M/435 - Pesticide application

This International Standard specifies the requirements and test methods for their verification for inspection in use for aerial fixed wing and rotary aircraft spray systems for agriculture, horticulture forestry and human health, with respect to minimizing the risk of environmental.
This part of ISO 16122 relates mainly to the condition of the equipment with respect to its potential risk for the environment and its performance to achieve good applications.
NOTE: Requirements for the protection of inspectors during an inspection are given in ISO 16122-1.

This European Standard specifies the requirements and methods of their verification for the inspection of air-assisted sprayers for bush and tree crops in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas. ISO 16122 specifies the requirements and test methods for the inspection of machines in use. It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application. This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative. It also includes minimum safety requirements dealing with the operator’s safety during inspection.

This International Standard, to be used with ISO 16122-1, specifies the requirements and methods for their verification for the inspection of fixed and semi-mobile prayers in use. It relates mainly to the condition of the sprayer in respect of the potential risk of environmental contamination and opportunities to achieve good application.

This European Standard specifies the requirements and methods of their verification for the inspection of field crop sprayers in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

ISO 16122-2:2015, when used together with ISO 16122-1, specifies the requirements and test methods for the inspection of horizontal boom sprayers, when in use. The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application. Requirements for the protection of inspectors during an inspection are given in ISO 16122 1.

ISO 16122-3:2015, when used together with ISO 16122-1, specifies the requirements and test methods for the inspection of sprayers for bushes and trees, when in use. The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve a good application. Requirements for the protection of inspectors during an inspection are given in ISO 16122-1.

ISO 16122-4:2015, when used together with ISO 16122‑1, specifies the requirements and test methods for the inspection of fixed and semi-mobile sprayers, when in use.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
It does not apply to application equipment for spatial treatment (e.g. foggers).
Note that requirements for the protection of inspectors during an inspection are given in ISO 16122‑1.

ISO 16122-1:2015 defines the general requirements to be fulfilled for the inspection of all types of sprayers for plant protection products used in agriculture, horticulture, forestry and other areas, except knapsack sprayers (see ISO 19932?1 and ISO 19932?2).
The specific requirements for the different types of sprayers are defined in the relevant specific parts of ISO 16122. When used in conjunction with the relevant sprayer specific part, ISO 16122-1:2015 specifies the requirements and test methods for the in use inspection of sprayers. The requirements relate mainly to the condition of the sprayer with respect to potential risks for the environment and its performance to achieve a good application.
ISO 16122-1:2015 also includes minimum requirements for the preparation of the sprayer for the inspection and the minimum safety requirements with respect to the safety of the inspector (test operator) during the inspection.

This document specifies the requirements, test methods and verification of the inspection of aerial fixed wing and rotary aircraft spray systems for agriculture, forestry, turf, and vegetation control in transport access ways (such as gas and electric lines), with regard to minimizing the potential risk of environmental contamination during use.
This document applies only to manned aerial aircraft. It does not cover aircraft safety and design criteria for air worthiness, aircraft registration, pilot or operator requirements, all of which are specified separately by countries or regions.
This document relates mainly to the condition of the equipment with respect to its potential risk for the environment and its performance to achieve good applications.
The general requirements of ISO 16122-1 apply where appropriate, including for the protection of inspectors during an inspection.

This Standard specifies the requirements and test methods for the inspection in use of Knapsack sprayers of over 3 litres nominal volume carried on the back or shoulder of the operator for applying Plant Protection Products (PPPs) in agriculture and horticulture.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic energy to atomise the spray liquid.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk to the operator and the environment and its performance to achieve good application.
It does not apply to other portable equipment such as knapsack combustion engine-driven air blast sprayers/mistblowers (see ISO 10988 and ISO 28139), Controlled Droplet Application equipment utilising rotary atomisers, or portable application equipment for spatial application (e.g. foggers).

This European Standard specifies the requirements and methods of their verification for the inspection of air-assisted sprayers for bush and tree crops in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas.
ISO 16122 specifies the requirements and test methods for the inspection of machines in use.
It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application.
This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative.
It also includes minimum safety requirements dealing with the operator’s safety during inspection.

This European Standard specifies the requirements and methods of their verification for the inspection of field crop sprayers in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This European Standard specifies the requirements and methods of their verification for the inspection of air-assisted sprayers for bush and tree crops in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This Standard specifies the requirements and test methods for the inspection in use of Knapsack sprayers of over 3 litres nominal volume carried on the back or shoulder of the operator for applying Plant Protection Products (PPPs) in agriculture and horticulture.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic energy to atomise the spray liquid.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk to the operator and the environment and its performance to achieve good application.
It does not apply to other portable equipment such as knapsack combustion engine-driven air blast sprayers/mistblowers (see ISO 10988 and ISO 28139), Controlled Droplet Application equipment utilising rotary atomisers, or portable application equipment for spatial application (e.g. foggers).

This European Standard specifies the requirements and methods of their verification for the inspection of field crop sprayers in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas.
ISO 16122 specifies the requirements and test methods for the inspection of machines in use.
It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application.
This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative.
It also includes minimum safety requirements dealing with the operator’s safety during inspection.