kSIST FprEN IEC 63203-201-4:2024
(Main)Wearable electronic devices and technologies - Part 201-4: Electronic textile - Test method for determining sheet resistance of conductive fabrics after abrasion
Wearable electronic devices and technologies - Part 201-4: Electronic textile - Test method for determining sheet resistance of conductive fabrics after abrasion
Tragbare elektronische Geräte und Technologien - Teil 201-4: Elektronische Textilien – Prüfverfahren zur Bestimmung der Abriebfestigkeit von leitfähigen textilen Flächengebilden
Technologies et dispositifs électroniques prêts-à-porter - Partie 201-4: Textile électronique - Méthode d'essai pour la détermination de la résistance d’une pièce d’étoffe conductrice après abrasion
Nosljive elektronske naprave in tehnologije - 201-4. del: Elektronski tekstil - Preskusna metoda za ugotavljanje odpornosti prevodne tkanine po obrabi
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 63203-201-4:2024
01-januar-2024
Nosljive elektronske naprave in tehnologije - 201-4. del: Elektronski tekstil -
Preskusna metoda za ugotavljanje odpornosti prevodne tkanine po obrabi
Wearable electronic devices and technologies - Part 201-4: Electronic textile - Test
method for determining sheet resistance of conductive fabrics after abrasion
Technologies et dispositifs électroniques prêts-à-porter - Partie 201-4: Textile
électronique - Méthode d'essai pour la détermination de la résistance d’une pièce
d’étoffe conductrice après abrasion
Ta slovenski standard je istoveten z: prEN IEC 63203-201-4:2023
ICS:
59.080.80 Inteligentne tekstilije Smart textiles
oSIST prEN IEC 63203-201-4:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 63203-201-4:2024
oSIST prEN IEC 63203-201-4:2024
124/246/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63203-201-4 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-10 2024-02-02
SUPERSEDES DOCUMENTS:
124/203/CD, 124/242/CC
IEC TC 124 : WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES
SECRETARIAT: SECRETARY:
Korea, Republic of Mr Jae Yeong Park
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Wearable electronic devices and technologies - Part 201-4: Electronic textile - Test method for
determining sheet resistance of conductive fabrics after abrasion
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 2 124/246/CDV
2 CONTENTS
4 FOREWORD . 3
5 INTRODUCTION . 5
6 1 Scope . 6
7 2 Normative references . 6
8 3 Terms and definitions . 6
9 4 Principle of test . 7
10 5 Test equipment . 7
11 5.1 Abrasion machine . 7
12 5.2 Abradant . 7
13 5.3 Foam . 7
14 5.4 Felt . 7
15 5.5 Test equipment for measurement of sheet resistance . 7
16 6 Test procedure . 7
17 6.1 Sampling and preparation of test specimen . 7
18 6.2 Abradant . 8
19 6.3 Sheet resistance before abrasion treatment . 8
20 6.4 Mounting specimens on abrading tables . 8
21 6.5 Mounting the abradant on test piece holder . 8
22 6.6 Preparation of the abrasion machine . 8
23 6.7 Useful life of auxiliary materials . 8
24 6.8 Abrasion treatment . 8
25 6.9 Determination of sheet resistance after abrasion treatment . 8
26 6.10 Calculation of percent of sheet resistance change . 9
27 7 Test report . 9
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 3 124/246/CDV
35 INTERNATIONAL ELECTROTECHNICAL COMMISSION
36 ____________
38 WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES –
40 Part 201-4: Electronic textile – Test method for determining sheet resistance of
41 conductive fabrics after abrasion
44 FOREWORD
45 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
46 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co -operation on all
47 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities ,
48 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
49 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
50 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
51 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
52 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
53 the two organizations.
54 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
55 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
56 Committees.
57 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
58 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
59 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
60 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
61 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
62 the corresponding national or regional publication shall be clearly indicated in the latter.
63 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
64 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
65 independent certification bodies.
66 6) All users should ensure that they have the latest edition of this publication.
67 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
68 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
69 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicatio n,
70 use of, or reliance upon, this IEC Publication or any other IEC Publications.
