SIST EN ISO 7866:2012/A2:2025
(Amendment)Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024)
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024)
Gasflaschen - Wiederbefüllbare nahtlose Gasflaschen aus Aluminiumlegierungen - Auslegung, Bau und Prüfung - Änderung 2 (ISO 7866:2012/Amd 2:2024)
Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être rechargées - Conception, construction et essais - Amendement 2 (ISO 7866:2012/Amd 2:2024)
Plinske jeklenke - Ponovno polnljive plinske jeklenke iz celega iz aluminijevih zlitin - Konstruiranje, izdelava in preskušanje - Dopolnilo A2 (ISO 7866:2012/Amd 2:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2025
Plinske jeklenke - Ponovno polnljive plinske jeklenke iz celega iz aluminijevih zlitin
- Konstruiranje, izdelava in preskušanje - Dopolnilo A2 (ISO 7866:2012/Amd
2:2024)
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction
and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024)
Gasflaschen - Wiederbefüllbare nahtlose Gasflaschen aus Aluminiumlegierungen -
Auslegung, Bau und Prüfung - Änderung 2 (ISO 7866:2012/Amd 2:2024)
Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être
rechargées - Conception, construction et essais - Amendement 2 (ISO 7866:2012/Amd
2:2024)
Ta slovenski standard je istoveten z: EN ISO 7866:2012/A2:2025
ICS:
23.020.35 Plinske jeklenke Gas cylinders
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 7866:2012/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2025
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Refillable seamless aluminium alloy gas
cylinders - Design, construction and testing - Amendment
2 (ISO 7866:2012/Amd 2:2024)
Bouteilles à gaz - Bouteilles à gaz sans soudure en Gasflaschen - Wiederbefüllbare nahtlose Gasflaschen
alliage d'aluminium destinées à être rechargées - aus Aluminiumlegierungen - Auslegung, Bau und
Conception, construction et essais - Amendement 2 Prüfung - Änderung 2 (ISO 7866:2012/Amd 2:2024)
(ISO 7866:2012/Amd 2:2024)
This amendment A2 modifies the European Standard EN ISO 7866:2012; it was approved by CEN on 22 December 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7866:2012/A2:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 7866:2012/A2:2025) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 7866:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2025, and
conflicting national standards shall be withdrawn at the latest by July 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of IS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.