65.060.40 - Plant care equipment

This document, to be used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of mounted, semi-mounted, trailed and self-propelled
agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provid...view more

This document, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application, as placed on the market by the manufacturer and designed for a single operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided b...view more

This document specifies the requirements, test methods and verification of the inspection of aerial fixed wing and rotary aircraft spray systems for agriculture, forestry, turf, and vegetation control in transport access ways (such as gas and electric lines), with regard to minimizing the potential risk of environmental contamination during use. This document applies only to manned aerial aircraft. It does not cover aircraft safety and design criteria for air worthiness, aircraft registration, p...view more

This document specifies test methods and the environmental conditions for evaluating the performance of reciprocating positive displacement pumps and centrifugal pumps designed for crop protection equipment. This document is applicable when defining the performance of stand-alone pumps or pumps that are installed on a sprayer. Some of the tests indicated in this document are suited only for specific pump types. It is not applicable to pesticide metering pumps for injection systems.

This document defines terms commonly used in relation to equipment for applying plant protection products for crop protection.

This document specifies safety requirements and their verification, environmental requirements and related test methods, and minimum performance limits, for the design and construction of knapsack combustion engine-driven airblast sprayers as defined in 3.9. It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It addresses general operating parameter...view more

This document, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of portable agricultural grain augers. This document covers conventional and swing-away portable agricultural augers designed primarily for conveying agricultural materials on farms. This document does not deal with the design or safety aspects of: — drag augers; — bin sweeps; — other augers that do not have wheels suitable for towing. NOTE Example...view more

This document specifies the system of colour coding for flow rate identification of nozzles used on sprayers. It is applicable to hydraulic energy nozzles such as flat and cone nozzles used for the application of crop protection products. This document is not applicable to adjustable nozzles. It allows for flow recognition on small parts in order to avoid any confusion under normal conditions of use.

This document specifies procedures for classifying droplet size spectra from atomizers used in spraying for crop protection. It provides a reference system for defining classes of droplet size spectra. Depending on their function principle and individual setup, measuring systems for droplet sizing can give different results. This document provides a means of comparing measured droplet size spectra to reference spectra and enables relative comparisons of droplet size spectra obtained from differe...view more

This document is applicable for sprayers intended to apply liquid over a horizontal surface.
This document specifies test methods to assess sprayed liquid horizontal transverse distribution.
Methods are based on sprayed liquid volume measurement, nozzle flow rate measurement or nozzle tip
pressure measurement.
This document does not cover aerial sprayers.
Hydraulic sprayers use a range of design features to deliver and control spray. The test methods
provided in this document are all usefu...view more

This document specifies the test method to assess the performance of volume/area adjustment systems
for spray systems.
This document is not applicable for manually-operated knapsack sprayers or for aircraft sprayers.

ISO 5682-1:2017 specifies test methods to assess the performance of sprayer nozzles with the exception of droplet characteristics. Applicable tests by nozzle type are described in an informative annex as a guide, but this is not required for use of this document.

ISO 5682-1:2017 specifies test methods to assess the performance of sprayer nozzles with the exception of droplet characteristics. Applicable tests by nozzle type are described in an informative annex as a guide, but this is not required for use of this document.

ISO 5682-3:2017 specifies the test method to assess the performance of volume/area adjustment systems for spray systems. ISO 5682-3:2017 is not applicable for manually-operated knapsack sprayers or for aircraft sprayers.

ISO 5682-2:2017 is applicable for sprayers intended to apply liquid over a horizontal surface. ISO 5682-2:2017 specifies test methods to assess sprayed liquid horizontal transverse distribution. Methods are based on sprayed liquid volume measurement, nozzle flow rate measurement or nozzle tip pressure measurement. ISO 5682-2:2017 does not cover aerial sprayers. Hydraulic sprayers use a range of design features to deliver and control spray. The test methods provided in this document are all usefu...view more

ISO 1401:2016 specifies requirements for three types of flexible rubber hose for pressure spraying of agricultural chemicals and/or fertilizer products within a temperature range of ?10 °C to +60 °C.

ISO 1401:2016 specifies requirements for three types of flexible rubber hose for pressure spraying of agricultural chemicals and/or fertilizer products within a temperature range of ?10 °C to +60 °C.

ISO 22401:2015 provides a test method to measure spray sedimentation from horizontal boom sprayers using a test bench. The sedimentation measure gives a value for potential spray drift. These measurements can be used to compare different sprayer setups on the same sprayer. ISO 22401:2015 is applicable to mounted, trailed and self-propelled horizontal boom sprayers used in arable crops; and horizontal boom sprayers used for weed control in orchards/vineyards and spray application on horticultural...view more

This European Standard specifies the requirements and methods of their verification for the inspection of air-assisted sprayers for bush and tree crops in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas. ISO 16122 specifies the requirements and test methods for the inspection of machines in use. It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application. This part of ISO 16122 defines the general requirements to be fulfilled. The specific requ...view more