Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 1: Concepts and principles (ISO 19650-1:2018)

This document is part one of an International Standard for information management using building information Modelling – ISO 19650. It sets out the concepts and principles for successful information management at a level of maturity described as “BIM according to ISO 19650”.
This standard applies to the whole life cycle of a built asset, including initial design and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.
The concepts and principles contained in this part of the Standard are aimed at all those involved in the asset life cycle. This includes, but is not limited to, the owner, the operator, the asset manager, the designer team, the construction supply chain, equipment manufacturers, system specialists, policy makers and regulators.
The concepts, principles and requirements within all parts of this Standard may be augmented or explained in more detail in a National Foreword prepared by each national standards body.
It is proposed that this International standard is developed in parallel with CEN

Organisation von Daten zu Bauwerken - Informationsmanagement mit BIM - Teil 1: Konzepte und Grundsätze (ISO 19650-1:2018)

Dieses Dokument beschreibt die Begriffe und Grundsätze für das Informationsmanagement in einem Reifegrad, der als „Bauwerksinformationsmodellierung (BIM) nach der Normenreihe ISO 19650“ bezeichnet wird.
Dieses Dokument enthält Empfehlungen für eine Vorgabe zur Verwaltung von Informationen, einschließlich Austausch, Aufzeichnung, Versionierung und Organisation für alle Akteure.
Dieses Dokument gilt für den gesamten Lebenszyklus aller baulichen Assets, einschließlich strategischer Planung, erster Planungsschritte, Ingenieurleistungen, Entwicklung, Dokumentation und Konstruktion, täglichem Betrieb, Wartung, Sanierung, Reparatur und Rückbau.
Dieses Dokument kann auf Assets und Projekte jeden Umfangs und jeder Komplexität angepasst werden, um die Flexibilität und Vielseitigkeit, die die große Bandbreite der möglichen Beschaffungsstrategien kennzeichnen, nicht zu beeinträchtigen und um die Kosten für die Umsetzung dieses Dokuments zu berücksichtigen.

Organisation et numérisation des informations relatives aux bâtiments et ouvrages de génie civil, y compris modélisation des informations de la construction (BIM) - Gestion de l'information par la modélisation des informations de la construction - Partie 1: Concepts et principes (ISO 19650-1:2018)

Le présent document expose les concepts et principes de gestion de l'information à un stade de maturité décrit comme la «modélisation des informations de la construction (BIM) selon la série ISO 19650».
Ce document fournit des recommandations pour définir un cadre de gestion de l'information incluant l'échange, l'enregistrement, le contrôle de version et l'organisation, à destination de tous les acteurs.
Il s'applique à la totalité du cycle de vie de tout actif bâti, y compris la planification stratégique, la conception initiale, l'ingénierie, le développement, la documentation et la construction, l'exploitation quotidienne, la maintenance, la réhabilitation, la réparation et la fin de vie.
Le présent document peut être adapté aux actifs ou aux projets d'échelle et de complexité diverses, afin de ne pas entraver la flexibilité et la versatilité qui caractérisent la large plage de types de marché potentiels et afin de répondre au coût de mise en œuvre du présent document.

Organizacija in digitalizacija informacij v gradbeništvu - Upravljanje informacij z BIM - 1. del: Pojmi in načela (ISO 19650-1:2018)

Ta dokument je prvi del mednarodnega standarda za upravljanje informacij z BIM – ISO 19650. Določa pojme in načela za uspešno upravljanje informacij na ravni zrelosti, opisano kot »BIM v skladu s standardom ISO 19650«. Ta standard se uporablja za celoten življenjski cikel zgrajenega sredstva, vključno z začetnim projektiranjem in gradnjo, vsakodnevnim delovanjem, vzdrževanjem, obnovo, popravilom in koncem življenjskega cikla. Pojmi in načela, ki jih vsebuje ta del standarda, so namenjeni vsem vpletenim v življenjski cikel sredstva. To med drugim vključuje lastnika, upravljavca, vodjo sredstev, skupino za projektiranje, dobavno verigo pri gradnji, proizvajalce opreme, strokovnjake za sisteme, oblikovalce politik in regulatorje. Pojmi, načela in zahteve iz vseh delov tega standarda so lahko bolj podrobno pojasnjeni v nacionalnem predgovoru, ki ga pripravi vsak nacionalni organ za standarde. Ta mednarodni standard naj se razvija vzporedno s CEN.

General Information

Status
Published
Public Enquiry End Date
14-Mar-2018
Publication Date
05-Feb-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2019
Due Date
10-Mar-2019
Completion Date
06-Feb-2019

Buy Standard

Standard
EN ISO 19650-1:2019 - BARVE
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19650-1:2017 - BARVE
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19650-1:2018 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19650-1:2019
01-marec-2019
2UJDQL]DFLMDLQGLJLWDOL]DFLMDLQIRUPDFLMYJUDGEHQLãWYX8SUDYOMDQMHLQIRUPDFLM]
%,0GHO3RMPLLQQDþHOD ,62
2UJDQL]DWLRQDQGGLJLWL]DWLRQRILQIRUPDWLRQDERXWEXLOGLQJVDQGFLYLOHQJLQHHULQJZRUNV
LQFOXGLQJEXLOGLQJLQIRUPDWLRQPRGHOOLQJ %,0 ,QIRUPDWLRQPDQDJHPHQW
XVLQJEXLOGLQJLQIRUPDWLRQPRGHOOLQJ3DUW&RQFHSWVDQGSULQFLSOHV ,62

Organisation von Daten zu Bauwerken - Informationsmanagement mit BIM - Teil 1:
Konzepte und Grundsätze (ISO 19650-1:2018)
Organisation et numérisation des informations relatives aux bâtiments et ouvrages de
génie civil, y compris modélisation des informations de la construction (BIM) - Gestion de
l'information par la modélisation des informations de la construction - Partie 1: Concepts
et principes (ISO 19650-1:2018)
Ta slovenski standard je istoveten z: EN ISO 19650-1:2018
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
SIST EN ISO 19650-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19650-1:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 19650-1:2019


EN ISO 19650-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 35.240.67; 91.010.01
English Version

