SIST EN 2450:2019

Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Bars - De ≤ 40 mm

This document specifies the requirements relating to:
Steel 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Bars
De ≤ 40 mm
for aerospace applications.
The ASD STAN designation of this material is FE-PL73.

Luft- und Raumfahrt - Stahl 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Stangen - De ≤ 40 mm

Série aérospatiale - Acier 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Barres - De ≤ 40 mm

Le présent document spécifie les exigences relatives à :
Acier 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Barres
De ≤ 40 mm
pour applications aérospatiales.

Aeronavtika - Jeklo 31Ni10 - 1230 MPa ≤ Rm ≤ 1420 MPa - Palice - De ≤ 40 mm

Ta dokument določa zahteve, ki se nanašajo na:
Jeklo 31Ni10
1230 MPa ≤ Rm ≤ 1420 MPa
Palice
De ≤ 40 mm
za uporabo v aeronavtiki.
Oznaka ASD STAN tega materiala je FE-PL73.

General Information

• Status: Published
• Publication Date: 07-Jan-2019
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 21-Dec-2018
• Due Date: 25-Feb-2019
• Completion Date: 08-Jan-2019
• Ref Project: EN 2450:2018 - Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Bars - De ≤ 40 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2450:2019
01-marec-2019
$HURQDYWLND-HNOR1L03D”5P”03D3DOLFH'H”PP
$HURVSDFHVHULHV6WHHO1L03D”5P”03D%DUV'H”PP
/XIWXQG5DXPIDKUW6WDKO1L03D”5P”03D6WDQJHQ'H”
PP
6pULHDpURVSDWLDOH$FLHU1L03D”5P”03D%DUUHV'H”PP
Ta slovenski standard je istoveten z: EN 2450:2018
ICS:
49.025.10 Jekla Steels
SIST EN 2450:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2450:2019

---------------------- Page: 2 ----------------------

SIST EN 2450:2019


EN 2450
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS
English Version

Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420
MPa - Bars - De ≤ 40 mm

Série aérospatiale - Acier 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 Luft- und Raumfahrt - Stahl 31Ni10 - 1 230 MPa ≤ Rm ≤
420 MPa - Barres - De ≤ 40 mm 1 420 MPa - Stangen - De ≤ 40 mm
This European Standard was approved by CEN on 27 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2450:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2450:2019
EN 2450:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5

2

---------------------- Page: 4 ----------------------

SIST EN 2450:2019
EN 2450:2018 (E)
European foreword
This document (EN 2450:2018) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal,
...