SIST EN 13480-4:2018/oprA2:2020

Metallic industrial piping - Part 4: Fabrication and installation

This Part of this European Standard specifies the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3:2017.

Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung

Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation

Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A2

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Jun-2020
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: TLP - Pressure vessels
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 08-Apr-2020
• Due Date: 26-Aug-2020
• Completion Date: 24-Jun-2020
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13480-4:2017/FprA2 - Metallic industrial piping - Part 4: Fabrication and installation

RELATIONS

• Revised: SIST EN 13480-4:2018 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 01-May-2020

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13480-4:2018/oprA2:2020
01-maj-2020
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A2
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2017/prA2
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2018/oprA2:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13480-4:2018/oprA2:2020
---------------------- Page: 2 ----------------------
SIST EN 13480-4:2018/oprA2:2020
DRAFT
EUROPEAN STANDARD
EN 13480-4:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
May 2020
ICS
English Version
Metallic industrial piping - Part 4: Fabrication and
installation

Tuyauteries industrielles métalliques - Partie 4: Metallische industrielle Rohrleitungen - Teil 4:

Fabrication et installation Fertigung und Verlegung

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A2, if approved, will modify the European Standard EN 13480-4:2017. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2017/prA2:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13480-4:2018/oprA2:2020
EN 13480-4:2017/prA2:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Modification to 9.14.1, “General” .............................................................................................................. 4

2 Modification to 11.2.2, “CE Marking of installed piping” .................................................................. 4

3 Introduction of new informative Annex C, “Example for the extension of the P value” ........ 5

---------------------- Page: 4 ----------------------
SIST EN 13480-4:2018/oprA2:2020
EN 13480-4:2017/prA2:2020 (E)
European foreword

This document (EN 13480-4:2017/prA2:2020) has been prepared by Technical Committee CEN/TC 267

“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN E
...