Organization and digitization of information about
buildings and civil engineering works, including building
information modelling (BIM) - nformation management
using building information modelling - 1Part 1: Concepts
and principles (ISO 19650-1:2018)
Organisation et numérisation des informations Organisation von Daten zu Bauwerken -
relatives aux bâtiments et ouvrages de génie civil, y Informationsmanagement mit BIM - Teil 1: Konzepte
compris modélisation des informations de la und Grundsätze (ISO 19650-1:2018)
construction (BIM) - 1Gestion de l'information par la
modélisation des informations de la construction -
Partie 1: Concepts et principes (ISO 19650-1:2018)
This European Standard was approved by CEN on 24 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19650-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19650-1:2019
EN ISO 19650-1:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 19650-1:2019
EN ISO 19650-1:2018 (E)
European foreword
This document (EN ISO 19650-1:2018) has been prepared by Technical Committee ISO/TC 59
"Buildings and civil engineering works" in collaboration with Technical Committee CEN/TC 442
“Building Information Modelling (BIM)” the secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19650-1:2018 has been approved by CEN as EN ISO 19650-1:2018 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 19650-1:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 19650-1:2019
INTERNATIONAL ISO
STANDARD 19650-1
First edition
2018-12
Organization and digitization of
information about buildings and civil
engineering works, including building
information modelling (BIM) —
Information management using
building information modelling —
Part 1:
Concepts and principles
Organisation et numérisation des informations relatives aux
bâtiments et ouvrages de génie civil, y compris modélisation des
informations de la construction (BIM) — Gestion de l'information par
la modélisation des informations de la construction —
Partie 1: Concepts et principes
Reference number
ISO 19650-1:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms . 1
3.2 Terms related to assets and projects . 2
3.3 Terms related to information management . 3
4 Asset and project information, perspectives and collaborative working .6
4.1 Principles . 6
4.2 Information management according to the ISO 19650 series . 6
4.3 Information management perspectives . 7
5 Definition of information requirements and resulting information models .8
5.1 Principles . 8
5.2 Organizational information requirements (OIR) .10
5.3 Asset information requirements (AIR) .10
5.4 Project information requirements (PIR) .10
5.5 Exchange information requirements (EIR) .10
5.6 Asset information model (AIM) .11
5.7 Project information model (PIM) .11
6 The information delivery cycle .11
6.1 Principles .11
6.2 Alignment with the asset life cycle .11
6.3 Setting information requirements and planning for information delivery .13
6.3.1 General principles .13
6.3.2 Delivery team provides information for asset owner/operator or client
decisions .15
6.3.3 Information verification and validation at start and end of project stages.15
6.3.4 Information is drawn from the whole delivery team .16
6.3.5 Summary of information delivery from project and asset delivery teams .17
7 Project and asset information management functions .18
7.1 Principles .18
7.2 Asset information management functions .19
7.3 Project information management functions .19
7.4 Task information management functions .19
8 Delivery team capability and capacity .20
8.1 Principles .20
8.2 Extent of capability and capacity review .20
9 Information container-based collaborative working .20
10 Information delivery planning.21
10.1 Principles .21
10.2 Timing of information delivery .21
10.3 Responsibility matrix .22
10.4 Defining the federation strategy and breakdown structure for information containers.22
11 Managing the collaborative production of information .23
11.1 Principles .23
11.2 Level of information need.23
11.3 Information quality .23
12 Common data environment (CDE) solution and workflow .24
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

12.1 Principles .24
12.2 The work in progress state .25
12.3 The check/review/approve transition .25
12.4 The shared state .25
12.5 The review/authorize transition .26
12.6 The published state .26
12.7 The archive state .26
13 Summary of “building information modelling (BIM) according to the ISO 19650 series” .26
Annex A (informative) Illustrations of federation strategies and information container
breakdown structures .30
Bibliography .34
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,
SC 13, Organization and digitization of information about buildings and civil engineering works, including
building information modelling (BIM).
A list of all parts in the ISO 19650 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
© ISO 2018 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

Introduction
This document sets out the recommended concepts and principles for business processes across the
built environment sector in support of the management and production of information during the
life cycle of built assets (referred to as “information management”) when using building information
modelling (BIM). These processes can deliver beneficial business outcomes to asset owners/operators,
clients, their supply chains and those involved in project funding including increase of opportunity,
reduction of risk and reduction of cost through the production and use of asset and project information
models. In this document, the verbal form “should” is used to indicate a recommendation.
This document is primarily intended for use by:
— those involved in the procurement, design, construction and/or commissioning of built assets; and
— those involved in delivering asset management activities, including operations and maintenance.
This document is applicable to built assets and construction projects of all sizes and all levels of
complexity. This includes large estates, infrastructure networks, individual buildings and pieces
of infrastructure and the projects or sets of projects that deliver them. However, the concepts and
principles included in this document should be applied in a way that is proportionate and appropriate to
the scale and complexity of the asset or project. This is particularly the case where small and medium-
sized enterprises are mainly appointed for asset management or project delivery. It is also important
that procurement and mobilization of asset or project appointed parties should be integrated as far as
possible with existing processes for technical procurement and mobilization.
The concepts and principles contained in this document are aimed at all those involved in the asset life
cycle. This includes, but is not limited to, the asset owner/operator, the client, the asset manager, the
design team, the construction team, an equipment manufacturer, a technical specialist, a regulatory
authority, an investor, an insurer and an end-user.
The specific requirements for information management during the delivery of built assets are provided
in ISO 19650-2. These are based on the concepts and principles within this document, but on its own
this document includes no obligation to apply ISO 19650-2 or any other part of the ISO 19650 series to
be published.
There are many different ways that asset owners/operators or clients can best meet their particular
requirements or respond to their national contexts. This includes procurement routes and appointment
arrangements. The concepts and principles for information management described in this document
should be adopted and applied in accordance with the specific circumstances and requirements of the
asset management or project delivery activities. The information requirements should specify or guide
how this will be achieved and the details should be agreed in time for the requirements to be delivered
efficiently and effectively.
Collaboration between the participants involved in construction projects and in asset management
is pivotal to the efficient delivery and operation of assets. Organizations are increasingly working
in new collaborative environments to achieve higher levels of quality and greater re-use of existing
knowledge and experience. A significant outcome of these collaborative environments is the potential
to communicate, re-use and share information efficiently, and to reduce the risk of loss, contradiction
or misinterpretation.
True collaborative working requires mutual understanding and trust and a deeper level of standardized
process than has typically been experienced, if the information is to be produced and made available
in a consistent timely manner. Information requirements need to pass along supply chains to the point
where information can be most efficiently produced, and information needs to be collated as it is passed
back. At present, considerable resources are spent on making corrections to unstructured information
or incorrect management of information by untrained personnel, on solving problems arising from
uncoordinated efforts of delivery teams, and on solving problems related to information reuse and
reproduction. These delays can be reduced if the concepts and principles within this document are
adopted.
vi © ISO 2018 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

