iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 12326-2

(Main)

Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods

Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods

This document specifies test methods for slate, carbonate slate, schist and schistose stone for discontinuous roofing and external cladding, as defined in 3.1, 3.2, and 3.3 of EN 12326-1:2014 and 3.1 of prEN 12326-3:2021, used for assembly into discontinuous roofs and external wall cladding. In this sense, when the test describes a slate, it could also be considered as carbonate slate.

Schiefer und Naturstein für überlappende Dachdeckungen und Außenwandbekleidungen - Teil 2: Prüfverfahren für Schiefer und carbonathaltige Schiefer

Ardoises et pierres pour toiture et bardage extérieur pour pose en discontinu - Partie 2 : Méthodes d'essai

Le présent document spécifie les méthodes d’essai pour les ardoises, les ardoises carbonatées, les schistes et les pierres schisteuses pour toiture et bardage extérieur pour pose en discontinu, comme défini en 3.1, 3.2 et 3.3 de l’EN 12326 1:2014 et en 3.1 de la prEN 12326 3:2021, utilisés pour la couverture et le bardage extérieur en discontinu des bâtiments. En ce sens, lorsque l’essai décrit une ardoise, elle peut également être considérée comme une ardoise carbonatée.

Skrilavec in izdelki iz naravnega kamna za polaganje streh in zidov - 2. del: Preskusne metode

General Information

Status
Not Published
Publication Date
06-Jul-2025
ICS
91.100.15 - Mineral materials and products
Technical Committee
CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
Drafting Committee
CEN/TC 128/SC 8 - Slate and stone products for roofing
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
15-Feb-2024
Due Date
19-Feb-2024
Completion Date
15-Feb-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/BC/CEN/87/13 - Standardization request in the field of Construction products - pitched roofing products
Ref Project
oSIST prEN 12326-2:2024 - Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods

Relations

Revises
EN 12326-2:2011 - Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
Effective Date
29-Mar-2023

Buy Standard

prEN 12326-2:2024 - BARVEprEN 12326-2:2024 - BARVE
PreviousNext
Draft
prEN 12326-2:2024 - BARVE
English language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12326-2:2024
01-april-2024
Skrilavec in izdelki iz naravnega kamna za polaganje streh in zidov - 2. del:
Preskusne metode
Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods
Schiefer und Naturstein für überlappende Dachdeckungen und Außenwandbekleidungen
- Teil 2: Prüfverfahren für Schiefer und carbonathaltige Schiefer
Ardoises et pierres pour toiture et bardage extérieur pour pose en discontinu - Partie 2 :
Méthodes d'essai
Ta slovenski standard je istoveten z: prEN 12326-2
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
oSIST prEN 12326-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12326-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN 12326-2:2024


DRAFT
EUROPEAN STANDARD
prEN 12326-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 91.100.15 Will supersede EN 12326-2:2011
English Version

Slate and stone for discontinuous roofing and external
cladding - Part 2: Test methods
Ardoises et pierres pour toiture et bardage extérieur Schiefer und Naturstein für überlappende
pour pose en discontinu - Partie 2 : Méthodes d'essai Dachdeckungen und Außenwandbekleidungen - Teil 2:
Prüfverfahren für Schiefer und carbonathaltige
Schiefer
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 128.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12326-2:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12326-2:2024
prEN 12326-2:2024 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 6
4 Number of slates required for testing . 9
5 Determination of the length (l) and width (b) and the deviation from the specified length
and width . 10
5.1 Principle . 10
5.2 Apparatus .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12326-1:2014(Main)
Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate
SIST EN 12326-1:2014

This European Standard specifies requirements for slate and carbonate slate for discontinuous roofing and external cladding, as defined in 3.1, and 3.2, used for assembly into discontinuous roofing and external cladding.
For the purposes of this European Standard, slates and carbonate slates have been classified.
This European Standard does not apply to products for roofing or external cladding made from the following:
a)   stone other than those defined in 3.1 and 3.2;
b)   concrete;
c)   polymeric materials;
d)   fibre reinforced cement;
e)   metal;
f)   clay.
This European Standard is not applicable to roofing and cladding slates used internally.
This European Standard is not applicable to bonded cladding (cladding fixed with adhesives) and cladding fixed with dowels and cramps.
NOTE 1   Requirements for internal wall lining slate are specified in EN 1469.
This document does not include requirements for appearance.
NOTE 2   Some general guidance for appearance is given in Annex A.
This European Standard does not include installation rules for slates.
NOTE 3   References to national recommendations on methods of construction for slate roofs are given in Annex C.
NOTE 4   Where the term "slate" is used in this document it means slate and carbonate slate unless otherwise indicated.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12326-2:2011(Main)
Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
SIST EN 12326-2:2011

