Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)

This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use
in electronic equipment.
It establishes standard terms, inspection procedures and methods of test for use in sectional
and detail specifications of electronic components for quality assessment or any other
purpose.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation

Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique (IEC 60384-1:2016)

L'IEC 60384-1:2016 est une spécification générique qui s'applique aux condensateurs fixes utilisés dans les équipements électroniques. Elle établit des définitions, des procédures de contrôle et des méthodes d'essai normalisées à utiliser dans les spécifications intermédiaires et particulières des composants électroniques, pour les systèmes d'assurance de la qualité ou pour tout autre usage. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - INTRODUCTION ajoutée; - 4.41 Essai sur le développement des trichites ajouté; - Annexe Q entièrement restructurée.

Nespremenljivi kondenzatorji za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60384-1:2016)

Ta del standarda EN 60384 je splošna specifikacija in se uporablja za nespremenljive kondenzatorje za uporabo v elektronski opremi.
Določa splošne pogoje, inšpekcijske postopke in preskusne metode za uporabo v sekcijskih in podrobnih specifikacijah elektronskih komponent za oceno kakovosti ali kateri koli drug namen.

General Information

Status
Published
Publication Date
19-Oct-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Oct-2016
Due Date
10-Dec-2016
Completion Date
20-Oct-2016

RELATIONS

Buy Standard

Standard
SIST EN 60384-1:2016
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nespremenljivi kondenzatorji za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60384-1:2016)Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique (IEC 60384-1:2016)Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN 60384-1:2016SIST EN 60384-1:2016en01-december-2016SIST EN 60384-1:2016SLOVENSKI

STANDARDSIST EN 60384-1:20101DGRPHãþD
SIST EN 60384-1:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60384-1
September 2016 ICS 31.060
Supersedes
EN 60384-1:2009
English Version

Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique (IEC 60384-1:2016)

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation (IEC 60384-1:2016) This European Standard was approved by CENELEC on 2016-03-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization

Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,

B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 60384-1:2016 E SIST EN 60384-1:2016

EN 60384-1:2016 2 European foreword The text of document 40/2420/FDIS, future edition 5 of IEC 60384-1, prepared by IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60384-1:2016. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-03-30 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-09-30

This document supersedes EN 60384-1:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60384-2 NOTE Harmonized as EN 60384-2. IEC 60384-3 NOTE Harmonized as EN 60384-3. IEC 60384-3-1 NOTE Harmonized as EN 60384-3-1. IEC 60384-26 NOTE Harmonized as EN 60384-26. IEC 60469:2013 NOTE Harmonized as EN 60469:2013. ISO 9000 NOTE Harmonized as EN ISO 9000.

SIST EN 60384-1:2016
EN 60384-1:2016 3
Annex ZA (normative)

Normative references to international publications with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.

Publication Year Title EN/HD Year IEC 60027 series
Letter symbols to be used in electrical technology EN 60027 series
IEC 60050 series
International Electrotechnical Vocabulary - series
IEC 60062 -
Marking codes for resistors and capacitors EN 60062 -
IEC 60063 -
Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013
Environmental testing -- Part 1: General and guidance EN 60068-1 2014
IEC 60068-2-1 2007
Environmental testing -- Part 2-1: Tests - Test A: Cold EN 60068-2-1 2007
IEC 60068-2-2 2007
Environmental testing -- Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 2007
IEC 60068-2-6 2007

Environmental testing -- Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008

IEC 60068-2-13 1983

Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure EN 60068-2-13 1999

IEC 60068-2-14 2009

Environmental testing -- Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 2009

IEC 60068-2-17 1994

Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing EN 60068-2-17 1994

IEC 60068-2-20 2008

Environmental testing -- Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 2008

IEC 60068-2-21 2006

Environmental testing -- Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 2006

IEC 60068-2-27 2008

Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 2009

IEC 60068-2-30 2005

Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 2005

IEC 60068-2-45 AMD 1 1993

Basic environmental testing procedures; part_2: tests; test_XA and guidance: immersion in cleaning solvents; amendment_1 - -

