SIST EN 50289-1-9:2002
(Main)Communication cables - Specifications for test methods -- Part 1-9: Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
Communication cables - Specifications for test methods -- Part 1-9: Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
Part 1-9 of EN 50289 details the test methods to determine the attenuation of converted common mode signals into differential mode signals due to balance characteristics of cables used in analogue and digital communication systems by using the transmission measurement method. The terms related to this attenuation are defined in 3.1, 3.2 and 3.3.
It is to be read in conjunction with Part 1-1 of EN 50289, which contains essential provisions for its application.
Kommunikationskabel - Spezifikationen für Prüfverfahren -- Teil 1-9: Elektrische Prüfverfahren - Unsymmetriedämpfung (Unsymmetriedämpfung am nahen und am fernen Ende)
Câbles de communication - Spécifications des méthodes d'essai -- Partie 1-9: Méthodes d'essais électriques - Affaiblissement de disymétrie (perte de conversion longitudinale, perte de transfert de conversion longitudinale)
La partie 1-9 de la Norme européenne EN 50289 donne en détail la méthode d'essai pour la détermination de l’affaiblissement du signal en mode commun converti en mode différentiel causé par les caractéristiques de symétrie des câbles utilisés dans les réseaux de communication analogiques et numériques à l'aide d'une méthode de mesure de transmission. Les termes relatifs à cet affaiblissement sont définis dans les paragraphes 3.1, 3.2 et 3.3.
Elle doit être lue avec la partie 1-1 de la Norme européenne EN 50289 qui contient les dispositions essentielles pour l'application de la présente partie.
Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50289-1-9:2002
01-september-2002
Communication cables - Specifications for test methods - Part 1-9: Electrical test
methods - Unbalance attenuation (longitudinal conversion loss, longitudinal
conversion transfer loss)
Communication cables - Specifications for test methods -- Part 1-9: Electrical test
methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion
transfer loss)
Kommunikationskabel - Spezifikationen für Prüfverfahren -- Teil 1-9: Elektrische
Prüfverfahren - Unsymmetriedämpfung (Unsymmetriedämpfung am nahen und am
fernen Ende)
Câbles de communication - Spécifications des méthodes d'essai -- Partie 1-9: Méthodes
d'essais électriques - Affaiblissement de disymétrie (perte de conversion longitudinale,
perte de transfert de conversion longitudinale)
Ta slovenski standard je istoveten z: EN 50289-1-9:2001
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
SIST EN 50289-1-9:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50289-1-9:2002
---------------------- Page: 2 ----------------------
SIST EN 50289-1-9:2002
EUROPEAN STANDARD EN 50289-1-9
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2001
ICS 33.120.20
English version
Communication cables - Specifications for test methods
Part 1-9: Electrical test methods - Unbalance attenuation
(longitudinal conversion loss, longitudinal conversion transfer loss)
Câbles de communication - Kommunikationskabel -
Spécifications des méthodes d'essai Spezifikationen für Prüfverfahren
Partie 1-9: Méthodes d'essais électriques - Teil 1-9: Elektrische Prüfverfahren -
Affaiblissement de disymétrie Unsymmetriedämpfung
(perte de conversion longitudinale, perte (Unsymmetriedämpfung am nahen und
de transfert de conversion longitudinale) am fernen Ende)
This European Standard was approved by CENELEC on 2001-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-1-9:2001 E
---------------------- Page: 3 ----------------------
SIST EN 50289-1-9:2002
EN 50289-1-9:2001 - 2 -
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 46X, Communication
cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as EN 50289-1-9 on 2001-05-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-05-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-04-01
This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the
European Commission and the European Free Trade Association.
---------------------- Page: 4 ----------------------
SIST EN 50289-1-9:2002
- 3 - EN 50289-1-9:2001
Contents
1 Scope . 4
2 Normative references . 4
3 Definitions. 4
4 Test method . 5
4.1 Equipment . 5
4.2 Test sample. 5
4.3 Procedure. 5
4.3.1 Calibration procedure. 5
4.3.2 Measuring procedure . 6
4.3.3 Screened cables . 6
4.3.4 Unscreened cables . 6
5 Expression of test results . 7
6 Test report. 8
---------------------- Page: 5 ----------------------
SIST EN 50289-1-9:2002
EN 50289-1-9:2001 - 4 -
1 Scope
Part 1-9 of EN 50289 details the test methods to determine the attenuation of converted common mode
signals into differential mode signals due to balance characteristics of cables used in analogue and digital
communication systems by using the transmission measurement method. The terms related to this
attenuation are defined in 3.1, 3.2 and 3.3.
It is to be read in conjunction with Part 1-1 of EN 50289, which contains essential provisions for its
application.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply
to this European Standard only when incorporated in it by amendment or revision. For undated references,
the latest edition of the publication referred to applies (including amendments).
EN 50289-1-1 2001 Communication cables – Specifications for test methods -
Part 1-1: Electrical test methods - General requirements
1)
EN 50290-1-2 Communication cables - Part 1-2: Definitions
3 Definitions
For the purposes of this E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.