Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments (IEC 61753-053-02:2022)

D133/C027: for all CLC/TC 86BXA revisions of standards, the dow is set to dow= dor + 12 months

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert änderbare optische Dämpfungsglieder für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung (IEC 61753-053-02:2022)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 053-02: Affaiblisseur optique variable commandé électriquement, à fibres unimodales, non connectorisé, pour la catégorie C - Environnements contrôlés (IEC 61753-053-02:2022)

IEC 61753-053-02: 2022 contient les exigences minimales initiales d’essai et de mesure, ainsi que les sévérités auxquelles un affaiblisseur optique variable commandé électriquement, à fibres unimodales, non connectorisé, doit satisfaire pour être classé comme étant conforme aux exigences de la catégorie C – Environnements contrôlés, selon la définition donnée à l’Annexe A de l’IEC 61753-1:2018. Cette première édition annule et remplace l'IEC 61753-053-2 parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 61753‑053‑2:2014: a) harmonisation des termes et définitions avec ceux de l’IEC 60869-1 et de l’IEC TS 62627-09; b) harmonisation des éléments soumis à essai et des conditions d’essai avec l’IEC 61753‑1:2018 et l’IEC 61753‑1:2018/AMD1:2020.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 053-02. del: Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodovna vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-053-02:2022)

General Information

Status
Published
Public Enquiry End Date
10-Feb-2022
Publication Date
19-Sep-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Sep-2022
Due Date
21-Nov-2022
Completion Date
20-Sep-2022

RELATIONS

Buy Standard

Standard
SIST EN IEC 61753-053-02:2022
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
oSIST prEN IEC 61753-053-02:2022
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-053-02:2022
01-november-2022
Nadomešča:
SIST EN 61753-053-2:2014

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 053-02. del:

Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodovna

vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-053-02:2022)

Fibre optic interconnecting devices and passive components - Performance standard -

Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical

attenuator for category C - Controlled environments (IEC 61753-053-02:2022)

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil

053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert änderbare optische

Dämpfungsglieder für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung
(IEC 61753-053-02:2022)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de

performance - Partie 053-02: Affaiblisseur optique variable commandé électriquement, à

fibres unimodales, non connectorisé, pour la catégorie C - Environnements contrôlés

(IEC 61753-053-02:2022)
Ta slovenski standard je istoveten z: EN IEC 61753-053-02:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-053-02:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-053-02:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-053-02:2022
EUROPEAN STANDARD EN IEC 61753-053-02
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2022
ICS 33.180.20 Supersedes EN 61753-053-2:2014
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 053-02: Non-connectorized, single-
mode fibre, electrically controlled, variable optical attenuator for
category C - Controlled environments
(IEC 61753-053-02:2022)

Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive

fibroniques - Norme de performance - Partie 053-02: Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit

Affaiblisseur optique variable commandé électriquement, à Steckverbindern versehene, elektrisch kontrolliert

fibres unimodales, non connectorisé, pour la catégorie C - änderbare optische Dämpfungsglieder für Einmodenfasern

Environnements contrôlés für die Kategorie C - Kontrollierte Umgebung
(IEC 61753-053-02:2022) (IEC 61753-053-02:2022)

This European Standard was approved by CENELEC on 2022-08-31. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61753-053-02:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-053-02:2022
EN IEC 61753-053-02:2022 (E)
European foreword

The text of document 86B/4622/FDIS, future edition 1 of IEC 61753-053-02, prepared by SC 86B

"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was

submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-053-

02:2022.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2023-05-31

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2023-08-31

document have to be withdrawn

This document supersedes EN 61753-053-2:2014 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 61753-053-02:2022 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 62343-1 NOTE Harmonized as EN IEC 62343-1
---------------------- Page: 4 ----------------------
SIST EN IEC 61753-053-02:2022
EN IEC 61753-053-02:2022 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification
for simplex and duplex cables for use in
terminated cable assemblies
IEC 60869-1 - Fibre optic interconnecting devices and EN IEC 60869-1 -
passive components - Fibre optic passive
power control devices - Part 1: Generic
specification
IEC 61300 series Fibre optic interconnecting devices and EN IEC 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
---------------------- Page: 5 ----------------------
SIST EN IEC 61753-053-02:2022
EN IEC 61753-053-02:2022 (E)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19:
Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examinations and measurements -
Polarization dependence of a single-mode
fibre optic device
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-14 - Fibre optic interconnecting devices and EN 61300-3-14 -
passive components - Basic test and
measurement procedures - Part 3-14:
Examinations and measurements - Error
and repeatability of the attenuation settings
of a variable optical attenuator
IEC 61300-3-21 - Fibre optic interconnecting devices and EN IEC 61300-3-21 -
passive components - Basic test and
measurement procedures - Part 3-21:
Examinations and measurements -
Switching time
---------------------- Page: 6 ----------------------
SIST EN IEC 61753-053-02:2022
EN IEC 61753-053-02:2022 (E)
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements -
Transient loss
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
---------------------- Page: 7 ----------------------
SIST EN IEC 61753-053-02:2022
---------------------- Page: 8 ----------------------
SIST EN IEC 61753-053-02:2022
IEC 61753-053-02
Edition 1.0 2022-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
variable optical attenuator for category C – Controlled environments
Dispositifs d'interconnexion et composants passifs fibroniques –
Norme de performance –
Partie 053-02: Affaiblisseur optique variable commandé électriquement, à fibres
unimodales, non connectorisé, pour la catégorie C – Environnements contrôlés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-4435-7