IEC 60068-2-45 1980

Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents EN 60068-2-45 1992

SIST EN 60384-1:2016
EN 60384-1:2016 4 IEC 60068-2-54 2006
Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing
of electronic components by the wetting balance method EN 60068-2-54 2006
IEC 60068-2-58 2015

Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) EN 60068-2-58 2015

IEC 60068-2-67 1995

Environmental testing -- Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components EN 60068-2-67 1996

IEC 60068-2-69 2007

Environmental testing - Part 2: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method EN 60068-2-69 2007

IEC 60068-2-78 2012

Environmental testing -- Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 2013

IEC 60068-2-82 2007

Environmental testing -- Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components EN 60068-2-82 2007

IEC 60294 -

Measurement of the dimensions of a cylindrical component with axial terminations EN 60294 -

IEC 60617 -

Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection for standard data element types and component classes - -

IEC 60695-11-5 2004

Fire hazard testing -- Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005

IEC 60717 -

Method for the determination of the space required by capacitors and resistors with unidirectional terminations EN 60717 -

IEC 61193-2 -

Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 -

IEC 61249-2-7 2002

Materials for printed boards and other interconnecting structures -- Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad EN 61249-2-7 2002

- -
+ corrigendum Sep. 2005
ISO 3 -
Preferred numbers; Series of preferred numbers - -
ISO 80000-1 -
Quantities and units -- Part 1: General EN ISO 80000-1 -
SIST EN 60384-1:2016

IEC 60384-1 Edition 5.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –

Part 1: Generic specification
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 1: Spécification générique

INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE

ICS 31.060
ISBN 978-2-8322-3153-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 60384-1:2016

– 2 – IEC 60384-1:2016  IEC 2016 CONTENTS FOREWORD ......................................................................................................................... 9 INTRODUCTION ................................................................................................................. 11 1 General ....................................................................................................................... 13 1.1 Scope ................................................................................................................. 13 1.2 Normative references .......................................................................................... 13 2 Technical data ............................................................................................................. 15 2.1 Symbols, units and abbreviated terms ................................................................. 15 2.1.1 General ....................................................................................................... 15 2.1.2 Letter symbols ............................................................................................. 15 2.1.3 Abbreviations ............................................................................................... 16 2.2 Terms and definitions .......................................................................................... 16 2.3 Preferred values and additional technical requirements ........................................ 21 2.3.1 General ....................................................................................................... 21 2.3.2 Preferred values of nominal capacitance ...................................................... 21 2.3.3 Preferred values of rated voltage .................................................................. 21 2.3.4 Rated a.c. load ............................................................................................ 21 2.3.5 Rated pulse load .......................................................................................... 22 2.3.6 Temperature derated voltage ........................................................................ 22 2.4 Marking ............................................................................................................... 23 2.4.1 General ....................................................................................................... 23 2.4.2 Coding ......................................................................................................... 23 3 Quality assessment procedures ................................................................................... 23 4 Tests and measurement procedures ............................................................................. 24 4.1 General ............................................................................................................... 25 4.2 Standard atmospheric conditions ......................................................................... 25 4.2.1 Standard atmospheric conditions for testing .................................................. 25 4.2.2 Recovery conditions ..................................................................................... 25 4.2.3 Referee conditions ....................................................................................... 26 4.2.4 Reference conditions ................................................................................... 26 4.3 Drying ................................................................................................................. 26 4.4 Visual examination and check of dimensions ....................................................... 26 4.4.1 Visual examination ....................................................................................... 26 4.4.2 Dimensions (gauging) .................................................................................. 26 4.4.3 Dimensions (detail) ...................................................................................... 26 4.5 Insulation resistance ........................................................................................... 27 4.5.1 Preconditioning ............................................................................................ 27 4.5.2 Measuring conditions ................................................................................... 27 4.5.3 Test points ................................................................................................... 27 4.5.4 Test methods ............................................................................................... 27 4.5.5 Temperature compensation .......................................................................... 28 4.5.6 Conditions to be prescribed in the relevant specification ............................... 28 4.6 Voltage proof ...................................................................................................... 29 4.6.1 General ....................................................................................................... 29 4.6.2 Test circuit (for the test between terminations) .............................................. 29 4.6.3 Test ............................................................................................................. 30 4.6.4 Requirements .............................................................................................. 32 SIST EN 60384-1:2016

