SIST EN 60512-8-2:2011

Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification.
The object of this standard is to detail a standard test method to determine the ability of a fixed connector to withstand a steady axial force which might occur during normal use.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 8-2: Prüfungen mit statischer Last (feste Steckverbinder) - Prüfung 8b: Statische Axiallast

Connecteurs pour équipements électroniques - Essais et mesures - Partie 8-2: Essais de charge statique (embases) - Essai 8b: Charge statique axiale

La CEI 60512-8-2:2011 lorsque la spécification particulière l'exige, est utilisée pour les essais des connecteurs qui entrent dans le domaine d'application du comité d'études 48 de la CEI. Ces essais peuvent aussi être utilisés sur des composants similaires lorsqu'une spécification particulière le prescrit. L'objet du présent norme est de définir une méthode d'essai normalisée pour évaluer l'aptitude d'une embase à supporter une force axiale constante qui pourrait se produire pendant l'usage normal. La présente norme annule et remplace l'Essai 8b de la CEI 60512-5, publiée en 1992. Elle constitue une révision technique.   Cette publication doit être lue conjointement avec la CEI 60512-1:2001 et la CEI 60512-1-100:2006.

Konektorji za elektronsko opremo - Preskusi in meritve - 8-2. del: Preskušanje na statične obremenitve (fiksni konektorji) - Preskus 8b: Statična osna obremenitev

Ta del IEC 60512 se, kadar ga zahteva podrobna specifikacija, uporablja za preskušanje konektorjev v okviru tehničnega odbora 48 IEC. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija.
Cilj tega standarda je podrobno opisati standardno preskusno metodo za določanje zmožnosti fiksnega konektorja, da vzdrži stalno osno silo, do katere lahko pride med normalno uporabo.

General Information

• Status: Published
• Publication Date: 26-Jul-2011
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jul-2011
• Due Date: 17-Sep-2011
• Completion Date: 27-Jul-2011
• Ref Project: EN 60512-8-2:2011 - Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 8-2: Prüfungen mit statischer Last (feste Steckverbinder) - Prüfung 8b: Statische AxiallastD[LDOHConnectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 60512-8-2:2011SIST EN 60512-8-2:2011en01-september-2011SIST EN 60512-8-2:2011SLOVENSKI
STANDARD



SIST EN 60512-8-2:2011



EUROPEAN STANDARD EN 60512-8-2 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-8-2:2011 E
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 8-2: Static load tests (fixed connectors) -
Test 8b: Static load, axial (IEC 60512-8-2:2011)
Connecteurs pour équipements électroniques -
Essais et mesures -
Partie 8-2: Essais de charge statique (embases) -
Essai 8b: Charge statique axiale (CEI 60512-8-2:2011)
Steckverbinder für elektronische Einrichtungen -
Mess- und Prüfverfahren -
Teil 8-2: Prüfungen mit statischer Last (feste Steckverbinder) -
Prüfung 8b: Statische Axiallast (IEC 60512-8-2:2011)
This European Standard was approved by CENELEC on 2011-05-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60512-8-2:2011



EN 60512-8-2:2011 - 2 - Foreword The text of document 48B/2120/CDV, future edition 1 of IEC 60512-8-2, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-8-2 on 2011-05-12. This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100, which explains the structure of the EN 60512 series. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2012-02-12 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2014-05-12 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60512-8-2:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60512-14 series NOTE
Harmonized in EN 60512-14 series (not modified) IEC 60529 NOTE
Harmonized as EN 60529. __________ SIST EN 60512-8-2:2011



- 3 - EN 60512-8-2:2011 Annex ZA
(normative) Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60512-1 - Connectors for electronic equipment - Tests and measurements -
Part 1: General EN 60512-1 -
IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements -
Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 -
IEC 60512-1-100 - Connectors for electronic equipment - Tests and measurements -
Part 1-100: General - Applicable publications EN 60512-1-100 -
SIST EN 60512-8-2:2011



SIST EN 60512-8-2:2011



IEC 60512-8-2 Edition 1.0 2011-04
INTERNATIONAL STANDARD NORME INTERNATIONALE Connectors for electronic equipment – Tests and measurements – Part 8-2: Static load tests (fixed connectors) – Test 8b: Static load, axial
Connecteurs pour équipements électroniques – Essais et mesures – Partie 8-2: Essais de charge statique (embases) – Essai 8b: Charge statique axiale
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE G ICS 31.220.01 PRICE CODE CODE PRIX ISBN 978-2-88912-444-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
SIST EN 60512-8-2:2011



– 2 – 60512-8-2  IEC:2011 CONTENTS FOREWORD . 3 1 Scope and object . 5 2 Normative references . 5 3 Preparation . 5
Preparation of the specimen . 5 3.1 Equipment . 5 3.2 Mounting . 5 3.34 Test method . 6 5 Final measurements . 6 6 Requirements . 6 7 Details to be specified . 6 Bibliography . 7
SIST EN 60512-8-2:2011



60512-8-2  IEC:2011 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 8-2: Static load tests (fixed connectors) –
Test 8b: Static load, axial
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization fo
...