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61753-053-02:2022
– 2 – IEC 61753-053-02:2022 © IEC 2022
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 6

4 Test conditions ................................................................................................................ 7

5 Test report ....................................................................................................................... 7

6 Reference components .................................................................................................... 7

7 Performance requirements............................................................................................... 8

7.1 Dimensions ............................................................................................................. 8

7.2 Sample size ............................................................................................................ 8

7.3 Test details and requirements ................................................................................. 8

Annex A (normative) Sample size ........................................................................................ 13

Bibliography .......................................................................................................................... 14

Table 1 – Single-mode spectral bands .................................................................................... 7

Table 2 – Test details and requirements ................................................................................. 8

Table A.1 – Number of samples for each test ........................................................................ 13

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-053-02:2022
IEC 61753-053-02:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
variable optical attenuator for category C – Controlled environments
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

IEC 61753-053-02 has been prepared by subcommittee 86B: Fibre optic interconnecting

devices and passive components, of IEC technical committee 86: Fibre optics. It is an

International Standard.

This first edition cancels and replaces IEC 61753-053-2 published in 2014. This edition

constitutes a technical revision.

This edition includes the following significant technical changes with respect to

IEC 61753-053-2:2014:

a) harmonization of terms and definitions with those in IEC 60869-1 and IEC TS 62627-09;

b) harmonization of test items and their conditions with IEC 61753-1:2018 and
IEC 61753-1:2018/AMD1:2020.
---------------------- Page: 11 ----------------------
SIST EN IEC 61753-053-02:2022
– 4 – IEC 61753-053-02:2022 © IEC 2022
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4622/FDIS 86B/4644/RVD

Full information on the voting for its approval can be found in the report on voting indicated in

the above table.
The language used for the development of this International Standard is English.

This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

at www.iec.ch/members_experts/refdocs. The main document types developed b
...

SLOVENSKI STANDARD
oSIST prEN IEC 61753-053-02:2022
01-februar-2022
Optični spojni elementi in pasivne komponente - Tehnični standard - 053-02. del:

Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodovna

vlakna za kategorijo C - Nadzorovana okolja

Fibre optic interconnecting devices and passive components - Performance standard -

Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical

attenuator for category C - Controlled environments
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de

performance - Partie 053-02: Affaiblisseur optique variable commandé électriquement, à

fibres unimodales, non connectorisé, pour la catégorie C - Environnements contrôlés

Ta slovenski standard je istoveten z: prEN IEC 61753-053-02:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-053-02:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61753-053-02:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61753-053-02:2022
86B/4532/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-053-02 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-11-19 2022-02-11
SUPERSEDES DOCUMENTS:
86B/4474/CD, 86B/4506A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Fibre optic interconnecting devices and passive components - Performance standard - Part

053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical

attenuator for category C - Controlled environments
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:

Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 2 – 86B/4532/CDV
1 CONTENTS

3 FOREWORD ........................................................................................................................... 3

4 1 Scope .............................................................................................................................. 5

5 2 Normative references ...................................................................................................... 5

6 3 Terms and definitions ...................................................................................................... 6

7 4 Test conditions ................................................................................................................ 7

8 5 Test report ....................................................................................................................... 7

9 6 Reference components .................................................................................................... 7

10 7 Performance requirements .............................................................................................. 8

11 7.1 Dimensions ............................................................................................................. 8

12 7.2 Test details and requirements ................................................................................. 8

13 Annex A (normative) Sample size ........................................................................................ 13

14 Bibliography .......................................................................................................................... 14

16 Table 1 – Single-mode spectral bands .................................................................................... 7

17 Table 2 – Test details and requirements ................................................................................. 9

18 Table A.1 – Number of samples for each test ........................................................................ 13

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 3 – 86B/4532/CDV
23 INTERNATIONAL ELECTROTECHNICAL COMMISSION
24 ____________
26 FIBRE OPTIC INTERCONNECTING DEVICES AND
27 PASSIVE COMPONENTS – PERFORMANCE STANDARD –
29 Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
30 variable optical attenuator for category C – Controlled environments
32 FOREWORD

33 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

34 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

35 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

36 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

37 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

38 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

39 may participate in this preparatory work. International, governmental and non-governmental organizations liaising

40 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

41 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

42 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

43 consensus of opinion on the relevant subjects since each technical committee has representation from all

44 interested IEC National Committees.

