zur Anwen¬dung in der Luft  und Raumfahrt fest.
Die Maße des Steckgesichts, eine Tabelle mit Prüfungen sowie Anforderungen für die Bauartzulassung sind in den Technischen Lieferbedingungen EN 3733 001 enthalten. EN 3733 002, Übersicht über die Produkt¬normen, enthält ein Verzeichnis der Bauarten der Erzeugnisse, die Kodierung und anwendbare Kombina¬tionen der Erzeugnisbauarten.

Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 003: Fiche connecteur pour câble EN 4532 - Norme de produit

Aeronavtika - Konektor, optični, okrogli, enokanalni, priključen s samozaklepnim obročem, s stalno delovno temperaturo do 150 °C - 003. del: Vtični konektor za kabel v skladu z EN 4532 - Standard za proizvod

General Information

• Status: Published
• Publication Date: 18-May-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Apr-2008
• Due Date: 19-Jun-2008
• Completion Date: 19-May-2008
• Ref Project: EN 3733-003:2008 - Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standardSérie aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 003: Fiche connecteur pour câble EN 4532 - Norme de produitLuft- und Raumfahrt - Optischer Rundsteckverbinder einpolig, Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 003: Loser Steckverbinder für Kabel nach EN 4532, Produktnorm49.060Aerospace electric equipment and systemsICS:SIST EN 3733-003:2008enTa slovenski standard je istoveten z:EN 3733-003:200801-julij-2008SIST EN 3733-003:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3733-003
April 2008 ICS 49.060 English Version
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard
Série aérospatiale - Connecteur optique circulaire monovoie, à accouplement par bague filetée, température d'utilisation 150 °C continu - Partie 003: Fiche connecteur pour câble EN 4532 - Norme de produit
Luft- und Raumfahrt - Optischer Rundsteckverbinder einpolig, Schraubkupplung, Betriebstemperatur 150 °C konstant - Teil 003: Loser Steckverbinder für Kabel nach EN 4532, Produktnorm This European Standard was approved by CEN on 16 September 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3733-003:2008: E



EN 3733-003:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terminology.5 4 Required characteristics.5 4.1 Dimensions and mass.5 4.2 Materials.5 4.3 Main general characteristics.5 4.4 Possible combinations of plugs and receptacles.5 5 Designation.6 6 Marking.6 7 Technical specification.6
Figures Figure 1.5
Tables Table 1 — Compatible connectors and spare parts.6 Table 2 — Additional test requirements applicable to this product standard.7



EN 3733-003:2008 (E) 3 Foreword This document (EN 3733-003:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3733-003:2008 (E) 4 1 Scope This standard specifies the characteristics of plug connectors in the family of circular single channel fibre optic connectors incorporating ferrules for aerospace series single core optical cable in accordance with EN 4532. Connector interface dimensions, table of tests and qualification approval requirements, are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types. 2 Normative references The following referenced docum
...