SIST EN 4673-006:2010

Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated

This standard specifies the characteristics of self-locking, inserts for Inch series, self-broaching keys, in FE PA2601, MoS2 coated, for aerospace applications.
Classification: 900 MPa / 315 °C

Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 006: Mit selbsträumenden Stiften, aus hochwarmfestem Stahl FE-PA2601 (A286), MoS2 beschichtet

Diese Norm legt die Eigenschaften von selbstsichernden Gewindeeinsätzen für Inch-Reihen aus FE-PA2601,
MoS2 beschichtet und mit selbsträumenden Stiften für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 900 MPa1) / 315 °C2)

Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 006 : En acier résistant à chaud FE-PA2601 (A286), revêtues MoS2

Aeronavtika - Vložki, navoj UNJ, samozapiralni, s samozagozdnim ključem - 006. del: Iz toplotnoodpornega jekla FE-PA2601 (A286), mazani z MoS2

Ta standard opredeljuje značilnosti samozapiralnih vložkov z MJ navojem, s  samozagozdnimi ključi, iz FE-PA2601, mazanih z MoS2, za uporabo v aeronavtiki. Klasifikacija: 900 MPa 1)/315°C).

General Information

• Status: Published
• Publication Date: 15-Sep-2010
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2010
• Due Date: 06-Nov-2010
• Completion Date: 16-Sep-2010
• Ref Project: EN 4673-006:2010 - Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4673-006:2010
01-november-2010
$HURQDYWLND9ORåNLQDYRM81-VDPR]DSLUDOQLVVDPR]DJR]GQLPNOMXþHP
GHO,]WRSORWQRRGSRUQHJDMHNOD)(3$$PD]DQL]0R6
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part
006: In heat resisting steel FE-PA2601 (A286), MoS2 coated
Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit
selbsträumenden Stiften - Teil 006: Mit selbsträumenden Stiften, aus hochwarmfestem
Stahl FE-PA2601 (A286), MoS2 beschichtet
Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-
brochantes - Partie 006 : En acier résistant à chaud FE-PA2601 (A286), revêtues MoS2
Ta slovenski standard je istoveten z: EN 4673-006:2010
ICS:
49.030.30 Matice Nuts
SIST EN 4673-006:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4673-006:2010

---------------------- Page: 2 ----------------------

SIST EN 4673-006:2010


EUROPEAN STANDARD
EN 4673-006

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2010
ICS 49.030.30
English Version
Aerospace series - Inserts, UNJ threads, self-locking, with self-
broaching keys - Part 006: In heat resisting steel FE-PA2601
2
(A286), MoS coated
Série aérospatiale - Douilles filetées, à filetage UNJ, à Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden,
freinage interne, à clavettes auto-brochantes - Partie 006: selbstsichernd, mit selbsträumenden Stiften - Teil 006: Mit
En acier résistant à chaud FE-PA2601 (A286), revêtues selbsträumenden Stiften, aus hochwarmfestem Stahl FE-
2 2
MoS PA2601 (A286), MoS beschichtet
This European Standard was approved by CEN on 12 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4673-006:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4673-006:2010
EN 4673-006:2010 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .4
2 Normative references .4
3 Required characteristics .4
3.1 Configuration – Dimensions – Tolerances – Masses .4
3.2 Material .5
3.3 Surface treatment .5
4 Insert definition .5
4.1 Normal size insert .6
4.2 First repair size insert .6
4.3 Second repair size insert .7
4.4 External thread dimension .7
5 Designation .8
6 Marking .8
7 Technical specification .8

2

---------------------- Page: 4 ----------------------

SIST EN 4673-006:2010
EN 4673-006:2010 (E)
Foreword
This document (EN 4673-006:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn
at the latest by February 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov
...