SIST EN 61300-2-15:2008

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-15: Tests - Torque strength of coupling mechanism

This part of IEC 61300 applies an overload torque to twist-type coupling mechanisms. It is applicable to threaded or bayonet-twist type coupling mechanisms. It can be used to ensure that the coupling mechanism of a connector set or connector-device combination will withstand the torsional loads likely to be applied during normal service.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-15: Prüfungen - Torsionsfestigkeit der Verriegelung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-15: Essais - Robustesse du mécanisme de verrouillage aux efforts de torsion

IEC 61300-2-15:2008 applique un couple de surcharge à des mécanismes de verrouillage rotationnels. Elle est applicable à des mécanismes de verrouillage rotationnels filetés ou à baïonnette. Elle peut être utilisée pour vérifier que le mécanisme de verrouillage d’un jeu de connecteurs ou d’une combinaison connecteur-dispositif résistera aux charges de torsion susceptibles d’être appliquées dans des conditions normales de fonctionnement. Cette seconde édition annule et remplace la première édition parue en 1995, dont elle constitue une révision technique. Les modifications techniques spécifiques par rapport à l’édition précédente incluent le réexamen du préconditionnement et une réécriture du document complet conformément aux toutes dernières directives de l’IEC.
La présente version bilingue (2020-08) correspond à la version anglaise monolingue publiée en 2008-02.

Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in meritev - 2-15. del: Preskusi - Vrtilna trdnost spojnega mehanizma (IEC 61300-2-15:2008)

General Information

• Status: Published
• Publication Date: 07-Jul-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Jun-2008
• Due Date: 21-Aug-2008
• Completion Date: 08-Jul-2008
• Ref Project: EN 61300-2-15:2008 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism

Relations

• Replaces: SIST EN 61300-2-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-15: Tests - Torque strength of coupling mechanism
• Effective Date: 01-Sep-2008
• Replaces: SIST EN 61300-2-15:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-15: Tests - Torque strength of coupling mechanism
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-15:2008
01-september-2008
1DGRPHãþD
SIST EN 61300-2-15:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3RVWRSNLRVQRYQHJDSUHVNXãDQMD
LQPHULWHYGHO3UHVNXVL9UWLOQDWUGQRVWVSRMQHJDPHKDQL]PD,(&

Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism
(IEC 61300-2-15:2008)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-15: Prüfungen - Torsionsfestigkeit der Verriegelung (IEC 61300-2
-15:2008)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-15: Essais - Robustesse du mécanisme
de verrouillage aux efforts de torsion (CEI 61300-2-15:2008)
Ta slovenski standard je istoveten z: EN 61300-2-15:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-15:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-15

NORME EUROPÉENNE
May 2008
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-15:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-15: Tests -
Torque strength of coupling mechanism
(IEC 61300-2-15:2008)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-15: Essais - Teil 2-15: Prüfungen -
Robustesse du mécanisme Torsionsfestigkeit der Verriegelung
de verrouillage aux efforts de torsion (IEC 61300-2-15:2008)
(CEI 61300-2-15:2008)




This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-15:2008 E

---------------------- Page: 2 ----------------------

EN 61300-2-15:2008 - 2 -
Foreword
The text of document 86B/2539/CDV, future edition 2 of IEC 61300-2-15, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-15 on 2008-04-01.
This European Standard supersedes EN 61300-2-15:1997.
Specific technical changes from EN 61300-2-15:1997 include reexamination of the pre-conditioning.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-15:2008 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-15:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

IEC 61300-2-15
Edition 2.0 2008-02
INTERNATIONAL
STANDARD


Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-15: Tests – Torque strength of coupling mechanism


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
H
ICS 33.180.20 ISBN 2-8318-9601-0

---------------------- Page: 5 ----------------------

– 2 – 61300-2-15 © IEC:2008(E)
CONTENTS
FOREWORD.3

1 Scope.5
2 Normative references.5
3 General description.5
4 Apparatus.5
4.1 Stand .5
4.2 Specimen holder.5
4.3 Coupling.6
4.4 Coupling shaft .6
4.5 Alignment mechanism.6
4.6 Torque applicator and gauge .6
5 Procedure.7
5.1 Preparation of specimens .7
5.2 Pre-conditioning .7
5.3 Specimen mounting .7
5.4 Torque loading .7
5.5 Post-test examination .7
6 Severity .7
7 Details to be specified.7

Figure 1 – Coupling torque tester .6

---------------------- Page: 6 ----------------------

61300-2-15 © IEC:2008(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_______________

FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-15: Tests –
Torque strength of coupling mechanism


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance
...