iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 132421:2002

(Main)

Blank Detail Specification: Fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are required (Safety tests only)

Blank Detail Specification: Fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are required (Safety tests only)

Superseded by EN 60384-14-2:2004 and EN 60384-14-3:2004

Vordruck für Bauartspezifikation: Kondensatoren zur Unterdrückung elektromagnetischer Störungen - Kondensatoren, für die Sicherheitsprüfungen vorgeschrieben sind (Nur Sicherheitsprüfungen)

Blank detail specification: Fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are required (Safety tests only)

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
30-Nov-2005
ICS
31.060.10 - Fixed capacitors
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2005
Due Date
01-Dec-2005
Completion Date
01-Dec-2005
Ref Project
EN 132421:1997 - Blank Detail Specification: Fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are required (Safety tests only)

Relations

Replaced By
SIST EN 60384-14-2:2005 - Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
Effective Date
29-Jan-2023
Replaced By
SIST EN 60384-14-3:2005 - Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ
Effective Date
29-Jan-2023
Replaced By
SIST EN 60384-14-2:2005 - Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
Effective Date
06-May-2014
Replaced By
SIST EN 60384-14-2:2005 - Fixed capacitors for use in electronic equipment -- Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
Effective Date
07-Jun-2022
Replaced By
SIST EN 60384-14-3:2005 - Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ
Effective Date
07-Jun-2022
Replaced By
SIST EN 60384-14-3:2005 - Fixed capacitors for use in electronic equipment -- Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ
Effective Date
06-May-2014

Buy Standard

EN 132421:2002EN 132421:2002
PreviousNext
Standard
EN 132421:2002
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blank detail specification: Fixed capacitors for electromagnetic interference suppression - Capacitors for which safety tests are required (Safety tests only)Vordruck für Bauartspezifikation: Kondensatoren zur Unterdrückung elektromagnetischer Störungen - Kondensatoren, für die Sicherheitsprüfungen vorgeschrieben sind (Nur Sicherheitsprüfungen)Blank Detail Specification: Fixed capacitors for electromagnetic interference
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62391-2-1:2006(Main)
Fixed electric double-layer capacitors for use in electronic equipment -- Part 2-1: Blank detail specification - Electric-double layer capacitors for power application - Assessment level EZ
EN 62391-2-1:2006

IEC 62391 consists of the following parts, under the general title Fixed electric double-layer capacitors for use in electronic equipment:
Part 1: Generic specification
Part 2: Sectional specification – Electric double-layer capacitors for power application
The sectional specification mentioned above does have a blank detail specification being a supplementary document, containing requirements for style, layout and minimum content of detail specifications.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62391-2:2006(Main)
Fixed electric double-layer capacitors for use in electronic equipment -- Part 2: Sectional specification - Electric double-layer capacitors for power application
EN 62391-2:2006

This part of IEC 62391 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement classification specified in IEC 62391-1. The definition of power density and its calculating procedure should be in accordance with Annex A.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60384-2-1:2006(Main)
Fixed capacitors for use in electronic equipment -- Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ
EN 60384-2-1:2005

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of details specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into account.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-20:2023(Main)
Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors (IEC 60384-20:2023)
EN IEC 60384-20:2023

IEC 60384-20:2023 is available as which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60384-20:2023 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors can have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage. This part of IEC 60384 specifies preferred ratings and characteristics and selects from IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring methods, and gives general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this sectional specification are of an equal or higher performance level; lower performance levels are not permitted. Capacitors for electromagnetic interference suppression are not included but are covered by IEC 60384‑14. This edition includes the following significant technical changes with respect to the previous edition:
- revision of all parts of the document based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents;
- the document structure has been organized to follow new sectional specification structure decided in TC 40;
- revised tables and Clause 5 so as to prevent duplications and contradictions;
- in Clause 5.2 (Mounting), the Subclauses 5.2.1, 5.2.2 and 5.2.3 have been added;
- in Subclause 5.5 (Shear test), the Subclauses 5.5.1 and 5.5.2 have been added;
- in Subclause 5.14 (Component solvent resistance), the Subclauses 5.14.1 and 5.14.2 have been added. In Table 8 and Table A.2, test 5.14 has been moved before 5.7.5 (Final inspections and requirements) in Group 1A and in Subgroup C1;
- in Subclause 5.15 (Solvent resistance of marking), the Subclauses 5.15.1 and 5.15.2 have been added;
- tangent of loss angle measurement has been added to resistance to soldering heat test;
- lot-by-lot and periodical inspection tables, including requirements, have been moved to Annex A;
- revised Inspection Level (IL) of A1 subgroup.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-23:2023(Main)
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors (IEC 60384-23:2023)
EN IEC 60384-23:2023

