kSIST FprEN ISO 19932-3:2019

Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack sprayers in use (ISO/FDIS 19932-3:2019)

This Standard specifies the requirements and test methods for the inspection in use of Knapsack sprayers of over 3 litres nominal volume carried on the back or shoulder of the operator for applying Plant Protection Products (PPPs) in agriculture and horticulture.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic energy to atomise the spray liquid.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk to the operator and the environment and its performance to achieve good application.
It does not apply to other portable equipment such as knapsack combustion engine-driven air blast sprayers/mistblowers (see ISO 10988 and ISO 28139), Controlled Droplet Application equipment utilising rotary atomisers, or portable application equipment for spatial application (e.g. foggers).

Pflanzenschutzgeräte - Tragbare Geräte - Teil 3: Kontrolle von in Gebrauch befindlichen Geräten (ISO/FDIS 19932-3:2019)

Matériel de protection des cultures - Pulvérisateurs à dos - Partie 3: Contrôle des pulvérisateurs portables à dos en service (ISO/FDIS 19932-3:2019)

Oprema za zaščito poljščin - Nahrbtni škropilniki - 3. del: Preverjanje delovanja nahrbtnih škropilnikov (ISO/FDIS 19932-3:2019)

General Information

• Status: Not Published
• Public Enquiry End Date: 21-Jun-2017
• ICS: 65.060.40 - Plant care equipment
• Technical Committee: IMKG - Machinery for agriculture and forestry
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 04-Jul-2022
• Due Date: 09-Jul-2022
• Completion Date: 04-Jul-2022
• Directive: 2009/128/EC - Directive 2009/128/EC of the European Parliament and of the Council of 21 october 2009 establsihing a framework for Community action to achieve the sustainable use of pesticides
• Mandate: M/435 - Mandate to CEN, CENELEC and ETSI for the development of a standards on inspection of pesticide application equipment in use,
• Ref Project: FprEN ISO 19932-3 - Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack sprayers in use (ISO/FDIS 19932-3:2019)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 19932-3:2017
01-junij-2017
2SUHPD]D]DãþLWRSROMãþLQ1DKUEWQLãNURSLOQLNLGHO3UHYHUMDQMHGHORYDQMD
QDKUEWQLKãNURSLOQLNRY,62',6
Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack
sprayers in use (ISO/DIS 19932-3:2017)
Pflanzenschutzgeräte - Tragbare Geräte - Teil 3: Kontrolle von in Gebrauch befindlichen
Geräten (ISO/DIS 19932-3:2017)
Matériel de protection des cultures - Pulvérisateurs à dos - Partie 3: Contrôle des
pulvérisateurs portables à dos en service (ISO/DIS 19932-3:2017)
Ta slovenski standard je istoveten z: prEN ISO 19932-3
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 19932-3:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19932-3:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19932-3:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19932-3
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2017-03-30 2017-06-21
Equipment for crop protection — Knapsack sprayers —
Part 3:
Inspection of knapsack sprayers in use
Matériel de protection des cultures — Pulvérisateurs à dos —
Partie 3: Contrôle des pulvérisateurs portables à dos en service
ICS: 65.060.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19932-3:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19932-3:2017
ISO/DIS 19932-3:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19932-3:2017
ISO/DIS 19932-3:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and method of verification . 2
4.1 General requirements . 2
4.2 Harness . 2
4.3 Spray tank .
...