To improve future editions of the ISO 19650 series, national asset owners, public clients and authorities
are recommended to gather information and experiences about its implementation and use.
The ISO 19650 series can benefit from a formal process for managing assets, for example as in the
ISO 55000 series. The ISO 19650 series can also benefit from a systematic approach to quality within an
organization, for example as in ISO 9001, although certification to ISO 9001 is not a requirement of the
ISO 19650 series. Other standards that relate to information structures and delivery methods are also
listed in the Bibliography.
© ISO 2018 – All rights reserved vii

---------------------- Page: 13 ----------------------

SIST EN ISO 19650-1:2019

---------------------- Page: 14 ----------------------

SIST EN ISO 19650-1:2019
INTERNATIONAL STANDARD ISO 19650-1:2018(E)
Organization and digitization of information about
buildings and civil engineering works, including building
information modelling (BIM) — Information management
using building information modelling —
Part 1:
Concepts and principles
1 Scope
This document outlines the concepts and principles for information management at a stage of maturity
described as “building information modelling (BIM) according to the ISO 19650 series”.
This document provides recommendations for a framework to manage information including
exchanging, recording, versioning and organizing for all actors.
This document is applicable to the whole life cycle of any built asset, including strategic planning,
initial design, engineering, development, documentation and construction, day-to-day operation,
maintenance, refurbishment, repair and end-of-life.
This document can be adapted to assets or projects of any scale and complexity, so as not to hamper the
flexibility and versatility that characterize the large range of potential procurement strategies and so
as to address the cost of implementing this document.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
3.1 General terms
3.1.1
responsibility matrix
chart that describes the participation by various functions in completing tasks or deliverables
Note 1 to entry: A responsibility matrix can indicate accountability, consultation and informing, alongside the
obligation to complete tasks or deliverables.
[SOURCE: ISO 37500:2014, 3.16, modified — The word “roles” has been replaced with “functions”; the
words “for an outsourcing arrangement” have been removed; Note 1 to entry has been added.]
© ISO 2018 – All rights reserved 1

---------------------- Page: 15 ----------------------

SIST EN ISO 19650-1:2019
ISO 19650-1:2018(E)

3.1.2
space
limited three-dimensional extent defined physically or notionally
[SOURCE: ISO 12006-2:2015, 3.1.8]
3.2 Terms related to assets and projects
3.2.1
actor
person, organization or organizational unit involved in a construction process
Note 1 to entry: Organizational units include, but are not limited to, departments, teams.
Note 2 to entry: In the context of this document, construction processes take place during the delivery phase
(3.2.11) and the operational phase (3.2.12).
[SOURCE: ISO 29481-1:2016, 3.1, modified — The words “such as a department, team, etc.” have been
removed; Note 1 and 2 to entry have been added.]
3.2.2
appointment
agreed instruction for the provision of information (3.3.1) concerning works, goods or services
Note 1 to entry: This term is used whether or not there is a formal appointment between the parties.
3.2.3
appointed party
provider of information (3.3.1) concerning works, goods or services
Note 1 to entry: A lead appointed party should be identified for each delivery team (3.2.6) but this can be the
same organization as one of the task teams (3.2.7).
Note 2 to entry: This term is used whether or not there is a formal written appointment (3.2.2) in place.
3.2.4
appointing party
receiver of information (3.3.1) concerning works, goods or services from a lead appointed party (3.2.3)
Note 1 to entry: In some countries the appointing party can be termed client (3.2.5), owner or employer but the
appointing party is not limited to these functions.
Note 2 to entry: This term is used whether or not there is a formal appointment (3.2.2) between the parties.
3.2.5
client
actor (3.2.1) responsible for initiating a project and approving the brief
3.2.6
delivery team
lead appointed party (3.2.3) and their appointed parties
Note 1 to entry: A delivery team can be any size, from one person carrying out all the necessary functions through
to
...

SLOVENSKI STANDARD
oSIST prEN ISO 19650-1:2017
01-maj-2017
2UJDQL]DFLMDSRGDWNRYRJUDGEHQLKGHOLK8SUDYOMDQMHSRGDWNRY]XSRUDER
PRGHOLUDQMDLQIRUPDFLMR]JUDGELGHO3RMPLLQQDþHOD ,62',6
Organization of information about construction works - Information management using
building information modelling - Part 1: Concepts and principles (ISO/DIS 19650-1:2017)
Organisation von Daten zu Bauwerken - Informationsmanagement mit BIM - Teil 1:
Konzepte und Grundsätze (ISO/DIS 19650-1:2017)
Ta slovenski standard je istoveten z: prEN ISO 19650-1
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
oSIST prEN ISO 19650-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19650-1:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19650-1:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19650-1
ISO/TC 59/SC 13 Secretariat: SN
Voting begins on: Voting terminates on:
2017-02-17 2017-05-11
Organization of information about construction works —
Information management using building information
modelling —
Part 1:
Concepts and principles
Titre manque
ICS: 91.010.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19650-1:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Asset and project information, perspectives and collaborative working .6
4.1 Principles . 6
4.2 Supporting container-based collaborative working . 6
4.3 Information management perspectives . 7
5 Definition of requirements . 8
5.1 Principles . 8
5.2 Organizational information requirements .10
5.3 Asset information requirements .10
5.4 Project information requirements .11
5.5 Exchange information requirements .11
6 The information delivery cycle .11
6.1 Principles .11
6.2 The information life cycle .11
6.3 Setting information requirements and planning for information delivery .13
6.3.1 General principles .13
6.3.2 Supply chain provides information for asset owner/operator or project
client decisions .15
6.3.3 Information verification and validation at start and end of project stages.15
6.3.4 Information is drawn from the whole supply chain .16
6.3.5 Summary of information delivery along project and asset supply chains .17
7 Project and asset information management roles .18
7.1 Principles .18
7.2 Roles for information production and information process .19
7.3 Asset information management roles .19
7.4 Project information management roles.19
7.5 Task information management roles .19
8 Container-based collaborative working .20
9 Appointed party capability and capacity .20
9.1 Principles .20
9.2 Extent of capability and capacity assessment .20
10 Information delivery planning.21
10.1 Principles .21
10.2 Timing of information delivery .21
10.3 Responsibility matrix .22
10.4 Defining the scope of information to be delivered .22
11 Managing the collaborative production of information .24
11.1 Principles .24
11.2 Level of information need.24
12 Common Data Environment .24
12.1 Principles .24
12.2 The work in progress state .26
12.3 The check/review/approve transition .26
12.4 The shared state .26
12.5 The review/authorize transition .27
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