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment.
These capacitors have metallized connecting pads or soldering strips and are intended to be
mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors
can have "self-healing properties" depending on conditions of use. They are primarily intended
for applications where the AC component is small with respect to the rated voltage.
This part of IEC 60384 specifies preferred ratings and characteristics, selects from
IEC 60384‑1:2021 the appropriate quality assessment procedures, tests and measuring
methods and gives general performance requirements for this type of capacitor. Test severities
and requirements specified in detail specifications referring to this sectional specification are
of an equal or higher performance level. Lower performance levels are not permitted.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384‑14.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-14:2023(Main)
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2023)
EN IEC 60384-14:2023

IEC 60384-14:2023 applies to capacitors and resistor-capacitor combinations intended to be connected to AC mains or other supply with a nominal voltage not exceeding 1 000 V AC (RMS), and with a nominal frequency not exceeding 100 Hz. This document includes also additional specific conditions and requirements for the connection to DC supplies with a rated voltage not exceeding 1 500 V DC. The principal object of this part of IEC 60384 is to prescribe preferred ratings and characteristics and to select, from IEC 60384-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification are of equal or higher performance level; lower performance levels are not permitted. This document also provides a schedule of safety tests to be used by national testing stations in countries where approval by such stations is required. The overvoltage categories in combination with the AC mains voltages for the capacitors classified in this document are to be taken from IEC 60664-1. This edition includes the following significant technical changes with respect to the previous edition:
- in damp heat steady state test, all capacitor types are tested both with and without rated voltage; the number of test pieces has been increased ;
- tangent of loss angle is added In Group 0 tests, in safety tests
- qualification approval based on safety and performance tests has been removed from the main text to a normative annex;
- the range of rated voltages is given instead of exact rated voltage values;
- normative annex for description of capacitor styles and of creepage/clearance distance measurement has been added;
- the importance of mechanical failures (cracks) in component encapsulation as a safety feature is highlighted in handling instructions and requirements after all relevant tests.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62391-1:2023(Main)
Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification (IEC 62391-1:2022)
EN IEC 62391-1:2022

This part of IEC 62391 applies to fixed electric double-layer capacitors (hereafter referred to as
capacitors) mainly used in DC circuits of electric and electronic equipment.
This part of IEC 62391 establishes standard terms, inspection procedures and methods of test
for use in sectional and detail specifications of electronic components for quality assessment
or any other purpose.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-19:2022(Main)
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (IEC 60384-19:2022)
EN IEC 60384-19:2022

This part of IEC 60384 is applicable to fixed surface mount capacitors for direct current, with
metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment.
These capacitors have metallized connecting pads or soldering strips and are intended to be
mounted directly onto printed boards or onto substrates for hybrid circuits. These capacitors
can have "self-healing properties" depending on conditions of use. They are primarily intended
for applications where the AC component is small with respect to the rated voltage.
This part of IEC 60384 specifies preferred ratings and characteristics, and selects from
IEC 60384-1:2021 the appropriate quality assessment procedures, tests and measuring
methods, and gives general performance requirements for this type of capacitor. Test severities
and requirements specified in detail specifications referring to this sectional specification are
of an equal or higher performance level. Lower performance levels are not permitted.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384-14.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-1-1:2022(Main)
Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail specification (IEC 60384-1-1:2022)
EN IEC 60384-1-1:2022

This part of IEC 60384-1 establishes a generic template and specifies requirements to the
content of detail specifications for capacitors within the IEC 60384-X series.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60384-1:2021(Main)
Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2021)
EN IEC 60384-1:2021

This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use in electronic equipment.
It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day