SIST EN 13480-1:2002/A1:2005

Metallic industrial piping - Part 1: General

Maintenance procedure

Metallische industrielle Rohrleitungen - Teil 1: Allgemeines

Tuyauteries industrielles métalliques - Partie 1: Généralités

Kovinski industrijski cevovodi – 1. del: Splošno

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2005
• Withdrawal Date: 07-Oct-2012
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Sep-2012
• Due Date: 17-Oct-2012
• Completion Date: 08-Oct-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13480-1:2002/A1:2005 - Metallic industrial piping - Part 1: General

Relations

• Replaced By: SIST EN 13480-1:2012 - Metallic industrial piping - Part 1: General
• Effective Date: 08-Jun-2022
• Amends: SIST EN 13480-1:2002 - Metallic industrial piping - Part 1: General
• Effective Date: 01-Nov-2005
• Replaced By: SIST EN 13480-1:2012 - Metallic industrial piping - Part 1: General
• Effective Date: 01-Oct-2012
• Amends: SIST EN 13480-1:2002 - Metallic industrial piping - Part 1: General
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-1:2002/A1:2005
01-november-2005
Kovinski industrijski cevovodi – 1. del: Splošno
Metallic industrial piping - Part 1: General
Metallische industrielle Rohrleitungen - Teil 1: Allgemeines
Tuyauteries industrielles métalliques - Partie 1: Généralités
Ta slovenski standard je istoveten z: EN 13480-1:2002/A1:2005
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-1:2002/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-1:2002/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 13480-1:2002/A1:2005
EUROPEAN STANDARD
EN 13480-1:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 23.040.01
English version
Metallic industrial piping - Part 1: General
Tuyauteries industrielles métalliques - Partie 1: Généralités Metallische industrielle Rohrleitungen - Teil 1: Allgemeines
This amendment A1 modifies the European Standard EN 13480-1:2002; it was approved by CEN on 12 May 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-1:2002/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-1:2002/A1:2005
EN 13480-1:2002/A1:2005 (E)
Content
Page
Foreword .3
1 Modification to the Foreword .4
2 Addition of Annex A (Informative) .4
2

---------------------- Page: 4 ----------------------

SIST EN 13480-1:2002/A1:2005
EN 13480-1:2002/A1:2005 (E)
Foreword
This document (EN 13480-1:2002/A1:2005) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 13480-1:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting
national standards shall be withdrawn at the latest by December 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of the standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 13480-1:2002/A1:2005
EN 13480-1:2002/A1:2005 (E)
1 Modification to the Foreword
Add at the end of the Foreword in EN 13480-1:
This European Standard will be maintained by a Maintenance working group whose scope of working is
limited to corrections and interpretations related to EN 13480. The contact to submit queries can be found at
http://comelec.afnor.fr/cen/en13480. Detailed scope of working for this Maintenance working group is given in
informative Annex A.

2 Addition of Annex A (Informative)
Add the following Annex A to EN 13480-1.
4

---------------------- Page: 6 ----------------------

SIST EN 13480-1:2002/A1:2005
EN 13480-1:2002/A1:200
...