12.6 The published state .27
12.7 The archived state .27
13 Summary of information delivery cycle .27
Annex A (informative) Table of project and task information management roles .29
Annex B (informative) Illustration of a UK project workflow within the CDE .30
Bibliography .33
iv © ISO 2017 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: <>
Foreword - Supplementary information
The committee responsible for this document is ISO/TC 59, Buildings and civil engineering works, SC 13,
Organization of information about construction works.
This publication does not purport to include all the necessary provisions of a contract. Users are
responsible for its correct application. Compliance with an International Standard cannot confer
immunity from legal obligations.
© ISO 2017 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

Introduction
This International Standard sets out the concepts and principles for the business processes across the
built environment sector in support of management and production of information during the life cycle
of built assets, referred to as “information management” in the text, when using building information
modelling (BIM). These processes can deliver beneficial business outcomes to asset owners/operators,
project clients, their supply chains, and those involved in project funding including reduction of risk
and reduction of cost through the creation and use of asset and project information models.
This International Standard is primarily intended for use by:
— those involved in the procurement, design, construction and/or commissioning of built assets; and
— those involved in delivering asset management activities, including operations and maintenance.
This International Standard is applicable to built assets and construction projects of all sizes and all
levels of complexity. This includes large estates, infrastructure networks, individual buildings and
pieces of infrastructure, and the projects or programmes that deliver them. The concepts and principles
included in this part of the standard should be applied in a way that is proportionate and appropriate to
the scale and complexity of the asset or project. In particular, procurement and mobilization of asset or
project appointed parties should be integrated as far as possible with existing processes for technical
procurement and mobilization.
The specific requirements for information management during the delivery of built assets, based on the
concepts and principles within this document, are provided in Part 2 of this International Standard.
Collaboration between the participants involved in construction projects and in asset management is
pivotal to the efficient delivery and operation of facilities. Organizations are increasingly working in new
collaborative environments in order to achieve higher standards of quality and greater re-use of existing
knowledge and experience. A major constituent of these collaborative environments is the ability to
communicate, re-use and share data efficiently without loss, contradiction or misinterpretation.
True collaborative working requires mutual understanding and trust within the team and a deeper
level of standardized process than has typically been experienced, if the information is to be produced
and made available in a consistent timely manner. Information requirements have to pass along
supply chains to the point where information can be most efficiently produced, and information has
to be collated as it is passed back. At present, each year considerable resources are spent on making
corrections to unstructured data, training new personnel in approved data creation techniques,
coordinating the efforts of supply chain teams and solving problems related to data reproduction.
This is considered waste and can be reduced if the concepts and principles within this International
Standard are adopted.
ISO 19650 builds on the formal process for managing assets by systematically asset management
policies, strategies and plans, as identified in the ISO 55000- series of standards. ISO 19650 also relies
on the systematic approach to quality within an organization that is defined in ISO 9001, although
certification to ISO 9001 is not a requirement of ISO 19650. Other standards that relate to information
structures and delivery methods are listed in the Bibliography.
vi © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 19650-1:2017
DRAFT INTERNATIONAL STANDARD ISO/DIS 19650-1:2017(E)
Organization of information about construction works —
Information management using building information
modelling —
Part 1:
Concepts and principles
1 Scope
This document is one part of an International Standard for information management using building
information modelling (BIM). It sets out the concepts and principles for successful information
management at a stage of maturity described as “BIM according to ISO 19650”.
This International Standard provides recommendations for a framework to manage information
including exchanging, recording, versioning and organizing for all actors addressing every working
environment.
This standard applies to the whole life cycle of a built asset, including strategic planning, initial design
and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.
The concepts and principles contained in this part of the standard are aimed at all those involved in
the asset life cycle. This includes, but is not limited to, the asset owner/operator, the project client, the
asset manager, the design team, the construction supply chain, an equipment manufacturer, a system
specialist, a regulator and an end-user.
There are many different procurement routes and appointment arrangements for asset
owners/operators or project clients to choose from to best meet their specific requirements. Although
the roles, procedures, processes, activities or tasks described in all other parts of this standard
might vary, the concepts and principles described in this document should be adopted and applied
in accordance with the specific circumstances and requirements of the asset management or project
delivery activities. The information requirements should specify or guide how this will be achieved and
the details should be agreed in time for the requirements to be delivered efficiently and effectively.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 9001, Quality management systems — Requirements
ISO 55000, Asset management — Overview, principles and terminology
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
acceptance criteria
evidence required for considering that requirements have been fulfilled
[SOURCE: ISO 22263:2008, 2.1]
© ISO 2017 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