45 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

46 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

47 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

48 misinterpretation by any end user.

49 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

50 transparently to the maximum extent possible in their national and regional publications. Any divergence between

51 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

52 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

53 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

54 services carried out by independent certification bodies.

55 6) All users should ensure that they have the latest edition of this publication.

56 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

57 members of its technical committees and IEC National Committees for any personal injury, property damage or

58 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

59 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.

60 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

61 indispensable for the correct application of this publication.

62 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

63 rights. IEC shall not be held responsible for identifying any or all such patent rights.

64 International Standard IEC 61753-053-02 has been prepared by subcommittee 86B: Fibre optic

65 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.

66 This first edition cancels and replaces the first edition of IEC 61753-053-2 published in 2014.

67 This edition constitutes a technical revision.

68 This edition includes the following significant technical changes with respect to the previous

69 edition:

70 a) Harmonization of terms and definitions with those in IEC 60869-1 and IEC TS 62627-09;

71 b) Harmonization of test items and their conditions with IEC 61753-1:2018, COR1:2019 and

72 AMD1:2020.
73 The text of this standard is based on the following documents:
FDIS Report on voting
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 4 – 86B/4532/CDV
86B/xxxx/FDIS 86B/xxxx/RVD

75 Full information on the voting for the approval of this standard can be found in the report on

76 voting indicated in the above table.
77 The French version of this standard has not been voted upon.

78 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

79 A list of all parts in the IEC 61753 series, published under the general title Fibre optic

80 interconnecting devices and passive components – performance standard, can be found on the

81 IEC website.

82 The committee has decided that the contents of this publication will remain unchanged until the

83 stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to

84 the specific publication. At this date, the publication will be
85 • reconfirmed,
86 • withdrawn,
87 • replaced by a revised edition, or
88 • amended.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 5 – 86B/4532/CDV
92 FIBRE OPTIC INTERCONNECTING DEVICES AND
93 PASSIVE COMPONENTS – PERFORMANCE STANDARD –
95 Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
96 variable optical attenuator for category C – Controlled environments
98 1 Scope

99 This part of IEC 61753 contains the minimum initial test and measurement requirements and

100 severities which non-connectorized single-mode fibre electrically controlled variable optical

101 attenuator needs to satisfy in order to be categorised as meeting the requirements of category

102 C-Controlled environments, as defined in Annex A of IEC 61753-1.
103 2 Normative references

104 The following documents, in whole or in part, are normatively referenced in this document and

105 are indispensable for its application. For dated references, only the edition cited applies. For

106 undated references, the latest edition of the referenced document (including any amendments)

107 applies.

108 IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for

109 class B single-mode fibres

110 IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for

111 simplex and duplex cables for use in terminated cable assemblies

112 IEC 60869-1, Fibre optic interconnecting devices and passive components – Fibre optic passive

113 power control devices – Part 1: Generic specification

114 IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic test

115 and measurement procedures

116 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and

117 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)

118 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and

119 measurement procedures – Part 2-4: Tests – Fibre or cable retention

120 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and

121 measurement procedures – Part 2-5: Tests – Torsion

122 IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and

123 measurement procedures – Part 2-9: Tests – Shock

124 IEC 61300-2-14, Fibre optic interconnecting devices and passive components – Basic test and

125 measurement procedures – Part 2-14: Tests –High optical power

126 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and

127 measurement procedures – Part 2-17: Tests – Cold

128 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and

129 measurement procedures – Part 2-18: Tests – Dry heat
---------------------- Page: 7 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 6 – 86B/4532/CDV

130 IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and

131 measurement procedures – Part 2-19: Tests – Damp heat (steady state)

132 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and

133 measurement procedures – Part 2-22: Tests – Change of temperature

134 IEC 61300-2-42, Fibre optic interconnecting devices and passive components – Basic test and

135 measurement procedures – Part 2-42: Tests – Static side load for connectors

136 IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test and

137 measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices

138 IEC 61300-3-2, Fibre optic interconnecting devices and passive components – Basic test and

139 measurement procedures – Part 3-2: Examination and measurements – Polarization dependent

140 loss in a single-mode fibre optic device

141 IEC 61300-3-7, Fibre optic interconnecting devices and passive components – Basic test and

142 measurement procedures – Part 3-7: Examinations and measurements – Wavelength

143 dependence of attenuation and return loss of single mode components

144 IEC 61300-3-14, Fibre optic interconnecting devices and passive components – Basic test and

145 measurement procedures – Part 3-14: Examinations and measurements – Error and

146 repeata
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.