IEC 60384-1:2016  IEC 2016 – 3 – 4.6.5 Conditions to be prescribed in the relevant specification ............................... 32 4.7 Capacitance ........................................................................................................ 32 4.7.1 Measuring frequency and measuring voltage ................................................ 32 4.7.2 Measuring equipment ................................................................................... 33 4.7.3 Conditions to be prescribed in the relevant specification ............................... 33 4.8 Tangent of loss angle and equivalent series resistance (ESR) .............................. 33 4.8.1 Tangent of loss angle ................................................................................... 33 4.8.2 Equivalent series resistance (ESR) ............................................................... 33 4.9 Leakage current .................................................................................................. 34 4.9.1 Preconditioning ............................................................................................ 34 4.9.2 Test method ................................................................................................. 34 4.9.3 Power source ............................................................................................... 34 4.9.4 Measuring accuracy ..................................................................................... 34 4.9.5 Test circuit ................................................................................................... 34 4.9.6 Conditions to be prescribed in the relevant specification ............................... 34 4.10 Impedance .......................................................................................................... 34 4.11 Self-resonant frequency and inductance .............................................................. 35 4.11.1 Self-resonant frequency (fr) .......................................................................... 35 4.11.2 Inductance ................................................................................................... 38 4.11.3 Conditions to be prescribed in the relevant specification ............................... 38 4.12 Outer foil termination ........................................................................................... 38 4.13 Robustness of terminations ................................................................................. 39 4.13.1 General ....................................................................................................... 39 4.13.2 Test Ua1 – Tensile ....................................................................................... 39 4.13.3 Test Ub – Bending (half of the sample) ......................................................... 40 4.13.4 Test Uc – Torsion (remaining sample) .......................................................... 40 4.13.5 Test Ud – Torque ......................................................................................... 40 4.13.6 Visual examination ....................................................................................... 40 4.14 Resistance to soldering heat ............................................................................... 41 4.14.1 Preconditioning and initial measurement ....................................................... 41 4.14.2 Test procedure ............................................................................................. 41 4.14.3 Recovery ..................................................................................................... 41 4.14.4 Final inspection, measurement and requirements .......................................... 41 4.15 Solderability ........................................................................................................ 41 4.15.1 General ....................................................................................................... 41 4.15.2 Preconditioning ............................................................................................ 41 4.15.3 Test procedure ............................................................................................. 42 4.15.4 Final inspection, measurements and requirements ........................................ 42 4.16 Rapid change of temperature .............................................................................. 42 4.16.1 Initial measurement ...................................................................................... 42 4.16.2 Test procedure ............................................................................................. 42 4.16.3 Final inspection, measurements and requirements ........................................ 42 4.17 Vibration ............................................................................................................. 42 4.17.1 Initial measurement ...................................................................................... 42 4.17.2 Test procedure ............................................................................................. 43 4.17.3 Electrical test (intermediate measurement) ................................................... 43 4.17.4 Final inspection, measurements and requirements ........................................ 43 4.18 Bump (repetitive shock) ....................................................................................... 43 4.18.1 Initial measurement ...................................................................................... 43 SIST EN 60384-1:2016