3.2
actor
person, organization or organizational unit (such as a department, team, etc.) involved in a
construction process
[SOURCE: ISO 29481-1:2016, 3.1]
3.3
appointment
confirmed instruction to deliver goods or services
3.4
appointed party
provider of goods or services to an appointing party (3.5)
Note 1 to entry: This term is used whether or not there is a formal appointment between the parties.
3.5
appointing party
person or organization making an appointment (3.3) or issuing a work instruction
Note 1 to entry: In some countries the appointing party might be termed client or employer.
Note 2 to entry: This term is used whether or not there is a formal appointment between the parties.
3.6
asset
item, thing or entity that has potential or actual value to an organization
[SOURCE: ISO 55000:2014, 3.2.1]
3.7
asset information model (AIM)
information model (3.25) relating to the operation of an asset
3.8
asset information requirements (AIR)
specification for data (3.15) and information (3.22) by the asset owner/operator in relation to the
asset(s) it is responsible for
3.9
BIM execution plan
plan that explains how the information management aspects of the appointment (3.3) will be carried
out by the delivery team (3.17)
Note 1 to entry: The pre-appointment BIM execution plan focuses on the delivery team’s proposed approach to
information management, and their capability and capacity to manage information.
3.10
building information modelling (BIM)
use of a shared digital representation of a built object (including buildings, bridges, roads, process
plants, etc.) to facilitate design, construction and operation processes to form a reliable basis for
decisions
[SOURCE: ISO 29481-1:2016, 3.2]
3.11
client
person or organization responsible for initiating a project and approving the brief
[SOURCE: Adapted from ISO 6707-1:2014, 8.3]
2 © ISO 2017 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

3.12
common data environment (CDE)
single source of information for any given project or asset (3.6), for collecting, managing and
disseminating each element of the information model (3.25) through a managed process
3.13
container
named persistent set of data and information within a file, system or application storage hierarchy
EXAMPLE Including directory, sub-directory, data file (including model, document, table, schedule), or
distinct sub-set of a data file such as a chapter or section, layer or symbol.
3.14
container-based collaborative working
cooperation between members of an asset or project team using containers (3.13) for sharing asset or
project information
3.15
data
observations that in context yield information
[SOURCE: Skyrme and Amidon, Knowledge management, 1997]
3.16
delivery phase
the part of the asset life cycle, during which, the asset is designed, constructed and commissioned
Note 1 to entry: Delivery phase is normally associated with the project as a stage-based approach.
3.17
delivery team
team assembled by the lead appointed party to provide the goods or services
Note 1 to entry: A delivery team typically consists of task teams from within the lead appointed party’s
organization and/or sub-appointed organizations.
Note 2 to entry: In some countries a delivery team might be assembled by the appointing party.
3.18
delivery team mobilization plan
plan which sets out the activities and tasks needed to establish and maintain the required capability
and capacity of the delivery team (3.17)
Note 1 to entry: The delivery team mobilization plan is developed during the tender stage and implemented
following appointment.
3.19
exchange information requirements (EIR)
specification for data and information by the appointing party (3.5) that the appointed party (3.4) is
expected to meet during the appointment (3.3)
3.20
handback
transfer of information from a project delivery team to an asset owner/operator at the end of a project
3.21
handover
transfer of information from an asset owner/operator to a project delivery team at the start of a project
© ISO 2017 – All rights reserved 3

---------------------- Page: 11 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

3.22
information
meaningful data
[SOURCE: ISO 22263:2008, 2.6]
3.23
information delivery milestone
a scheduled event for the delivery of the information model (3.25)
[SOURCE: Adapted from ISO/IEC/IEEE 24765:2010, 3.1788]
3.24
information exchange
structured set of information compiled at a defined point during an appointment (3.3) with defined
format and fidelity
3.25
information model
collective term for geometrical models, structured data and documentation
Note 1 to entry: The contents of an information model could include reports, specifications, system or component
data or information, geometrical data or information, and so on.
3.26
information standard
document that defines the requirements to be met for data or information to be exchanged between
parties and/or integrated with other data or information
3.27
key decision point
a point in time during the asset life cycle when a decision crucial to the direction or viability of the asset
(3.6) or project is made
3.28
level of information need
description of detail required in an information deliverable
Note 1 to entry: One purpose of defining the level of information need is to prevent delivery of too much
information.
3.29
life cycle
the life of the system from the definition of its requirements to the termination of its use, covering its
conception, development, operation, maintenance support and disposal
[SOURCE: Adapted from ISO/TS 12911:2012, 3.13]
3.30
master information delivery plan (MIDP)
primary plan describing when data and information is to be produced and by whom
Note 1 to entry: The master information delivery plan incorporates all relevant task information delivery plans.
3.31
operational phase
the part of the asset life cycle, during which the asset is used, operated and maintained
3.32
organizational information requirements (OIR)
specification for data and information by the asset owner/operator to achieve their organizational
objectives
4 © ISO 2017 – All rights reserved

---------------------- Page: 12 ----------------------
oSIST prEN ISO 19650-1:2017
ISO/DIS 19650-1:2017(E)

3.33
plan of work
document that details principal stages in design, construction and maintenance of building and civil
engineering projects that identifies main tasks and persons
[SOURCE: ISO 6707-2]
3.34
project information model (PIM)
information model (3.25) relating to the delivery phase of an asset
3.35
project information protocol
terms and clauses of appointment (3.3) specifically relating to the exchange of information between
appointing and appointed parties
3.36
project information requirements (PIR)
specification for data and information by the project client to make informed decisions at each stage of
the project
3.37
project sponsor
person or organization that provides the financial resources for the project
[SOURCE: Adapted from ISO/IEC/IEEE 24765:2010, 3.2838]
3.38
reference information
information made available to a task team, against which they are required to coordinate their
information
3.39
responsibility matrix
chart that describes the participation by various roles in completing tasks or deliverables
[SOURCE: Adapted from ISO 37500:2014, 3.16]
3.40
revision
major change to an information deliverable
3.41
shared resource
resource available to all delivery team members to improve consistency and reduce duplication of effort
EXAMPLE Templates, libraries.
3.42
suitability code
meta-data describing the permitted use of an information deliverable
3.43
task information delivery plan (TIDP)
schedule of information deliverables and delivery dates, for a specific sub-division of a project
3.44
trigg
...

