SIST EN 4644-002:2017
(Main)Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
This European Standard specifies the common conditions for rectangular electrical modular connectors for receptacles and plugs with interchangeable modules and a continuous operating temperature of 175 °C (or 125 °C).
Contact arrangements for fibre optic contacts are described in EN 4639-002.
Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 002: Leistungsdaten und Kontaktanordnungen
Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 002: Spécification de performances et arrangements de contacts
Aeronavtika - Konektor, električni in optični, pravokotni, modularni, pravokotni vložki, stalna delovna temperatura 175 °C (ali 125 °C) - 002. del: Specifikacija lastnosti in razporeditev kontaktov
Ta evropski standard določa skupne pogoje v zvezi s pravokotnimi električnimi modularnimi konektorji za priključne doze in vtiče z zamenljivimi moduli pri stalni delovni temperaturi 175 °C (ali 125 °C).
Razporeditev kontaktov za kontakte iz optičnih vlaken je opisana v standardu EN 4639-002.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 002: Leistungsdaten und KontaktanordnungenSérie aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 002: Spécification de performances et arrangements de contactsAerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4644-002:2016SIST EN 4644-002:2017en,fr,de01-marec-2017SIST EN 4644-002:2017SLOVENSKI
STANDARDSIST EN 4644-002:20121DGRPHãþD
SIST EN 4644-002:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4644-002
December
t r s x ICS
v {ä r x râ
v {ä r { r Supersedes EN
v x v væ r r tã t r s tEnglish Version
Aerospace series æ Connectorá electrical and opticalá rectangulará modulará rectangular insertsá operating Specification of performance and contact arrangements Série aérospatiale æ Connecteurá électrique et optiqueá rectangulaireá modulaireá à inserts rectangulairesá continu æ Partie
r r tã Spécification de performances et arrangements de contacts
Luftæ und Raumfahrt æ Elektrische und optische Rechtecksteckverbinderá modulará rechteckige Kontakteinsätzeá Dauerbetriebstemperatur
s y w
¹C l
r r tã Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on
t s November
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x v væ r r tã t r s x ESIST EN 4644-002:2017
EN 4644-002:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 6 4 Description of models . 6 5 Description and codification of shell classes . 7 6 Operating conditions – Permissible cables dimensions . 7 7 Operating characteristics . 8 8 Product standards . 9 9 Polarization . 10 10 Modules contact arrangements . 24 11 Contacts . 28 12 Sealing plugs . 28 13 Rear accessories. 28 14 Tooling contacts . 28 15 Assembly and wiring instructions . 28
SIST EN 4644-002:2017
EN 4644-002:2016 (E) 3 European foreword This document (EN 4644-002:2016) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4644-002:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4644-002:2017
EN 4644-002:2016 (E) 4 1 Scope This European Standard specifies the common conditions for rectangular electrical modular connectors for receptacles and plugs with interchangeable modules and a continuous operating temperature of 175 °C (or 125 °C). Contact arrangements for fibre optic contacts are described in EN 4639-002. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3197, Aerospace series — Design and installation of aircraft electrical and optical interconnection systems EN 4529-002, Aerospace series — Elements of electrical and optical connection — Sealing plugs — Part 002: Index of product standards EN 4639-002, Aerospace series — Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder — Part 002: List of product standards EN 4644-001, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 001: Technical specification EN 4644-003, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 003: Rectangular inserts — Product standard EN 4644-011, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 011: Plug, size 1, class A, C and E — Product standard EN 4644-012, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 012: Receptacle, size 1, class A, C and E — Product standard EN 4644-013, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 013: Plug, size 1, with ground block, without mounting holes, class B and F — Product standard EN 4644-014, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 014: Receptacle, size 1, with ground block, class B and F — Product standard EN 4644-021, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 021: Plug, size 2, without mounting holes, class A, C and E — Product standard EN 4644-022, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 022: Plug, size 2, with mounting holes, class A, C and E — Product standard SIST EN 4644-002:2017
EN 4644-002:2016 (E) 5 EN 4644-023, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 023: Plug, size 2, with ground block, class B and F — Product standard EN 4644-024, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 024: Receptacle, size 2, class A, C and E — Product standard EN 4644-025, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 025: Receptacle, size 2, with flange, class A, C and E — Product standard EN 4644-026, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 026: Receptacle, size 2, with ground block, class B and F — Product standard EN 4644-124, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 124: Plug, size 2, class A, C and D — Product standard 1) EN 4644-125, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 125: Receptacle, size 2, class A, C and D — Product standard 1) EN 4644-126, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 126: Receptacle, size 2, with float mount, class A, C and D — Product standard 1) EN 4644-131, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175°C (or 125°C) continuous — Part 131: Plug, size 3, for rack and panel applications, class C and D — Product standard EN 4644-133, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 133: Receptacle, size 3, for rack and panel application, class C and D — Product standard EN 4644-134, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 134: Plug, size 3, fix mount, class A, C and D — Product standard 1) EN 4644-135, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 135: Receptacle, size 3, fix mount, class A, C and D — Product standard 1)
1) In preparation at the date of publication of this European Standard. SIST EN 4644-002:2017
EN 4644-002:2016 (E) 6 EN 4644-136, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 136: Receptacle, size 3, float mount, class A, C and D — Product standard 1) EN 4644-141, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 141: Plug, size 4, for rack and panel applications, class C and D — Product standard EN 4644-142, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 142: Receptacle, size 4, for rack and panel application, class C and D — Product standard EN 4644-144, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 144: Plug, size 4, class A, C and D — Product standard 1) EN 4644-145, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 145: Receptacle, size 4, class A, C and D — Product standard 1) EN 4644-201, Aerospace series — Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous — Part 201: Locking and polarizing hardware — Product standard EN 4644-202, Aerospace series — Connector, electrical and optical, rectangular modular, operating temperature 175 °C (or 125 °C) continuous — Part 202: Polarizing hardware — Product standard EN 4644-203, Aerospace series — Connector, electrical and optical, rectangular modular, operating te
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.