iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 63203-201-2:2022/AC:2024

(Corrigendum)

Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials (IEC 63203-201-2:2022/COR1:2023)

Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials (IEC 63203-201-2:2022/COR1:2023)

Tragbare elektronische Geräte und Technologien - Teil 201-2: Elektronische Textilien - Messverfahren für die grundlegenden Eigenschaften von leitfähigen Textilien und Isolationswerkstoffen (IEC 63203-201-2:2022/COR1:2023)

Technologies et dispositifs électroniques prêts-à-porter - Partie 201-2: Textile électronique - Méthodes de mesure des propriétés fondamentales des étoffes conductrices et des matériaux isolants (IEC 63203-201-2:2022/COR1:2023)

Nosljive elektronske naprave in tehnologije - 201-2. del: Elektronski tekstil - Metode merjenja osnovnih lastnosti prevodnih tkanin in izolacijskih materialov - Popravek AC (IEC 63203-201-2:2022/COR1:2023)

General Information

Status
Published
Publication Date
18-Mar-2024
ICS
59.080.30 - Textile fabrics
59.080.80 - Smart textiles
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Dec-2023
Due Date
19-Feb-2024
Completion Date
19-Mar-2024
Ref Project
EN IEC 63203-201-2:2022/AC:2023-12 - Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials

Relations

Corrects
SIST EN IEC 63203-201-2:2022 - Wearable electronic devices and technologies - Part 201-2: Electronic textile - Measurement methods for basic properties of conductive fabrics and insulation materials (IEC 63203-201-2:2022)
Effective Date
05-Dec-2023

Buy Standard

EN IEC 63203-201-2:2022/AC:2024EN IEC 63203-201-2:2022/AC:2024
PreviousNext
Corrigendum
EN IEC 63203-201-2:2022/AC:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 63203-201-2:2022/AC:2024
01-maj-2024
Nosljive elektronske naprave in tehnologije - 201-2. del: Elektronski tekstil -
Metode merjenja osnovnih lastnosti prevodnih tkanin in izolacijskih materialov -
Popravek AC (IEC 63203-201-2:2022/COR1:2023)
Wearable electronic devices and technologies - Part 201-2: Electronic textile -
Measurement methods for basic properties of conductive fabrics and insulation materials
(IEC 63203-201-2:2022/COR1:2023)
Tragbare elektronische Geräte und Technologien - Teil 201-2: Elektronische Textilien -
Messverfahren für die grundlegenden Eigenschaften von leitfähigen Textilien und
Isolationswerkstoffen (IEC 63203-201-2:2022/COR1:2023)
Technologies et dispositifs électroniques prêts-à-porter - Partie 201-2: Textile
électronique - Méthodes de mesure des propriétés fondamentales des étoffes
conductrices et des matériaux isolants (IEC 63203-201-2:2022/COR1:2023)
Ta slovenski standard je istoveten z: EN IEC 63203-201-2:2022/AC:2023-12
ICS:
59.080.80 Inteligentne tekstilije Smart textiles
SIST EN IEC 63203-201-2:2022/AC:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 63203-201-2:2022/AC:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 63203-201-2:2022/AC:2024


EUROPEAN STANDARD EN IEC 63203-201-
2:2022/AC:2023-12
NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2023

ICS 59.080.80; 59.080.30
English Version
Wearable electronic devices and technologies - Part 201-2:
Electronic textile - Measurement methods for basic properties of
conductive fabrics and insulation materials
(IEC 63203-201-2:2022/COR1:2023)
Technologies et dispositifs électroniques prêts-à-porter - Tragbare elektronische Geräte und Technologien - Teil 201-
Partie 201-2: Textile électronique - Méthodes de mesure 2: Elektronische Textilien - Messverfahren für die
des propriétés fondamentales des étoffes conductrices et grundlegenden Eigenschaften von leitfähigen Textilien und
des matériaux isolants Isolationswerkstoffen
(IEC 63203-201-2:2022/COR1:2023) (IEC 63203-201-2:2022/COR1:2023)
This corrigendum becomes effective on 8 December 2023 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 63203-201-2:2022/AC:2023-12 E

---------------------- Page: 3 ----------------------
SIST EN IEC 63203-201-2:2022/AC:2024

EN IEC 63203-201-2:2022/AC:2023-12



Endorsement notice

The text of the corrigendum IEC 63203-201-2:2022/COR1:2023 was approved by CENELEC as EN IEC 63203-201-2:2022/AC:2023-12
without any modification.