SLOVENSKI STANDARD
oSIST prEN ISO 19650-1:2018
01-marec-2018
2UJDQL]DFLMDSRGDWNRYRJUDGEHQLKGHOLK8SUDYOMDQMHSRGDWNRY]XSRUDER
PRGHOLUDQMDLQIRUPDFLMR]JUDGELGHO3RMPLLQQDþHOD ,62',6
Organization of information about construction works - Information management using
building information modelling - Part 1: Concepts and principles (ISO/DIS 19650-1:2018)
Organisation von Daten zu Bauwerken - Informationsmanagement mit BIM - Teil 1:
Konzepte und Grundsätze (ISO/DIS 19650-1:2018)
Ta slovenski standard je istoveten z: prEN ISO 19650-1
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
oSIST prEN ISO 19650-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19650-1:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19650-1:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19650-1.2
ISO/TC 59/SC 13 Secretariat: SN
Voting begins on: Voting terminates on:
2018-01-19 2018-03-16
Organization of information about construction works —
Information management using building information
modelling —
Part 1:
Concepts and principles
Organisation des informations concernant les ouvrages de construction — Gestion de l'information par la
modélisation des informations de la construction —
Partie 1: Concepts et principes
ICS: 35.240.67; 91.010.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19650-1.2:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/DIS 19650-1.2:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by ISO/TC 59, Buildings and civil engineering works, SC 13, Organization of
information about construction works.
A list of all parts in the ISO 19650 series, published under the general title Organization of information
about construction works — Information management using building information modelling, can be
found on the ISO website.
ii © ISO 2018 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
Introduction
This document sets out the recommended concepts and principles for business processes across the
built environment sector in support of the management and production of information during the life
cycle of built assets (referred to as “information management”) when using building information
modelling (BIM). These processes can deliver beneficial business outcomes to asset owners/operators,
clients, their supply chains, and those involved in project funding including increase of opportunity,
reduction of risk and reduction of cost through the production and use of asset and project information
models. In line with ISO drafting standards, the auxiliary verb in a recommendation is “should”.
This document is primarily intended for use by:
— those involved in the procurement, design, construction and/or commissioning of built assets; and
— those involved in delivering asset management activities, including operations and maintenance.
This document is applicable to built assets and construction projects of all sizes and all levels of
complexity. This includes large estates, infrastructure networks, individual buildings and pieces of
infrastructure, and the projects or programmes that deliver them. However, the concepts and principles
included in this document should be applied in a way that is proportionate and appropriate to the scale
and complexity of the asset or project. This is particularly the case where small and medium-sized
enterprises are mainly appointed for asset management or project delivery. It is also important that
procurement and mobilization of asset or project appointed parties should be integrated as far as
possible with existing processes for technical procurement and mobilization.
The specific requirements for information management during the delivery of built assets are provided
in ISO 19650-2. These are based on the concepts and principles within this document but on its own
this document includes no obligation to apply ISO 19650-2. Further Parts of ISO 19650 might be
published subsequently.
The concepts and principles contained in this document are aimed at all those involved in the asset life
cycle. This includes, but is not limited to, the asset owner/operator, the client, the asset manager, the
design team, the construction team, an equipment manufacturer, a system specialist, a regulator, an
investor, an insurer and an end-user.
There are many different ways that asset owners/operators or clients can best meet their particular
requirements or respond to their national contexts. This includes procurement routes and appointment
arrangements. The concepts and principles for information management described in this document
should be adopted and applied in accordance with the specific circumstances and requirements of the
asset management or project delivery activities. The information requirements should specify or guide
how this will be achieved and the details should be agreed in time for the requirements to be delivered
efficiently and effectively.
Collaboration between the participants involved in construction projects and in asset management is
pivotal to the efficient delivery and operation of assets. Organizations are increasingly working in new
collaborative environments in order to achieve higher levels of quality and greater re-use of existing
knowledge and experience. A significant outcome of these collaborative environments is the potential to
communicate, re-use and share information efficiently, and reducing the risk of loss, contradiction or
misinterpretation.
True collaborative working requires mutual understanding and trust and a deeper level of standardized
process than has typically been experienced, if the information is to be produced and made available in
a consistent timely manner. Information requirements have to pass along supply chains to the point
where information can be most efficiently produced, and information has to be collated as it is passed
back. At present, each year considerable resources are spent on making corrections to unstructured
information or incorrect management of information by untrained personnel, on solving problems
© ISO 2018 – All rights reserved iii

---------------------- Page: 6 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
arising from uncoordinated efforts of delivery teams, and on solving problems related to information
reuse and reproduction. This is considered waste and can be reduced if the concepts and principles
within this document are adopted.
In order to improve future editions of the ISO 19650 series, national asset owners, public clients and
authorities are recommended to gather information and experiences about its implementation and use.
The ISO 19650 series can benefit from a formal process for managing assets, for example the ISO 55000
series. ISO 19650 can also benefit from a systematic approach to quality within an organization, for
example as in ISO 9001, although certification to ISO 9001 is not a requirement of ISO 19650. Other
standards that relate to information structures and delivery methods are also listed in the Bibliography.
In addition, there are several standards required for the successful implementation of this document
that relate to specific regions and countries and that are not suitable for inclusion within an
international standard. National standards bodies are encouraged to compile and document the
standards relevant to the region or country they represent within a national annex.

iv © ISO 2018 – All rights reserved

---------------------- Page: 7 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/DIS 19650-1.2 :2018(E)

Organization of information about construction works —
Information management using building information
modelling — Part 1: Concepts and Principles
1 Scope
This document outlines the concepts and principles for information management at a stage of maturity
described as “building information modelling (BIM) according to ISO 19650”.
This document provides recommendations for a framework to manage information including
exchanging, recording, versioning and organizing for all actors.
This document is applicable to the whole life cycle of a built asset, including strategic planning, initial
design, engineering, development, documentation and construction, day-to-day operation, maintenance,
refurbishment, repair and end-of-life.
However, regarding the large scale of types of assets and sizes of organizations to which this document
is applicable, the recommendations of this standard should not hamper flexibility and versatility that
characterize the large range of potential procurement strategies. Therefore, the concepts and principles
explained in this document should be adapted to the scale and complexity of the asset or project, in
order to address the cost of implementing this standard.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1 General terms
3.1.1
responsibility matrix
chart that describes the participation by various functions in completing tasks or deliverables
[SOURCE: ISO 37500:2014, 3.16 – modified]
Note 1 to entry: A responsibility matrix can indicate accountability, consultation and informing, alongside the
obligation to complete tasks or deliverables.
3.1.2
space
limited three-dimensional extent defined physically or notionally
© ISO 2018 – All rights reserved
1

