SIST EN ISO 16663-1:2003

Fishing nets - Method of test for the determination of mesh size - Part 1: Opening of mesh (ISO 16663-1:2003)

This European Standard specifies a method for the determination of size of opening of the mesh of fishing nets using a flat wedge gauge. This Part of the European Standard concerns active gears as they are defined below in 3. Test may be carried out in both the dry and wet states, but tests in the wet state are considered to be particularly appropriate in indicating the behaviour of the netting in use.

Fischnetze - Prüfverfahren zur Bestimmung der Maschenweite - Teil 1: Maschenöffnung (ISO 16663-1:2003)

Filets de peche - Méthode d'essai pour la détermination des dimensions de la maille - Partie 1: Ouverture de maille (ISO 16663-1:2003)

La présente Norme européenne spécifie une méthode de détermination de l'ouverture de maille des filets de peche a l'aide d'une jauge d'épaisseur plate. Cette méthode s'applique aux engins de peche actifs.

Ribiške mreže - Metoda preskušanja določevanja zančne velikosti – 1. del: Odpiranje zanke (ISO 16663-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2003
• Withdrawal Date: 11-May-2009
• ICS: 65.150 - Fishing and fish breeding
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 12-May-2009
• Due Date: 04-Jun-2009
• Completion Date: 12-May-2009
• Ref Project: EN ISO 16663-1:2003 - Fishing nets - Method of test for the determination of mesh size - Part 1: Opening of mesh (ISO 16663-1:2003)

Relations

• Replaced By: SIST EN ISO 16663-1:2009 - Fishing nets - Method of test for the determination of mesh size - Part 1: Opening of mesh (ISO 16663-1:2009)
• Effective Date: 01-Jul-2009
• Replaced By: SIST EN ISO 16663-1:2009 - Fishing nets - Method of test for the determination of mesh size - Part 1: Opening of mesh (ISO 16663-1:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16663-1:2003
01-oktober-2003
5LELãNHPUHåH0HWRGDSUHVNXãDQMDGRORþHYDQMD]DQþQHYHOLNRVWL±GHO
2GSLUDQMH]DQNH,62
Fishing nets - Method of test for the determination of mesh size - Part 1: Opening of
mesh (ISO 16663-1:2003)
Fischnetze - Prüfverfahren zur Bestimmung der Maschenweite - Teil 1: Maschenöffnung
(ISO 16663-1:2003)
Filets de peche - Méthode d'essai pour la détermination des dimensions de la maille -
Partie 1: Ouverture de maille (ISO 16663-1:2003)
Ta slovenski standard je istoveten z: EN ISO 16663-1:2003
ICS:
65.150 Ribolov in ribogojstvo Fishing and fish breeding
SIST EN ISO 16663-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16663-1:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 16663-1:2003
EUROPEAN STANDARD
EN ISO 16663-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2003
ICS 65.150
English version
Fishing nets - Method of test for the determination of mesh size
- Part 1: Opening of mesh (ISO 16663-1:2003)
Filets de pêche - Méthode d'essai pour la détermination Fischnetze - Prüfverfahren zur Bestimmung der
des dimensions de la maille - Partie 1: Ouverture de maille Maschenweite - Teil 1: Maschenöffnung (ISO 16663-
(ISO 16663-1:2003) 1:2003)
This European Standard was approved by CEN on 2 January 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16663-1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16663-1:2003
EN ISO 16663-1:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .5
6 Measuring force .6
7 Requirements for testing .6
8 Procedure .6
9 Calculation and expression of results.7
10 Test report .7
Annex A (informative) Method suitable for all environmental conditions.8
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16663-1:2003
EN ISO 16663-1:2003 (E)
Foreword
This document (EN ISO 16663-1:2003) has been prepared by Technical Committee CEN/TC 248 "Textiles and
textile products", the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 38
"Textiles".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latest
by December 2003.
In this European Standard annex A is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 16663-1:2003
EN ISO 16663-1:2003 (E)
1 Scope
This European Standard specifies a method for the determination of size of opening of the mesh of fishing nets
using a flat wedge gauge. It is applicable to active fishing gears.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this European Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this part of this European Standard are
encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated
below. For undated references, the latest edition of the normative document referred to applies (including
amendments).
EN ISO 1107 Fishing nets - Netting - Basic terms and definitions (ISO 1107:2003)
ISO 139 Textiles - Standard atmospheres for conditioning and testing
3 Terms
...