SIST EN 3672:2024

Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C

This document specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications.
Classification: 1 210 MPa /730 °C .

Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C

Dieses Dokument legt die Eigenschaften von selbstsichernden Einnietmuttern aus NI P101HT, versilbert, für den Gebrauch bei konischen Bohrungen von 30° zur Verwendung in der Luft und Raumfahrt fest.
Klasse: 1 210 MPa /730 °C .

Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1 210 MPa (à température ambiante) / 730 °C

Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-P101HT, argentés, pour utilisation dans des trous coniques de 30°, pour les applications aérospatiales.
Classification : 1 210 MPa /730 °C .
Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-P101HT, argentés, pour utilisation dans des trous coniques de 30°, pour les applications aérospatiales.
Classification : 1 210 MPa /730 °C .

Aeronavtika - Zakovičena matica, samovarovalna, iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (Waspaloy), posrebrena, za odprtine 30° - Klasifikacija: 1210 MPa (pri okoljski temperaturi)/730 °C

Ta dokument določa lastnosti posrebrenih, samovarovalnih zakovičenih matic iz zlitine NI-P101HT za uporabo v konusnih odprtinah 30° v aeronavtiki.
Klasifikacija: 1210 Mpa/730 °C.

General Information

• Status: Published
• Public Enquiry End Date: 12-Jun-2023
• Publication Date: 01-Jul-2024
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Jun-2024
• Due Date: 01-Sep-2024
• Completion Date: 02-Jul-2024
• Ref Project: EN 3672:2024 - Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C

Relations

• Revised: SIST EN 3672:2017 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30°C swage - Classification: 1 210 MPa (at ambient temperature) / 730°C
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Zakovičena matica, samovarovalna, iz toplotnoodporne zlitine na
nikljevi osnovi NI-P101HT (Waspaloy), posrebrena, za odprtine 30° - Klasifikacija:
1210 MPa (pri okoljski temperaturi)/730 °C
Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT
(Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient
temperature) / 730 °C
Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1
210 MPa (bei Raumtemperatur) / 730 °C
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à
base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1
210 MPa (à température ambiante) / 730 °C
Ta slovenski standard je istoveten z: EN 3672:2024
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3672
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 3672:2016
English Version
Aerospace series - Shank nut, self-locking, in heat resisting
nickel base alloy NI-P101HT (Waspaloy), silver plated, for
30° swage - Classification: 1 210 MPa (at ambient
temperature) / 730 °C
Série aérospatiale - Écrou à sertir, à freinage interne, Luft- und Raumfahrt - Einnietmutter, selbstsichernd,
en alliage résistant à chaud base nickel NI-P101HT aus hochwarmfester Nickelbasislegierung NI-P101HT
(Waspaloy), argenté, pour sertissage 30° - (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1
Classification : 1 210 MPa (à température 210 MPa (bei Raumtemperatur) / 730 °C
ambiante)/730 °C
This European Standard was approved by CEN on 27 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3672:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration, dimensions, tolerances, masses . 4
4.2 Material . 4
4.3 Surface treatment . 4
5 Designation . 7
6 Marking . 7
7 Technical specification . 7

European foreword
This document (EN 3672:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting nation
...