SIST EN 4124:2018

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C

This document specifies the characteristics of self-locking shank nuts in NI-PH1302, silver plated on
thread, for use in 60° cone holes, for aerospace applications.
Classification: 1 210 MPa1 / 730 °C2.

Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH1302 (Waspaloy), Gewinde versilbert, für 60° Aufweitung - Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C

Diese Europäische Norm legt die Eigenschaften von selbstsichernden Einnietmuttern aus NI PH1302, Gewinde versilbert, für den Gebrauch bei konischen Bohrungen von 60° für Anwendungen in der Luft  und Raumfahrt fest.
Klasse: 1 210 MPa/730 °C

Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-PH1302 (Waspaloy), argentés sur filetage, pour sertissage 60° - Classification : 1 210 MPa (à température ambiante ) / 730 °C

Cette présente Norme européenne spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI PH1302, argentés sur filetage, pour utilisation dans des trous coniques de 60°, pour applications aérospatiales
Classification : 1 210 MPa / 730 °C.

Aeronavtika - Zakovičene matice, samovarovalne, iz toplotno odporne zlitine na nikljevi osnovi NI-PH1302 (Waspaloy), posrebreni navoji, za odprtine 60° - Klasifikacija: 1210 MPa (pri temperaturi okolice)/730 °C

Ta dokument določa lastnosti samoblokirnih sidrnih matic s posrebreni navoji iz NI-PH1302 za uporabo v konusnih odprtinah 60° v aeronavtiki.
Klasifikacija: 1 210 MPa1/730 °C2.

General Information

• Status: Published
• Publication Date: 05-Jun-2018
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 30-May-2018
• Due Date: 04-Aug-2018
• Completion Date: 06-Jun-2018
• Ref Project: EN 4124:2018 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C

Relations

• Revised: SIST EN 4124:2005 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
• Effective Date: 30-Nov-2016
• Replaces: SIST EN 4124:2005 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
• Effective Date: 23-May-2018
• Replaces: SIST EN 4124:2005 - Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4124:2018
01-julij-2018
1DGRPHãþD
SIST EN 4124:2005
$HURQDYWLND=DNRYLþHQHPDWLFHVDPRYDURYDOQHL]WRSORWQRRGSRUQH]OLWLQHQD
QLNOMHYLRVQRYL1,3+:DVSDOR\SRVUHEUHQLQDYRML]DRGSUWLQHƒ
.ODVLILNDFLMD03DSULWHPSHUDWXULRNROLFHƒ&
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa
(at ambient temperature) / 730 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH1302 (Waspaloy), Gewinde versilbert, für 60° Aufweitung -
Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à
base de nickel NI-PH1302 (Waspaloy), argentés sur filetage, pour sertissage 60° -
Classification : 1 210 MPa (à température ambiante ) / 730 °C
Ta slovenski standard je istoveten z: EN 4124:2018
ICS:
49.030.30 Matice Nuts
SIST EN 4124:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4124:2018

---------------------- Page: 2 ----------------------

SIST EN 4124:2018


EN 4124
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2018
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 4124:2004
English Version

Aerospace series - Shank nuts, self-locking, in heat
resisting nickel base alloy NI-PH1302 (Waspaloy), silver
plated on thread, for 60° swage - Classification: 1 210 MPa
(at ambient temperature) / 730 °C
Série aérospatiale - Écrous à sertir, à freinage interne, Luft- und Raumfahrt - Einnietmuttern, selbstsichernd,
en alliage résistant à chaud à base de nickel NI-PH1302 aus hochwarmfester Nickelbasislegierung NI-PH1302
(Waspaloy), argentés sur filetage, pour sertissage 60° - (Waspaloy), Gewinde versilbert, für 60° Aufweitung -
Classification : 1 210 MPa (à température ambiante ) / Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C
730 °C
This European Standard was approved by CEN on 22 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4124:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4124:2018
EN 4124:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Required characteristics . 4
3.1 Configuration — Dimensions — Tolerances — Masses . 4
3.2 Materials . 4
3.3 Surface treatment . 4
4 Designation. 6
5 Marking . 6
6 Technical specification . 6



2

------
...