– 4 – IEC 60384-1:2016  IEC 2016 4.18.2 Test procedure ............................................................................................. 43 4.18.3 Final inspection, measurements and requirements ........................................ 43 4.19 Shock ................................................................................................................. 43 4.19.1 Initial measurement ...................................................................................... 43 4.19.2 Test procedure ............................................................................................. 43 4.19.3 Final inspection, measurements and requirements ........................................ 44 4.20 Container sealing ................................................................................................ 44 4.21 Climatic sequence ............................................................................................... 44 4.21.1 General ....................................................................................................... 44 4.21.2 Initial measurements .................................................................................... 44 4.21.3 Dry heat ....................................................................................................... 44 4.21.4 Damp heat, cyclic, Test Db, first cycle .......................................................... 44 4.21.5 Cold ............................................................................................................. 44 4.21.6 Low air pressure .......................................................................................... 45 4.21.7 Damp heat, cyclic, Test Db, remaining cycles ............................................... 45 4.21.8 Final measurements ..................................................................................... 45 4.22 Damp heat, steady state ...................................................................................... 45 4.22.1 Initial measurement ...................................................................................... 45 4.22.2 Test procedure ............................................................................................. 45 4.22.3 Final inspection, measurements and requirements ........................................ 46 4.23 Endurance .......................................................................................................... 46 4.23.1 Initial measurements .................................................................................... 46 4.23.2 Test procedure ............................................................................................. 46 4.23.3 Conditions to be prescribed in the relevant specification ............................... 46 4.23.4 Test voltage ................................................................................................. 46 4.23.5 Placement in the test chamber ..................................................................... 47 4.23.6 Recovery ..................................................................................................... 47 4.23.7 Final inspection, measurements and requirements ........................................ 47 4.24 Variation of capacitance with temperature ............................................................ 48 4.24.1 Static method ............................................................................................... 48 4.24.2 Dynamic method .......................................................................................... 48 4.24.3 Methods of calculation ................................................................................. 49 4.25 Storage ............................................................................................................... 50 4.25.1 Storage at high temperature ......................................................................... 50 4.25.2 Storage at low temperature .......................................................................... 50 4.26 Surge .................................................................................................................. 51 4.26.1 Initial measurement ...................................................................................... 51 4.26.2 Test procedure ............................................................................................. 51 4.26.3 Final inspection, measurements and requirements ........................................ 52 4.26.4 Information to be given in the relevant detail specification ............................. 52 4.27 Charge and discharge tests and inrush current test .............................................. 52 4.27.1 Initial measurement ...................................................................................... 52 4.27.2 Test procedure ............................................................................................. 52 4.27.3 Charge and discharge .................................................................................. 53 4.27.4 Inrush current .............................................................................................. 54 4.27.5 Final inspection, measurements and requirements ........................................ 54 4.28 Pressure relief (for aluminium electrolytic capacitors) ........................................... 54 4.28.1 General ....................................................................................................... 54 4.28.2 AC test ........................................................................................................ 54 SIST EN 60384-1:2016

IEC 60384-1:2016  IEC 2016 – 5 – 4.28.3 DC test ........................................................................................................ 54 4.28.4 Pneumatic test ............................................................................................. 54 4.28.5 Final inspection, measurements and requirements ........................................ 54 4.29 Characteristics at high and low temperature ......................................................... 54 4.29.1 Test procedure ............................................................................................. 54 4.29.2 Requirements .............................................................................................. 55 4.30 Thermal stability test ........................................................................................... 55 4.31 Component solvent resistance ............................................................................. 55 4.31.1 Initial measurements .................................................................................... 55 4.31.2 Test procedure ............................................................................................. 55 4.31.3 Final inspection, measurements and requirements ........................................ 55 4.32 Solvent resistance of marking .............................................................................. 55 4.32.1 Test procedure ............................................................................................. 55 4.32.2 Final inspection, measurements and requirements ........................................ 56 4.33 Mounting (for surface mount capacitors only) ....................................................... 56 4.33.1 Substrate ..................................................................................................... 56 4.33.2 Wave soldering ............................................................................................ 56 4.33.3 Reflow soldering .......................................................................................... 56 4.34 Shear test ........................................................................................................... 59 4.34.1 Test procedure ............................................................................................. 59 4.34.2 Final inspection, measurements and requirements ........................................ 59 4.35 Substrate bending test ........................................................................................ 59 4.35.1 Test procedure ............................................................................................. 59 4.35.2 Recovery ..................................................................................................... 60 4.35.3 Final inspection and requirements ................................................................ 60 4.36 Dielectric absorption ........................................................................................... 60 4.36.1 Test procedure ............................................................................................. 60 4.36.2 Requirement ................................................................................................ 61 4.37 Damp heat, steady state, accelerated .................................................................. 61 4.37.1 Initial measurements .................................................................................... 61 4.37.2 Test methods ......................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.