SIST EN ISO 5832-3:2017
(Main)Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016)
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016)
Specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti 6-Al 4-V alloy) for use in the manufacture of surgical implants.
Chirurgische Implantate - Metallische Werkstoffe - Teil 3: Titan 6-Aluminium 4-Vanadium Knetlegierung (ISO 5832-3:2016)
Dieser Teil von ISO 5832 beschreibt die Eigenschaften und dazugehörige Prüfverfahren für die Knetlegierung aus Titan, die als Titan 6-Aluminium 4-Vanadium Legierung (Ti 6-Al 4-V Legierung) bei der Herstellung von chirurgischen Implantaten bekannt ist.
ANMERKUNG Die mechanischen Eigenschaften einer Probe, die an einem Endprodukt aus diesem Metall erhalten werden, müssen nicht notwendigerweise mit den Angaben in diesem Teil von ISO 5832 übereinstimmen.
Implants chirurgicaux - Produits à base de métaux - Partie 3 : Alliage à forger à base de titane, d'aluminium 6 et de vanadium 4 (ISO 5832-3:2016)
ISO 5832-3:2016 spécifie les caractéristiques de l'alliage corroyé à base de de titane, connu sous le nom d'alliage de titane, d'aluminium-6 et de vanadium-4 (alliage Ti 6-AI4-V) utilisable dans la fabrication d'implants chirurgicaux, et les méthodes d'essai correspondantes.
NOTE Les propriétés mécaniques d'un échantillon prélevé sur un produit fini fabriqué avec cet alliage peuvent ne pas nécessairement être conformes aux spécifications données dans la présente partie de l'ISO 5832.
Vsadki (implantati) za kirurgijo - Kovinski materiali - 3. del: Titanova 6-aluminijeva 4-vanadijeva zlitina (ISO 5832-3:2016)
Določa lastnosti in zadevne preskusne metode za kovano titanovo zlitino, znano kot titanova 6-aluminijeva 4-vanadijeva zlitina (zlitina Ti 6-AI 4-V), iz katere izdelujejo vsadke za kirurgijo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5832-3:2017
01-april-2017
1DGRPHãþD
SIST EN ISO 5832-3:2012
Vsadki (implantati) za kirurgijo - Kovinski materiali - 3. del: Titanova 6-aluminijeva
4-vanadijeva zlitina (ISO 5832-3:2016)
Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-
vanadium alloy (ISO 5832-3:2016)
Chirurgische Implantate - Metallische Werkstoffe - Teil 3: Titan 6-Aluminium 4-Vanadium
Knetlegierung (ISO 5832-3:2016)
Implants chirurgicaux - Produits à base de métaux - Partie 3 : Alliage à forger à base de
titane, d'aluminium 6 et de vanadium 4 (ISO 5832-3:2016)
Ta slovenski standard je istoveten z: EN ISO 5832-3:2016
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
SIST EN ISO 5832-3:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5832-3:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 5832-3:2017
EN ISO 5832-3
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2016
EUROPÄISCHE NORM
ICS 11.040.40 Supersedes EN ISO 5832-3:2012
English Version
Implants for surgery - Metallic materials - Part 3: Wrought
titanium 6-aluminium 4-vanadium alloy (ISO 5832-
3:2016)
Implants chirurgicaux - Produits à base de métaux - Chirurgische Implantate - Metallische Werkstoffe - Teil
Partie 3: Alliage corroyé à base de titane, d'aluminium- 3: Titan 6-Aluminium 4-Vanadium Knetlegierung (ISO
6 et de vanadium-4 (ISO 5832-3:2016) 5832-3:2016)
This European Standard was approved by CEN on 12 September 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5832-3:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5832-3:2017
EN ISO 5832-3:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5832-3:2017
EN ISO 5832-3:2016 (E)
European foreword
This document (EN ISO 5832-3:2016) has been prepared by Technical Committee ISO/TC 150
“Implants for surgery” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 5832-3:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5832-3:2016 has been approved by CEN as EN ISO 5832-3:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 5832-3:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 5832-3:2017
INTERNATIONAL ISO
STANDARD 5832-3
Fourth edition
2016-10-15
Implants for surgery — Metallic
materials —
Part 3:
Wrought titanium 6-aluminium
4-vanadium alloy
Implants chirurgicaux — Produits à base de métaux —
Partie 3: Alliage corroyé à base de titane, d’aluminium-6 et de
vanadium-4
Reference number
ISO 5832-3:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 5832-3:2017
ISO 5832-3:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 5832-3:2017
ISO 5832-3:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Chemical composition . 1
5 Microstructure . 2
6 Mechanical properties . 2
6.1 Tensile . 2
6.2 Bending . 3
7 Test methods . 3
Annex A (normative) Catalogues of metallographic micrographs of typical alpha+beta
titanium microstructures . 4
Annex B (informative) Mechanical Properties Harmonization between ISO and ASTM
wrought titanium 6-aluminium 4-vanadium Implant Material Standards .5
Bibliography . 7
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 5832-3:2017
ISO 5832-3:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC 150, Implants for surgery, Subcommittee SC 1,
Materials.
This fourth edition cancels and replaces the third edition (ISO 5832-3:1996), which has been technically
revised.
ISO 5832 consists of the following parts, under the general title Implants for surgery — Metallic materials:
— Part 1: Wrought stainless steel
— Part 2: Unalloyed titanium
— Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
— Part 4: Cobalt-chromium-molybdenum casting alloy
— Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
— Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
— Part 7: Forgeable and cold-formed cobalt-chromium-n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.