This European Standard specifies test methods for slate and carbonate slate for roofing and wall cladding. It is applicable to natural roofing products as defined in EN 12326-1 used for assembly into discontinuous roofs and external wall cladding.
NOTE   Where the term "slate" is used in this document it means slate and carbonate slate unless otherwise indicated.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12326-3(Main)
Schist and schistose stone types for discontinuous roofing - Requirements and test methods.
oSIST prEN 12326-3:2021

This European standard specifies the performance requirements and corresponding test methods for roofing slate products of schist and schistose stone types as defined in 3.2 and 3.3 and uses for assembly into discontinuous roofing.
This European standard provides also for the evaluation of conformity and for marking of the roofing slate products.
This European standard covers als characteristics that are of importance to the trade.
This European standard does not cover roofing slate and carboante slate, for mhich EN 12326-1 and EN 12326-2 applies. It does not cover treated roofing slates, for which prEN 12326-4 applies.
This European Standard is not apllicable to bonded cladding (cladding fixed with adhesives) and cladding fixed with dowels and cramps. In these cases EN 1469 applies.
The performance of a roof or wall constructed with these products depends not only on the properties of the product as required by this document, but also on the design, construction and performance of the roof or wall as a whole in relation to the environment and conditions in use. This standard does not cover installation or construction specific requirements.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-1:2023(Main)
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
SIST EN 1097-1:2024

This document specifies the reference method used for type testing and in case of dispute, for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A) by abrasion in the micro-Deval apparatus. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the relevant reference method has been established.
This document applies to natural, manufactured, recycled or lightweight (LWA) aggregates.
NOTE   This document does not apply to all types of LWA.
The reference test is performed with the addition of water. Annex B gives details of how the test can be performed without the addition of water.
Annex A specifies the method to determine the resistance to wear of aggregates for railway ballast without abrasive charge.
Annex C specifies the test performed with alternative narrow size fractions.
Annexes D and E specify methods for determining the wear of fine aggregates.
Precision data for the reference test method are given in Annex F.
Annex A is normative and Annexes B, C, D, E and F are informative.
WARNING – The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of this document, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-6:2022(Main)
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
SIST EN 933-6:2023

This document specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. It does not apply to lightweight aggregates.
NOTE 1   For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with the percentage of crushed or broken surfaces of an aggregate and can therefore be used in association with the method specified in EN 933-5. Shape and surface texture characteristics also influence the result.
NOTE 2   Experience of this test has been generally limited to natural aggregates.
Examples of test data sheets are given in informative Annexes A and C.
Annex B (informative) contains precision data.
WARNING - The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1468:2022(Main)
Natural stone - Rough slabs - Requirements
SIST EN 1468:2022

This document specifies requirements for rough slabs of natural stone from which products for use in buildings or commemorative stones and other similar applications are made.
It does not cover artificially agglomerated stony material nor installation.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-5:2022(Main)
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
SIST EN 933-5:2023

This document specifies the reference method, used for type testing and in case of dispute, for the determination of the percentages of crushed particles, totally crushed particles and totally rounded particles in coarse and all-in natural aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established.
NOTE 1   Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregates comprising particles within size fraction 4/63 mm. It does not apply to lightweight aggregates.
NOTE 2   For coarse aggregate between 4 mm and 20 mm the percentages of crushed surfaces are linked to the flow coefficient and can therefore be used in association with the test method specified in EN 933 6.
Clause 7.1 specifies the procedure for test portions consisting of one size fraction and Clause 7.2 specifies the procedure for test portions consisting of two or more size fractions.
Guidance for the estimated mass of various size fractions with about 100 particles is given in informative Annex A.
Examples of application of the test procedure and an example of a test data sheet are given in informative Annexes B and C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1467:2022(Main)
Natural stone - Rough blocks - Requirements
SIST EN 1467:2022

This document specifies requirements for rough blocks of natural stone from which products for use in building or commemorative stones and other similar applications are made.
It does not apply to artificially agglomerated stony material nor installation.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-7:2022(Main)
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
SIST EN 1097-7:2023

This document specifies the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. For other purposes, in particular factory production control, other methods can be used provided that an appropriate working relationship with the reference method has been established.
NOTE   Methods for determination of particle density of aggregates are specified in EN 1097 6.
Annex A specifies the procedure for determination of the pyknometer volume. Annex B specifies the procedure for determination of the density of the liquid used to determine the particle density of the filler. Annexes A and B are normative.
WARNING — The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as liquids, dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16306:2022(Main)
Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
SIST EN 16306:2022

This document specifies a laboratory method for determining the resistance to thermal and moisture cycling of marble intended for the external cladding of building facades.
NOTE Bowing and rapid strength loss is known to occur in some marbles when used as exterior cladding.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day