---------------------- Page: 4 ----------------------
SIST EN IEC 63203-201-2:2022/AC:2024
IEC 63203-201-2:2022/COR1:2023 – 1 –
 IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________

IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15328:2020+A1:2024(Main + Amendment)
Railway applications - Braking - Brake pads
EN 15328:2020+A1:2024

This document specifies requirements for pads for disc brakes of railway rolling stock.
The document defines requirements and generic test programs for brake pads on dynamometer. This document does not cover mandatory tests to verify stopping distances in addition to laboratory, bench test and in-service tests. In order to qualify the brake pad performance in accordance with the classification the standard provides fixed parameter figures as categories defined in paragraph classification scheme.
This document is not applicable for urban rail applications.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17651-2:2024(Main)
Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for mobile booths (ISO 17651-2:2024)
EN ISO 17651-2:2024

This document specifies requirements and recommendations for the design, use and siting of mobile booths for simultaneous interpreting. The main features of mobile booths that distinguish them from permanent booths are that they can be dismantled, moved and set up in a room. This document also ensures the usability and accessibility of booths for all interpreters.
This document is to be used in conjunction with ISO 20109, which contains requirements and recommendations for the equipment necessary for simultaneous interpreting. For requirements and recommendations for mobile booths which do not have a direct view of a room, see ISO 17651-3.[1]
[1]  Under preparation. Stage at the time of publication: ISO/CD 17651-3.2:2024.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17929:2024(Main)
Hyperloop Transport Services
EN 17929:2024

Hyperloop transport services are designed to support passenger transport and cargo transport. For each of the transport service user/customer requirements and expectations are different.
This document defines the hyperloop transport services supported by a hyperloop system and provides means for characterization and description of these services. The characterization considers the technical as well as operational / commercial features of each transport service.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12185:2024(Main)
Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor (ISO 12185:2024)
EN ISO 12185:2024

This document specifies a method for the determination, using an oscillating U-tube density meter, of the density of crude petroleum and related products within the range 600 kg/m3 to 1 100 kg/m3, which can be handled as single-phase liquids at the test temperature and pressure.
This document is applicable to liquids of any vapour pressure as long as suitable precautions are taken to ensure that they remain in single phase. Loss of light components leads to changes in density during both the sample handling and the density determination.
This method is not intended for use with in-line density meters.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14972-4:2024(Main)
Fixed firefighting systems - Water mist systems - Part 4: Test protocol for non-storage occupancies for automatic nozzle systems
EN 14972-4:2024

This document specifies the evaluation of the fire performance of water mist systems for lightly loaded non-storage and non-manufacturing occupancies with ordinary combustibles, such as offices, schools, hospitals and hotels.
This document is applicable to ceiling mounted and sidewall automatic nozzles to be used in restricted and/or unlimited areas.
This document is applicable for horizontal, solid, flat ceilings with heights of 2 m and above, up to the maximum tested ceiling height.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16451:2024(Main)
Railway applications - Braking - Brake pad holder
EN 16451:2024

The document is applicable to the brake pad holders with which the rail vehicles of main-line railways, regional and suburban railways are fitted. Brake pad holders pursuant to this document are to be made from ferrous materials e.g. cast iron, cast steel or forged steel. Brake pad holders made of non-ferrous materials are not subject of this document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 589:2024(Main)
Automotive fuels - LPG - Requirements and test methods
EN 589:2024

This document specifies requirements and test methods for marketed and delivered automotive liquefied petroleum gas (LPG), with LPG defined as low pressure liquefied gas composed of one or more light hydrocarbons which are assigned to UN 1011, 1075, 1965, 1969 or 1978 only and which consists mainly of propane, propene, butane, butane isomers, butenes with traces of other hydrocarbon gases.
This standard is applicable to automotive LPG for use in LPG engine vehicles designed to run on automotive LPG.
NOTE   For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction, µ, and the volume fraction, φ.
WARNING - Attention is drawn to the risk of fire and explosion when handling LPG and to the hazard to health arising through inhalation of excessive amounts of LPG.
LPG is a highly volatile hydrocarbon liquid which is normally stored under pressure. If the pressure is released large volumes of gas will be produced which form flammable mixtures with air over the range of approximately 2 % (V/V) to 10 % (V/V). This European Standard involves the sampling, handling and testing of LPG. Naked flames, unprotected electrical equipment electrostatic hazards etc. are sources of ignition for LPG.
LPG in liquid form can cause cold burns to the skin. The national health and safety regulations apply.
LPG is heavier than air and accumulates in cavities. There is a danger of suffocation when inhaling high concentrations of LPG.
CAUTION - One of the tests described in this European Standard involves the operator inhaling a mixture of air and LPG vapour. Particular attention is drawn to the cautionary statement provided in A.1, where this method is referred to.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5832-1:2024(Main)
Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2024)
EN ISO 5832-1:2024