---------------------- Page: 8 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
[SOURCE: ISO 12006-2:2015, 3.1.8]
3.2 Terms related to assets and projects
3.2.1
actor
person, organization or organizational unit (such as a department, team, etc.) involved in a construction
process
[SOURCE: ISO 29481-1:2016, 3.1]
Note 1 to entry: Organizational units include, but are not limited to, departments, teams.
Note 2 to entry: In the context of this document, construction processes take place during the delivery phase and
the operational phase
3.2.2
appointment
agreed instruction for the provision of works, goods or services
Note 1 to entry: This term is used whether or not there is a formal appointment between the parties.
3.2.3
appointed party
provider of works, goods or services
Note 1 to entry: A lead appointed party should be identified for each delivery team but this might be the same
organization as one of the task teams.
Note 2 to entry: This includes the provision of required information concerning the works, goods or services
Note 3 to entry: This term is used whether or not there is a formal written appointment in place.
3.2.4
appointing party
Receiver of works, goods or services from a lead appointed party
Note 1 to entry: In some countries the appointing party might be termed client, owner or employer but the
appointing party is not limited to these roles.
Note 2 to entry: This includes the receipt of required information concerning the works, goods or services.
Note 3 to entry: An appointing party may, in many cases, engage third parties or appoint an appointed party to
assist them in their information management tasks, particularly where the appointing party does not have the
capacity or capability in-house, provided this does not create a conflict of interest.
Note 4 to entry: This term is used whether or not there is a formal appointment between the parties.
3.2.5
client
actor responsible for initiating a project and approving the brief
[SOURCE: ISO 6707-1:2014, 8.3 – modified]
© ISO 2018 – All rights reserved
2

---------------------- Page: 9 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
3.2.6
delivery team
lead appointed party and their appointed parties
Note 1 to entry: A delivery team can be any size, from one person carrying out all the necessary functions
through to complex, multi-layered task teams. The size and structure of each delivery team are in response to the
scale and complexity of the asset management or project delivery activities.
Note 2 to entry: Multiple delivery teams can be appointed simultaneously and/or sequentially in connection
with a single asset or project, in response to the scale and complexity of the asset management or project delivery
activities.
Note 3 to entry: A delivery team can consist of multiple task teams from within the lead appointed party’s
organization and any appointed parties.
Note 4 to entry: In some countries a delivery team might be assembled by the appointing party rather than the
lead appointed party.
3.2.7
task team
appointed parties who as part of their appointment produce or generate information containers
3.2.8
asset
item, thing or entity that has potential or actual value to an organization
[SOURCE: ISO 55000:2014, 3.2.1]
3.2.9
project
appointment by which a construction works or part of it is executed
[SOURCE: ISO 6707-2:2014, 3.8 – modified]
3.2.10
life cycle
life of the asset from the definition of its requirements to the termination of its use, covering its
conception, development, operation, maintenance support and disposal
[SOURCE: ISO/TS 12911:2012, 3.13 – modified]
3.2.11
delivery phase
part of the life cycle during which an asset is designed, constructed and commissioned
Note 1 to entry: Delivery phase normally reflects a stage-based approach to a project.
3.2.12
operational phase
part of the life cycle, during which the asset is used, operated and maintained
3.2.13
trigger event
planned or unplanned event that changes an asset or its status during its life cycle, which results in
information exchange
© ISO 2018 – All rights reserved
3

---------------------- Page: 10 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
Note 1 to entry: During the delivery phase, trigger events normally reflect the ends of project stages.
3.2.14
key decision point
point in time during the life cycle when a decision crucial to the direction or viability of the asset is made
Note 1 to entry: During a project these generally align with project stages.
3.3 Terms related to information management
3.1.1
information
reinterpretable representation of data in a formalized manner, suitable for communication,
interpretation or processing
[SOURCE: adapted from IEC 82045-1:2001, 3.1.4 “data”]
Note 1 to entry: Information can be processed by human or automatic means.
3.3.2
information requirement
specification for what, when, how and for whom information is to be produced
3.3.3
organizational information requirements
OIR
information requirements in relation to organizational objectives
3.3.4
asset information requirements
AIR
information requirements in relation to the operation of an asset
3.3.5
project information requirements
PIR
information requirements in relation to the delivery of an asset
3.3.6
exchange information requirements
EIR
information requirements in relation to an appointment
3.3.7
information exchange (verb)
act of satisfying an information requirement or part thereof
3.3.8
information model
set of structured and unstructured information containers
Note 1 to entry: Structured information containers include graphical models, schedules, databases.
Unstructured information containers include documentation, video clips, sound recordings.
© ISO 2018 – All rights reserved
4

---------------------- Page: 11 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
3.3.9
asset information model
AIM
information model relating to the operational phase
3.3.10
project information model
PIM
information model relating to the delivery phase
3.3.11
federation
creation of a composite information model from separate information containers
Note 1 to entry: The separate information containers used during federation might come from different task
teams.
3.3.12
information container
named persistent set of information retrievable from within a file, system or application storage
hierarchy
EXAMPLE Including sub-directory, information file (including model, document, table, schedule), or distinct
sub-set of an information file such as a chapter or section, layer or symbol.
Note 1 to entry: Persistent information exists over a timescale long enough for it to have to be managed, i.e. this
excludes transient information such as internet search results.
Note 2 to entry: Naming of an information container should be according to an agreed naming convention.
3.3.13
status code
meta-data describing the suitability of the content of an information container
3.3.14
building information modelling
BIM
use of a shared digital representation of a built asset to facilitate design, construction and operation
processes to form a reliable basis for decisions
[SOURCE: ISO 29481-1:2016, 3.2 – modified]
Note 1 to entry: Built assets include, but are not limited to, buildings, bridges, roads, process plants.
3.3.15
common data environment
CDE
agreed source of information for any given project or asset, for collecting, managing and disseminating
each information container through a managed process
3.3.16
level of information need
framework which defines the extent and granularity of information
© ISO 2018 – All rights reserved
5

