oSIST prEN 12326-2:2024

Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods

This document specifies test methods for slate, carbonate slate, schist and schistose stone for discontinuous roofing and external cladding, as defined in 3.1, 3.2, and 3.3 of EN 12326-1:2014 and 3.1 of prEN 12326-3:2021, used for assembly into discontinuous roofs and external wall cladding. In this sense, when the test describes a slate, it could also be considered as carbonate slate.

Schiefer und Naturstein für überlappende Dachdeckungen und Außenwandbekleidungen - Teil 2: Prüfverfahren für Schiefer und carbonathaltige Schiefer

Ardoises et pierres pour toiture et bardage extérieur pour pose en discontinu - Partie 2 : Méthodes d'essai

Le présent document spécifie les méthodes d’essai pour les ardoises, les ardoises carbonatées, les schistes et les pierres schisteuses pour toiture et bardage extérieur pour pose en discontinu, comme défini en 3.1, 3.2 et 3.3 de l’EN 12326 1:2014 et en 3.1 de la prEN 12326 3:2021, utilisés pour la couverture et le bardage extérieur en discontinu des bâtiments. En ce sens, lorsque l’essai décrit une ardoise, elle peut également être considérée comme une ardoise carbonatée.

Skrilavec in izdelki iz naravnega kamna za polaganje streh in zidov - 2. del: Preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 07-May-2024
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: IKER - Ceramics
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 21-Feb-2024
• Due Date: 10-Jul-2024
• Completion Date: 08-May-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/BC/CEN/87/13 - Standardization request in the field of Construction products - pitched roofing products
• Ref Project: prEN 12326-2 - Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods

Relations

• Revises: SIST EN 12326-2:2011 - Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
• Effective Date: 29-Mar-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12326-2:2024
01-april-2024
Skrilavec in izdelki iz naravnega kamna za polaganje streh in zidov - 2. del:
Preskusne metode
Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods
Schiefer und Naturstein für überlappende Dachdeckungen und Außenwandbekleidungen
- Teil 2: Prüfverfahren für Schiefer und carbonathaltige Schiefer
Ardoises et pierres pour toiture et bardage extérieur pour pose en discontinu - Partie 2 :
Méthodes d'essai
Ta slovenski standard je istoveten z: prEN 12326-2
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
oSIST prEN 12326-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12326-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN 12326-2:2024


DRAFT
EUROPEAN STANDARD
prEN 12326-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 91.100.15 Will supersede EN 12326-2:2011
English Version

Slate and stone for discontinuous roofing and external
cladding - Part 2: Test methods
Ardoises et pierres pour toiture et bardage extérieur Schiefer und Naturstein für überlappende
pour pose en discontinu - Partie 2 : Méthodes d'essai Dachdeckungen und Außenwandbekleidungen - Teil 2:
Prüfverfahren für Schiefer und carbonathaltige
Schiefer
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 128.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12326-2:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12326-2:2024
prEN 12326-2:2024 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 6
4 Number of slates required for testing . 9
5 Determination of the length (l) and width (b) and the deviation from the specified length
and width . 10
5.1 Principle . 10
5.2 Apparatus .
...