SIST EN 2591-220:2006

Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling

This standard specifies a method to demonstrate the long term electrical stability of the conductor to contact joint in the EN 3155 series of product standards. The thermal cycling test is carried out using a combination of conductor current and "ambient" heat to achieve the appropriate maximum rated operating temperature.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren - Teil 220: Alterung von Kontakten und Leiteren durch zyklische Temperatur- und Strombelastung

Diese Norm legt ein Verfahren zum Nachweis der elektrischen Langzeitbeständigkeit der Verbindung von Leitern und Kontakten nach den Produktnormen der Reihe EN 3155 fest. Bei der zyklischen Wärmeprüfung wird eine Kombination aus Leiterstrom und
Umgebungswärme zur Erzielung der geeigneten maximalen Betriebstemperatur angewandt.
Sie ist in Verbindung mit EN 2591 100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 220 : Vieillissement des contacts et conducteurs par cyclage en température et en courant

Aeronavtika – Elementi električnih in optičnih povezav – Preskusne metode – 220. del: Staranje kontakta in prevodnika s cikličnimi tokovnimi in temperaturnimi obremenitvami

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 2591-220:2005 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cyclingPSHUDWXUQLPLREUHPHQLWYDPLSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 220 : Vieillissement des contacts et conducteurs par cyclage en température et en courantLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüverfahren - Teil 220: Alterung von Kontakten und Leiteren durch zyklische Temperatur- und StrombelastungTa slovenski standard je istoveten z:EN 2591-220:2005SIST EN 2591-220:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2591-220:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-220October 2005ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 220: Contact/conductor joint ageing bycurrent and temperature cyclingSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 220 : Vieillissementdes contacts et conducteurs par cyclage en température eten courantLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüverfahren - Teil 220: Alterungvon Kontakten und Leiteren durch zyklische Temperatur-und StrombelastungThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-220:2005: E



EN 2591-220:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Test method and requirements.4 5 Load and temperature cycling test.5 6 Measurements and requirements.5 7 Details to be specified.5



EN 2591-220:2005 (E) 3 Foreword This European Standard (EN 2591-220:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European S
...