SIST EN 3359:2025
(Main)Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stocks - a or D ≤ 300 mm
Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stocks - a or D ≤ 300 mm
This document specifies the requirements relating to:
Steel X3CrNiMoAl13-8-2 (1.4534)
Vacuum induction melted and consumable electrode remelted
Softened
Forging stocks
a or D ≤ 300 mm
for aerospace applications.
NOTE ASD-STAN designation: FE-PM1503
Material number: 1.4534
Luft- und Raumfahrt - Stahl X3CrNiMoAl13-8-2 (1.4534) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
No Scope available
Série aérospatiale - Acier X3CrNiMoAl13-8-2 (1.4534) - Élaboré sous vide par induction et refondu à l’électrode consommable - Adouci - Produits destinés à la forge - a ou D ≤ 300 mm
Le présent document spécifie les exigences relatives à :
Acier X3CrNiMoAl13-8-2 (1.4534)
Élaboré sous vide par induction et refondu à l'électrode consommable
Adouci
Produits destinés à la forge
a ou D ≤ 300 mm
pour les applications aérospatiales.
Désignation ASD-STAN : FE-PM1503
Numéro de matériau : 1.4534
Aeronavtika - Jeklo X3CrNiMoAl13-8-2 (1.4534) - Taljeno z vakuumsko indukcijo in pretaljeno s taljivo elektrodo - Mehčano - Materiali za kovanje - a ali D ≤ 300 mm
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2025
Aeronavtika - Jeklo X3CrNiMoAl13-8-2 (1.4534) - Taljeno z vakuumsko indukcijo in
pretaljeno s taljivo elektrodo - Mehčano - Materiali za kovanje - a ali D ≤ 300 mm
Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) - Vacuum induction melted and
consumable electrode remelted - Softened - Forging stocks - a or D ≤ 300 mm
Luft- und Raumfahrt - Stahl X3CrNiMoAl13-8-2 (1.4534) -
Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen -
Geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
Série aérospatiale - Acier X3CrNiMoAl13-8-2 (1.4534) - Élaboré sous vide par induction
et refondu à l’électrode consommable - Adouci - Produits destinés à la forge - a ou D ≤
300 mm
Ta slovenski standard je istoveten z: EN 3359:2025
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3359
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2025
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3359:2007
English Version
Aerospace series - Steel X3CrNiMoAl13-8-2 (1.4534) -
Vacuum induction melted and consumable electrode
remelted - Softened - Forging stocks - a or D 300 mm
Série aérospatiale - Acier X3CrNiMoAl13-8-2 (1.4534) - Luft- und Raumfahrt - Stahl X3CrNiMoAl13-8-2
Élaboré sous vide par induction et refondu à l'électrode (1.4534) - Vakuuminduktionserschmolzen und mit
consommable - Adouci - Produits destinés à la forge - a selbstverzehrender Elektrode umgeschmolzen -
ou D 300 mm Geglüht - Schmiedevormaterial - a oder D 300 mm
This European Standard was approved by CEN on 27 July 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3359:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (EN 3359:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by March 2026, and conflicting national standards shall be withdrawn
at the latest by March 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document will supersede EN 3359:2007.
— EN 3359 (P2), 07/2007 – Update of the material designation, correction of the format of Table 1 to
comply with the requirements of the EN 4500 series, update of Clause 2 and addition of a
bibliography.
According to the C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.