71 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
72 for the correct application of this publication.
73 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
74 IEC shall not be held responsible for identifying any or all such patent rights.
75 IEC 63203-201-4 has been prepared by IEC technical committee 124: Wearable electronic devices and
76 technologies.
77 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
79 Full information on the voting for its approval can be found in the report on voting indicated in the above
80 table.
81 The language used for the development of this International Standard is English.
82 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in accordance
83 with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available at
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 4 124/246/CDV
84 https://www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
85 described in greater detail at https://www.iec.ch/standardsdev/publications.
86 The committee has decided that the contents of this document will remain unchanged until the stability
87 date indicated on the IEC website under webstore.iec.ch in the data related to the specific document.
88 At this date, the document will be
89 • reconfirmed,
90 • withdrawn,
91 • replaced by a revised edition, or
92 • amended.
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 5 124/246/CDV
94 INTRODUCTION
95 The electrical property can be changed by surface wear of conductive fabric so abrasion resistance is
96 a critical property for conductive fabric.
97 The failure modes of conductive fabric are specimen breakdown, appearance change and damage of
98 coated layer in case of coated fabric etc. These physical failure modes result in changes in electrical
99 property.
100 This document specifies the test method and evaluation criteria to abrasion resistance of conductive
101 fabrics.
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 6 124/246/CDV
103 WEARABLE ELECTRONIC DEVICES AND TECHNOLOGIES –
105 Part 201-4: Electronic textile –Test method for determining sheet resistance of
106 conductive fabrics after abrasion
108 1 Scope
109 This part of IEC 63203-201 specifies a test procedure to measure electrical resistance of conductive
110 fabrics after abrasion treatment using Martindale abrader.
111 This document is applicable to woven, knitted conductive fabrics, conductive nonwovens, coated
112 conductive fabrics, and embroidery fabrics using conductive yarns.
113 2 Normative references
114 The following documents are referred to in the text in such a way that some or all of their content
115 constitutes requirements of this document. For dated references, only the edition cited applies. For
116 undated references, the latest edition of the referenced document (including any amendments) applies.
117 ISO 139, Textiles – Standard atmospheres for conditioning and testing
118 ISO 12947-1:1998, Textiles – Determination of abrasion resistance of fabrics by the Martindale method
119 – Part 1: Martindale abrasion testing apparatus
120 ISO 12947-2:2016, Textiles – Determination of abrasion resistance of fabrics by the Martindale method
121 – Part 2: Determination of specimen breakdown
122 IEC 62899-202:2023 ED2, Printed Electronics – Part 202: Materials – Conductive ink
123 EN 388:2016, Protective gloves against mechanical risks
124 3 Terms and definitions
125 For the purposes of this document, the following terms and definitions apply.
126 ISO and IEC maintain terminological databases for use in standardization at the following addresses:
127 • IEC Electropedia: available at https://www.electropedia.org/
128 • ISO Online browsing platform: available at https://www.iso.org/obp
130 3.1
131 abrasion rub
132 one revolution of the outer drives of the Martindale abrasion tester
133 [SOURCE: ISO 12947-1:1998, 3.1]
134 3.2
135 sheet resistance
136 R
S
137 electrical resistance of a sheet of nominally uniform thickness, measured across the opposite ends of a
138 square area.
139 Note 1 to entry: The unit of sheet resistance is Ohm (Ω). However, in order not to confuse sheet resistance with bulk resistance,
140 the use of Ohm per square (Ω/□) is recommended.
141 Note 2 to entry: If fabric thickness is known, the average bulk resistivity of the fabric material can be calculated as the product
142 of sheet resistance and fabric thickness.
oSIST prEN IEC 63203-201-4:2024
IEC CDV 63203-201-4 © IEC 2023 7 124/246/CDV
143 Note 3 to entry: In a conductive fabric whose resistance value can be regarded as isotropic, the fabric can be regarded as a
144 sheet and the sheet resistance can be used as an expression of conductivity.
145 [SOURCE: IEC 62899-101:2019, 3.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.