---------------------- Page: 12 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
Note 1 to entry: One purpose of defining the level of information need is to prevent delivery of too much
information.
3.3.17
BIM execution plan
plan that explains how the information management aspects of the appointment will be carried out by
the delivery team
Note 1 to entry: The pre-appointment BIM execution plan focuses on the delivery team’s proposed approach to
information management, and their capability and capacity to manage information.
3.3.18
capability
skill, knowledge or expertise to manage information
Note: There is an existing TC/59 definition “quality of being able to perform a given activity” SOURCE
ISO 6707-1:2014, 9.1.11]
3.3.19
capacity
means, resources and procedures to manage information
Note: definitions from existing standards include: “current amount of resource available” [SOURCE
ISO/IEC 10164-11:1994, 3.7.1 (adapted)], “resources necessary to execute organizational
commitments” [SOURCE ISO 30400:2016, 4.3 (adapted)]
4 Asset and project information, perspectives and collaborative working
4.1 Principles
Asset and project information models are the structured repositories of information needed for making
decisions during the whole life cycle of a built environment asset. This includes the design and
construction of new assets, refurbishment of existing assets, and the operation and maintenance of an
asset. It should be expected that the amount of information stored in information models, and the
different purposes it will be used for, will mostly increase during project delivery and asset
management.
Asset and project information models can include structured and unstructured information. Examples
of structured information include graphical models, schedules and databases. Examples of unstructured
information include documentation, video clips and sound recordings. Non-digitized data, such as soil
samples and other physical sources of information, should be managed using the information
management process through appropriate cross-references, for example, sample numbers.
Most projects involve work on some kind of existing asset, even if this is a previously undeveloped site.
These projects should include some pre-existing asset information, to support the development of the
project brief and be available for lead appointed parties working on the project.
Information management processes within this document include the transfer of relevant information
between an asset information model and a project information model at the start and end of a project.
Asset and project information has substantial value to appointing, lead appointed and appointed parties
involved in asset management and project delivery. This includes where no formal appointments exist.
Appointing, lead appointed and appointed parties include the owners, operators and managers of built
© ISO 2018 – All rights reserved
6

---------------------- Page: 13 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
assets, and those delivering design and construction projects. Asset and project information is also
valuable to policymakers, regulators, investors, insurers and other external parties.
The concepts and principles contained within this standard should be applied in a way that is
proportionate and appropriate to the scale and complexity of the asset or project.
4.2 Relationship between information management and collaborative working
The recommendations and requirements for information management in the ISO 19650 standard are
based on appointing, lead appointed and appointed parties working collaboratively together, and all
parties should participate in the implementation of ISO 19650.
Information management can be represented as a sequence of maturity stages, shown as Stages 1, 2 and
3 in Figure 1. This Figure shows that development of standards, advances in technology and more
sophisticated forms of information management all combine to deliver increasing business benefit.
ISO 19650 has application mainly at Stage 2 maturity, but also can be partly applied at Stages 1 and 3.
Stage 2 maturity is also identified as “BIM according to ISO 19650”. This is where a mixture of manual
and automated information management processes are used to generate a federated information
model. The information model includes all information containers delivered by task teams in relation to
an asset or project.

Figure 1 — Stages of maturity of analogue and digital information management
4.3 Information management perspectives
Different information management perspectives should be recognized by the information management
process and should be incorporated in the process in the following ways:
— In the specification of information requirements;
— In the planning for information delivery; and
© ISO 2018 – All rights reserved
7

---------------------- Page: 14 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
— In the delivery of information.
Information management perspectives should be defined on a case-by-case basis, but the four
perspectives described in Table 1 are recommended. Other perspectives might also be helpful,
depending on the nature of the asset or project.
Table 1 — Information management perspectives
Perspective Purpose Example deliverables
Business plan
To establish and maintain the purpose of the
Asset owner’s perspective asset or project. To make the strategic Strategic asset portfolio review
business decisions.
Life cycle cost analysis
Project brief
To identify the true requirements of the user
Asset Information Model
Asset user’s perspective and make sure the asset solution has the
Project Information Model
right qualities and capacities.
Product documentation
Plans, for example BIM Execution
To plan and organize the work, mobilize the
Plans
Project delivery or asset
right resources, coordinate and control
management perspective Organizational charts
development.
Function definitions
Political decisions
To make sure the community’s interest is
Society’s perspective taken care of during the asset life cycle Area plans
(planning, delivery and operation).
Building permits, concessions
Note: The example deliverables are relevant to the point of view of each perspective and do not indicate
ownership of the deliverables or who does the work to produce the deliverables.
5 Definition of information requirements and resulting information models
5.1 Principles
The appointing party should understand what information is required concerning their asset(s) or
project(s) in order to support their organizational or project objectives. These requirements might
come from within their own organization or might come from interested external parties. The
appointing party should be able to express these requirements to other organizations and individuals
that have to know them to either specify or inform their work. This applies to assets and projects of all
sizes, but the principles in this document should be applied proportionately. Less experienced
appointing parties can seek expert assistance to help with these tasks.
Appointed parties, including lead appointed parties, might add their own information requirements to
those they receive. Some of the information requirements might be passed to their own appointed
parties, particularly where information exchange within a delivery team is necessary and this
information might not be exchanged with the appointing party.
The appointing party should state their purposes for requiring information deliverables, including the
aspects of the asset that are intended to be managed. These purposes might include:
— Asset register: A register of assets should be provided to support accurate auditing and reporting.
This should include both spatial and physical assets and their groupings;
© ISO 2018 – All rights reserved
8

---------------------- Page: 15 ----------------------
oSIST prEN ISO 19650-1:2018
ISO/ DIS 19650-1.2:2018(E)
— Support for compliance and regulatory responsibilities: The appointing party should specify the
information required to support the maintenance of the health and safety of the users of the asset;
— Risk management: Information should be required or suppressed to support risk management,
especially to identify and review the risks th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.