SIST EN 13480-1:2002
(Main)Metallic industrial piping - Part 1: General
Metallic industrial piping - Part 1: General
1.1 The purpose of EN 13480 is to define the requirements for design, manufacture, installation, testing and inspection of industrial piping systems and supports, including safety systems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation. 1.2 EN 13480 is applicable to metallic piping above ground, ducted or buried, independent of pressure.
Metallische industrielle Rohrleitungen - Teil 1: Allgemeines
1.1 Zweck dieser EN 13480 ist die Festlegung von Anforderungen an Konstruktion, Herstellung, Verlegung und Prüfung industrieller Rohrleitungen einschließlich Sicherheitseinrichtungen, aus metallenen Werkstoffen (aber zunächst auf Stähle beschränkt), für sichere Betriebsbedingungen. 1.2 Die vorliegende Norm gilt für oberirdische oder in Kanäle verlegte oder erdgedeckte Rohrleitungen aus metallenen Werkstoffen unabhängig vom Druck.
Tuyauteries industrielles métalliques - Partie 1: Généralités
1.1 L'objectif de EN 13480 est de définir les exigences relatives a la conception, la fabrication, l'installation, le contrôle et l'inspection des réseaux de tuyauteries industrielles, y compris des systemes de sécurité, réalisés a partir de matériaux métalliques (mais pour l'instant limité aux aciers), dans le but de garantir la sécurité lors de leur utilisation. 1.2 EN 13480 est applicable aux tuyauteries métalliques aériennes, en caniveau ou enterrées, indépendamment de la pression.
Kovinski industrijski cevovodi - 1. del: Splošno
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 1. del: SplošnoMetallische industrielle Rohrleitungen - Teil 1: AllgemeinesTuyauteries industrielles métalliques - Partie 1: GénéralitésMetallic industrial piping - Part 1: General77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-1:2002SIST EN 13480-1:2002en01-november-2002SIST EN 13480-1:2002SLOVENSKI
STANDARD
SIST EN 13480-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13480-1May 2002ICS 23.040.01English versionMetallic industrial piping - Part 1: GeneralTuyauteries industrielles métalliques - Partie 1: GénéralitésMetallische industrielle Rohrleitungen - Teil 1: AllgemeinesThis European Standard was approved by CEN on 23 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13480-1:2002 ESIST EN 13480-1:2002
EN 13480-1:2002 (E)Issue 1 (2002-05)2ContentsForeword.31Scope.42Normative references.43Terms, definitions, symbols and units.53.1Terms and definitions.53.2Symbols and units.74Classification of piping.84.1General.84.2Piping of piping class 0.104.3Piping operating
0,5 bar.104.4Special cases.105Requirements for a Piping systems.10Annex ZA (informative)
Clauses of this European Standard addressing essential safety requirementsor other provisions of EU directives.11Bibliography.11SIST EN 13480-1:2002
EN 13480-1:2002 (E)Issue 1 (2002-05)3ForewordThis document (EN 13480-1:2002) has been prepared by Technical Committee CEN/TC 267 "Industrial piping andpipelines", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard EN 13480 for metallic industrial piping consists of seven interdependent and not dissociableParts which are: Part 1: General; Part 2: Materials; Part 3: Design and calculation; Part 4: Fabrication and installation; Part 5: Inspection and testing; Part 6: Additional requirements for buried piping;CEN/TR 13480-7, Guidance on the use of conformity assessment proceduresAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13480-1:2002
EN 13480-1:2002 (E)Issue 1 (2002-05)41 ScopeThis European Standard specifies the requirements for industrial piping systems and supports, including safetysystems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation.This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure.This European Standard is not applicable to: Pipelines and their accessories; Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and theirrelated specific accessories; Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1],74/150/EEC [2] and 92/61/EEC [3]; Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity; Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and inunderground storage which is intended to contain and/or control well pressure, including the piping; Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnaceexhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuumfurnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals; Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers; Pressurized pipes for the containment of transmission systems such as for electrical power and telephonecables; Permanently fixed piping for ships, rockets, aircraft and mobile offshore units; Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices; Internal piping of boilers and piping integral to pressure vessels.2 Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. For datedreferences, subsequent amendments to or revisions of any of these publications apply to this European Standard onlywhen incorporated in it by amendment or revision. For undated references the latest edition of the publication referredto applies (including amendments).EN 764-2, Pressure equipment - Part 2 : Quantities, symbols and units.EN 764-3, Pressure equipment - Part 3 : Definitions and parties involved.EN 13480-2, Metallic industrial piping - Part 2: Materials.EN 13480-3, Metallic industrial piping - Part 3: Design and calculation.EN 13480-4, Metallic industrial piping - Part 4: Fabrication and installation.EN 13480-5:2002, Metallic industrial piping - Part 5: Inspection and testing.SIST EN 13480-1:2002
EN 13480-1:2002 (E)Issue 1 (2002-05)5prEN 13480-6, Metallic industrial piping - Part 6: Additional requirements for buried piping.CEN/TR 13480-7:2002, Metallic industrial piping – Part 7: Guidance on the use of conformity assessmentprocedures.3 Terms, definitions, symbols and units3.1 Terms and definitionsFor the purposes of this European Standard, the terms and definitions given in EN 764-3 and the following apply.Specific definitions are given in the relevant Parts of this European Standard.3.1.1ambient temperaturetemperature of the surrounding atmosphere in the immediate vicinity of the piping system3.1.2piping systempipingpipe or system of pipes for the conveyance of fluids within an industrial siteNOTE 1A piping system can be regarded as one single system provided it conveys substances having the same propertiesand it is as a whole designed for the same allowable pressure.NOTE 2Interruption by different components such as pumps, machines, vessels etc. does not preclude the integration toone single piping.3.1.3fluidgases, liquids and vapours in pure phase as well as mixtures thereofNOTE: A fluid may contain a suspension of solids.3.1.4manufacturerperson or organization that takes full responsibility for the design and manufacture of the piping system and itsconformity to EN 13480NOTE 1 The manufacturer is responsible for carrying out all relevant production processes and testing as specified in theapplicable standards.NOTE 2If a manufacturer employs subcontractors or fabricators/installers for certain items he is responsible for their work.NOTE 3In the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.