ISO 5832-1:2016 specifies the characteristics of, and corresponding test methods for, wrought stainless steel for use in the manufacture of surgical implants.
NOTE 1 The mechanical properties of a sample obtained from a finished product made of this alloy can differ from those specified in this part of ISO 5832.
NOTE 2 The alloy described in this part of ISO 5832 corresponds to UNS S31673 referred to in ASTM F138/ASTM F139 and to alloy code 1.4441 given in the withdrawn DIN 17443.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61970-457:2024(Main)
Energy management system application program interface (EMS-API) - Part 457: Dynamics profile (IEC 61970-457:2024)
EN IEC 61970-457:2024

IEC 61970-457:2024 specifies a standard interface for exchanging dynamic model information needed to support the analysis of the steady state stability (small-signal stability) and/or transient stability of a power system or parts of it. The schema(s) for expressing the dynamic model information are derived directly from the CIM, more specifically from IEC 61970-302.
The scope of this document includes only the dynamic model information that needs to be exchanged as part of a dynamic study, namely the type, description and parameters of each control equipment associated with a piece of power system equipment included in the steady state solution of a complete power system network model. Therefore, this profile is dependent upon other standard profiles for the equipment as specified in IEC 61970-452: CIM static transmission network model profiles, the topology, the steady state hypothesis and the steady state solution (as specified in IEC 61970-456: Solved power system state profiles) of the power system, which bounds the scope of the exchange. The profile information described by this document needs to be exchanged in conjunction with IEC 61970-452 and IEC 61970-456 profiles’ information to support the data requirements of transient analysis tools. IEC 61970-456 provides a detailed description of how different profile standards can be combined to form various types of power system network model exchanges.
This document supports the exchange of the following types of dynamic models:
• standard models: a simplified approach to exchange, where models are contained in predefined libraries of classes interconnected in a standard manner that represent dynamic behaviour of elements of the power system. The exchange only indicates the name of the model along with the attributes needed to describe its behaviour.
• proprietary user-defined models: an exchange that would provide users the ability to exchange the parameters of a model representing a vendor or user proprietary device where an explicit description of the model is not described in this document. The connections between the proprietary models and standard models are the same as described for the standard models exchange. Recipient of the data exchange will need to contact the sender for the behavioural details of the model.
This document builds on IEC 61970-302, CIM for dynamics which defines the descriptions of the standard dynamic models, their function block diagrams, and how they are interconnected and associated with the static network model. This type of model information is assumed to be pre-stored by all software applications hence it is not necessary to be exchanged in real-time or as part of a dynamics model exchange.
This second edition cancels and replaces the first edition published in 2021. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The majority of issues detected in IEC 61970-302:2018 and fixed in IEC 61970-302:2022 led to update of this document;
b) IEEE 421.5-2016 on Excitation systems is fully covered;
c) IEEE turbine report from 2013 was considered and as a result a number of gas, steam and hydro turbines/governors are added;
d) IEC 61400-27-1:2020 on wind turbines is fully incorporated;
e) WECC Inverter-Based Resource (IBR) models, Hybrid STATCOM models and storage models are added;
f) The user defined models approach was enhanced in IEC 61970-302:2022 adding a model which enables modelling of a detailed dynamic model. This results in the creation of two additional pr

  • Standard
    780 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 22935-3:2024(Main)
Milk and milk products — Sensory analysis — Part 3: Method for evaluation of compliance with product specifications for sensory properties by scoring (ISO 22935-3:2023)
ISO 22935-3:2023

ISO 22935-3¦IDF 99-3 gives guidance on a general method for evaluation of compliance with product specifications for sensory properties based on sensory scoring and the use of a common nomenclature of terms.
The method is especially applicable in process and quality control performed regularly on a larger number of samples and/or with some time pressure and/or with a limited number of expert assessors available.
The results from the method may be part of product classification systems for domestic and international trade. Classification systems are not covered by ISO 22935-3¦IDF 99-3.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day