SIST EN 2754:2009

Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 °C

This standard specifies the characteristics of two lug, counterbored, floating anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, the dimensions of which are in conformity with ISO 3209. These nuts are intended for use in aircraft assemblies, in which the fasteners are mainly subjected to shear loads. The counterbore of nuts with thread diameter equal to or greater than 4 mm is deep enough to accommodate a bolt shank in excess of assembly thickness, as well as the incomplete threads. The 3 mm diameter nut has no counterbore. They are intended to be used with threaded parts of 1 100 MPa 1) tensile strength classification. The cadmium plating restricts the application to temperatures not exceeding 235 °C.

Luft- und Raumfahrt - Gehäuse-Annietmuttern, selbstsichernd, beweglich, beiderseitiger Flansch mit zylindrischer Aussenkung - Klasse: 1100 MPa/235 °C

Diese Norm legt die Eigenschaften für Gehäuse-Annietmuttern mit beiderseitigem Flansch, zylindrischer Aussenkung, beweglich, selbstsichernd durch den unrund geformten oberen Abschnitt mit den Maßen nach ISO 3209, fest.
Diese Muttern sind für die Anwendung bei der Montage von Luftfahrzeugen vorgesehen, wo die Verbindungs¬elemente hauptsächlich den Scherbeanspruchungen ausgesetzt sind. Die Aussenkung von Muttern mit Gewindedurchmesser gleich oder größer 4 mm ist tief genug, um einen Bolzenschaft, der länger als die Dicke der zu montierenden Teile ist, sowie unvollständige Gewinde aufzunehmen.
Die Mutter mit einem Durchmesser von 3 mm hat keine Aussenkung.
Die Muttern sind für die Anwendung mit den Gewindeteilen der Zugfestigkeitsklasse von 1 100 MPa ) vorge¬sehen.
Das Verkadmen begrenzt die Anwendung auf Temperaturen nicht höher als 235 °C.

Série aérospatiale - Écrous à river à freinage interne flottants, double patte avec chambrage - Classification: 1100 MPa/235 °C

Aeronavtika - Zakovne matice, samovarovalne, dvostranske, premične, z izvrtino za valjaste vijake - Klasifikacija: 1100 MPa/235 °C

General Information

• Status: Published
• Publication Date: 12-Jul-2009
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Apr-2009
• Due Date: 04-Jul-2009
• Completion Date: 13-Jul-2009
• Ref Project: EN 2754:2006 - Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1 100 MPa/235 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Gehäuse-Annietmuttern, selbstsichernd, beweglich, beiderseitiger Flansch mit zylindrischer Aussenkung - Klasse: 1100 MPa/235 °CSérie aérospatiale - Écrous à river à freinage interne flottants, double patte avec chambrage - Classification: 1100 MPa/235 °CAerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2754:2006SIST EN 2754:2009en,de01-september-2009SIST EN 2754:2009SLOVENSKI
STANDARD



SIST EN 2754:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2754
April 2006 ICS 49.030.30 English Version
Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1 100 MPa/235 °C
Série aérospatiale - Écrous à river à freinage interne flottants, double patte avec chambrage - Classification : 1 100 MPa/235 °C
Luft- und Raumfahrt - Gehäuse-Annietmuttern, selbstsichernd, beweglich, beiderseitiger Flansch mit zylindrischer Aussenkung - Klasse: 1 100 MPa/235 °C This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2754:2006: ESIST EN 2754:2009



EN 2754:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.8 5 Marketing.8 6 Technical specification.8
SIST EN 2754:2009



EN 2754:2006 (E) 3 Foreword This European Standard (EN 2754:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 2754:2009



EN 2754:2006 (E) 4 1 Scope This standard specifies the characteristics of two lug, counterbored, floating anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, the dimensions of which are in conformity with ISO 3209. These nuts are intended for use in aircraft assemblies, in which the fasteners are mainly subjected to shear loads. The counterbore of nuts with thread diameter equal to or greater than 4 mm is deep enough to acc
...